The best paint for concrete for the floor is wear-resistant

Concrete floors in themselves are very strong and durable construction. However, in order to serve them as long as possible and look more effective, they must be painted. Varieties of funds intended for finishing finishing such surfaces, there are many. Paint for concrete for floor wear-resistant can be produced on acrylic, polyurethane, latex, etc. bases. Each of these tools has both its advantages and disadvantages.

Acrylic paint for concrete

This is a very popular variety, which can be used for both outdoor and indoor work. Manufacturers of products such as acrylic paint for concrete for floor wear, it is recommended to use it, including for finishing surfaces subjected to serious mechanical stress. For example, such compositions can be used to decorate the floor in a garage, in a warehouse, etc. After drying, the acrylic paint forms an elastic, strong film on the floor surface.

The advantages of this type of equipment include, first of all, ease of use and low consumption. An acrylic paint for concrete is usually applied in a single layer. It is allowed to use both brushes and rollers, as well as sprayers. Another advantage of acrylic paints is their environmental safety.

Epoxy products

This is, perhaps, the best paint for concrete for the floor, wear-resistant and very durable. The film formed by the epoxy composition is capable of withstanding very serious mechanical stresses. In addition, floors painted with a means of this type do not lose their spectacular appearance even if some alkaline compounds, engine oils, solvents, etc., are spilled on them, for example.

Looks concrete surfaces treated with epoxy paint, in fact, very beautiful. Use these tools can be used for painting floors in hangars, garages, repair shops, production workshops, etc. In addition, it is epoxy paints are considered the best option for finishing stairs and porches. These compounds do not turn yellow with time, they have good waterproofing properties and can be applied even to fresh concrete.

The drawbacks of this type of funds include, first of all, some difficulty in working with them. The fact is that any epoxy paint for concrete consists of two components, poured into different containers. Before use, they must be thoroughly mixed, following exactly the proportions specified in the instructions. And this, of course, is an additional waste of time. In addition, epoxy paints are quite high. Apply them in at least 2 layers. In this case, after the first treatment should wait at least a day.

To reduce the consumption of paint manufacturers of this type are advised to use special primers, also made on an epoxy basis. They increase the adhesive properties of the floor surface. The disadvantages of such a tool as epoxy paint for concrete, also include the fact that when used in the future it is quite difficult to change the color of the coating.

Polyurethane enamels

To the merits of the means of this variety is first of all the ecological purity, the possibility of application on the street and strength. In addition, the popularity of polyurethane enamels was won due to the fact that they give a very beautiful smooth glossy surface. In addition to concrete, such paints can be used for processing wood and metal.

The drawback of dyes of this type is, first of all, that they dry very long. Lipnut polyurethane layer stops only after 2-3 days after application. The full strength of the film accumulates in a week, and maximum resistance to the action of various kinds of chemically aggressive substances - after two.

Like epoxy, polyurethane dyes consist of two components. That is, before using this type of agent, it is necessary to mix. Apply them to the surface of the floor in two layers at a temperature of not less than +5 degrees and humidity 75%. Like epoxy, polyurethane paint for concrete for the floor - wear-resistant and durable.

Urethane-alkyd paint

Means of this variety are also sometimes used for painting concrete floors. But they are used exclusively for the treatment of indoor surfaces. Their advantages include, first of all, ease of application. You can paint floors with their use with a brush, roller or spray. Processing is carried out in at least two layers.

The urethane-alkyd paint gives quite an attractive appearance film. Its disadvantage is that it is only allowed to use it for painting surfaces that are not subjected to very serious mechanical stresses.

Cost of paints

The price for the above described means can be different. So, acrylic paint costs about 150-200 rubles / kg. For a kilogram of epoxy, about 300-400 r. A little bit cheaper is polyurethane paint for concrete. The price for it varies between 250-300 rubles. Per kilogram. The urethane-alkyd paint is sold for about 400 rubles / kg.

Consumption

Of course, the final cost of work will depend, among other things, on such an indicator as paint consumption for concrete. Under different conditions of use, this indicator, of course, can vary. However, on average acrylic paint takes about 0.3 kg per 1 m ² , epoxy - 0.2-0.25 kg per layer, polyurethane - 0.25-0.5 kg.

As you can see, all the means described above differ in very good performance characteristics. For the coloring of concrete floors, you can choose absolutely any of them. The main thing is that the purchased composition should be issued by a trusted company with a good reputation.