Electric water heaters, domestic

Water began to warm in Switzerland in the 18th century. Almost three centuries ago in Europe began to use a water pipe from which heated water flowed. Already today, heaters have become so perfect that the consumer has the opportunity to choose flow and storage devices. They differ in different functions and abilities.

More compact are flowing. After all, through them, water passes instantly and heats up with it. With connection, any home master will be able to cope. To install such equipment, there is no need to prepare any special free space in the room. It will only be necessary to get an outlet in the installation area, and also pay attention to how often the device will be used.

Features of running water heaters brand "Aquatherm"

Electric water heaters "Aquatherm" have a single-lever mixer, with which you can get cold or hot water, and also make the head more or less intense. While the TEN works, the light will come on, so you can easily understand what is happening inside. The branch pipe is located at the bottom, there is threaded for flexible withdrawal, which you can buy at the store.

To replace the mixer , close the water, and then remove the old valve by installing a flow heater in its place. The water supply pipe is made of stainless steel, which corresponds to high hygiene requirements. The flow-through heater must be operated taking into account the elimination of damage to the device body. In the absence of water, the heater will not work, which guarantees economy.

Features of Atlant heaters

Electric water heaters are also available for sale by Atlant. They have a temperature control, and inside there is a ceramic heater, which provides high efficiency. The power is regulated by the rotary knob, while the outlet water temperature can vary from 30 to 85 ° C. The equipment regulates the head independently. The disadvantage is that the device is not able to feed water to the shower. It is intended only for the solution of simple household tasks by the type of washing dishes. With some restrictions, many consumers try to take a shower. In doing so, you must be prepared for a small flow of water.

In appearance, such water heaters flow almost nothing different from the above. The adjustment knob is located at the rear, and the stainless steel tube has a diffuser, so the water will pour a few thin jets. The cost of the device can be about 3000 rubles. That is why consumers consider this acquisition to be beneficial. To give this option is especially akakalen.

Description of water heaters "Evan"

Electric water heaters are offered by the manufacturer "Evan". It is a serious enterprise whose products deserve the attention of users. Equipment of this brand resembles professional devices, and their power varies from 6 to 120 kW. If we compare the instruments that were considered above, then the latter have a power of up to 2 kW.

As for the flow-through water heaters "Evan", their capacity reaches 3000 l / h. Such electric water heaters flowing household can provide water to a family of 5 people. The only drawback is that the extremely high water temperature reaches 35 ° C. With the help of this equipment, you can receive water for 5 toilets. This indicates that the device is able to supply water to a private cottage.

Features of water heaters brand "Termex"

Electric water heaters for domestic use are offered to manufacturers of "Termex". These devices do not provide for the presence of adjustments. The device is very easy to use. It has two power buttons, clicking on which you choose different power. This is called a rough step-by-step temperature control. Power can vary from 3.5 to 10 kW. The devices are designed for one bathroom and have two outlet nozzles. They are intended for a separate tap and shower.

Results: the choice of the water heater by the manufacturer

Electric water heaters, photos of which are presented in the article, can perfectly prove themselves in the kitchen and in the bathroom. Customers' testimonies indicate that for the first room it is best to prefer "Aquatherm" or "Atlant", whereas for the second one, "Termex" will suit. However, in the latter case, you should become more familiar with the features of connecting the device to the mains. This is due to the fact that some experts encounter problems installing these devices.

But for the supply of a private house it is best to prefer the brand "Evan". Choosing electric water heaters, household, reviews about which will allow you to make the right choice, you need to give special importance to the power. In the opinion of buyers, to provide one bathroom is suitable device, whose power is 4 kW. If this parameter turns out to be less, it will be suitable for one tap, and it can be kitchen to wash dishes and hands.

Features of single-phase water heaters brand "Atmor"

If you are interested in electric water heaters, household single-phase series "Coaxial 100", then you can consider the products of the brand "Atmor". The Israeli company has long been known in the Russian market. It offers a large selection of non-pressure water heaters of flow type. The power of the models can vary from 3 to 8.7 kW. The flask is made of plastic, with one of its sides there is a flange with TEN. Equipment is included in one of three capacities.

If we compare with a similar device, then we can note that the described in this section there is an electronic flow switch. Its price is much lower than the hydraulic one, which positively affects the final cost. Additional protection of the bulb is provided by the overpressure valve. This makes it possible to eliminate the rupture of the element during boiling.

Reviews of Clage Water Heater

These electric water heaters are flow-through, the reviews of which are only the most positive, are the most famous on the German market. According to buyers, they have less impressive power, but they have additional useful functionality. If we talk about the first parameter, then these models can vary from 3.3 to 8.8 kW. The design is the most original and modern, and the highlight, according to users, is an automatic pressure regulator, with which the equipment balances fluctuations in water pressure. As a result, it is possible to obtain a stable flow and outlet temperature.

Conclusion

Flowing water heaters can also be represented by nozzles on the tap. Their principle of operation is almost the same as a conventional mixer. The crane works instantly and is connected to a cold water hose. Heating is done inside the equipment, and after five seconds you can get water, the temperature of which reaches 70 ° C. Such a flowing water heater is made of a special alloy, which does not form scale and does not undergo corrosion.