Automation for swing gates with your own hands: scheme and tips for manufacturing

The main convenience of automatic swing gates is that you can close or open them using the remote control. Every person today wishes to make his life as comfortable as possible. That is why the owners of private houses or their own garages are increasingly encountered automation for swing gates. With your own hands, you can mount it fairly quickly, while getting an excellent result.

System Features

It is necessary to understand how the whole system works. Automation of the gate is possible through a drive that is mounted directly to the gate. The automation kit for the gates is not difficult to mount by yourself. The installation process can not be called so simple. Here it is required to observe a clear sequence of actions combined with precision and qualification at each stage of the work. There are several features when installing the drive. You need to take into account the leaf in relation to the height of the pillars. If the installed automation does not assume the presence of limit switches, then it is required to install the swivel head stops. If you omit such an important nuance, you can get a completely unexpected result. The electric motor will fail, and the functioning of the entire structure will be difficult to call normal.

Equipment

A lot of elements contain a complex such as automation for swing gates. With your hands it will be possible to mount it only if all components are present. For the correct and qualitative installation of the gate you need to understand this and have minimal experience in solving such issues. The automation package contains: 1 control unit, 2 actuators, 1 set of photocells, a small beacon and a remote control. As advantages of this type of mechanism can be called a long service life and exceptional durability. The mechanism is simple in operation, and the gate opens at a speed of up to 15 seconds. Among the shortcomings can be identified such a moment as the presence in the path of the gate movement at least one obstacle, because of what the drive may well fail, and this leads to jamming. Before the opening there should be no obstacles. Only in this case it can be expected that automation for swing gates with their own hands will function for a long time without failing. Carrying out of preventive measures will allow to exclude malfunctions at work of the equipment. All parts requiring it must be periodically lubricated with special substances. When the automation is out of order, it is strictly forbidden to exert physical efforts when it is necessary to open the gate, there is only one solution - to call the master.

Homemade drive

As it was already possible to understand, with a strong desire for automation for swing gates with their own hands - this is not so unrealistic idea. This is a pretty good way to save your own money. If to this business you have not only practical interest, but you are interested in realizing the idea itself, then this is the case for you. And this is quite a fascinating process.

Required items

The satellite antenna mechanism is used as the main element of such a drive. In its set of equipment includes a worm gear, replacing the electric drive. The basis of the satellite television system consists of a mechanism for turning action. This is the engine that can be used to install automation. The worm gear operates according to a principle similar to that of an electric drive. This option is more advantageous in comparison with the store drives, since its operation requires a voltage of 36 volts, and for the store - the usual network of 220 volts. For assembly, you need to get two working drives from satellite antennas. Choose models that have the longest stock. It will take another console and transformer, its power should be 36-40 watts. The panel is used to open the structure and close it. It should work at a distance of about 50 meters. In addition, it would not hurt to stock up on two key fobs that are sold in stores selling goods needed in the field of security.

6 hours will be enough to collect the drive. To ensure that the automation for the gate with its own hands operated qualitatively, it is required to equip it with a current relay. In its absence, the motor can overheat and break. And with it, you can easily make a drive for the gate with the most minimal investment. If you prefer assembly, you can save on installation.

Installation process

When installing the electric drive for swing gates, it is necessary to take into account the opening side of the door leaf: outward or inward. So, if you are interested in how automatic automation is installed for the gate with your own hands, then you need to list the necessary tools for these purposes. You will need: a drill, a hammer, pliers, a construction meter, a screwdriver, an electrical tape. In automatic gates, unlike conventional gates, there is an electric drive. Therefore, before installing it you need to decide which option to choose.

Types of electric drives

Electric actuators can be linear or lever. To accurately determine the choice, you need to know the distance between the loop and the inside of the post. With a distance of up to 1.5 cm, a linear drive is required. Its cost is much lower than that of the lever. If the measured distance is 1.5-3 cm, then it is appropriate to install the lever type of the drive. It is as reliable as linear.

The gate automation circuit assumes that it is required to install not only a drive, but also a set of equipment. It is important to determine the width of the leaf, as well as the possible wind oscillations. Many are afraid to install all this equipment on their own, as they do not have the necessary experience and knowledge. But here it is important to remember the need for attention to detail, then there will be no problems with the installation.

How it's done?

It is important to check that the movement of the leaflets is easy when the drive is started. If something hinders this, then it is required to find the cause and eliminate it, since the motion of the electric drive must be level. Otherwise, it is possible that the post may bend, the angle of movement will shift, and this will have a negative effect on the automation of the entire structure. After eliminating a variety of problems, you can proceed to the automation installation process. It is important to follow the instructions as precisely as possible so that the operation of the system is as long as possible.

The usual scheme

Automation for swing gates with their own hands is installed on products opened inwards, it is appropriate to use any electric drive. When using steel poles as a base, it is appropriate to install a linear actuator. It is compact and reliable, and its cost is relatively low. You can use a lever drive, but it's much more expensive. A difficult option in the presence of brick columns and the gate in the middle. In this case, the linear drive is not suitable.

Automatics of the lever type are mounted on the pole, the gates being opened at the expense of the levers, at the same time they should be no more than 200 mm from the poles.

The gates open outwards

In this case, two types of devices are available for use, however, the correct choice will be automatic for garage doors with a linear mechanism. This is a cheaper and better solution. The automation is mounted in the opening, but takes no more than 150 mm on both sides. The system is attached to the narrow gate at the top. The drive is usually mounted directly on the pole. Automation for swing gates with their own hands is installed so that the hydraulic drive allows them to open outwards. Next, the bracket of the fasteners is welded to the structure. When opening the gate with a linear drive should be 1 cm free travel. After that, you can check the correctness of the leaf movement and movement of electric drives. In the next step, you need to install the stops for opening and closing, and then attach the motors. In the end, you need to equip the jumpers, connect them to the consoles, and turn on the mechanism. If one leaf is to move in another direction, then it is necessary to swap the wires on the motor.

Final work

After that, the automation for the swing gates with their own hands must be equipped with limit switches. If you did not provide for the use of such elements, then it is required to expose the leaf operation period on the board, as well as the opening and closing force. Do not set the maximum effort, as this reduces the life of the device. It is recommended to set a minimum effort in order to open the gate normally.

Further it is required to build in an alarm lamp, and also a special photo device. The gates that open outwards will work very well with this kind of automation.

Problems and Errors

Quite often there are cases where people mount everything with their own hands, but do not cope with this task because of insufficient experience. This leads to a mass of errors, because of which the automation refuses to work, and the drive completely fails. Everything should be connected in stages, as this will help to correct any problems in case of errors. Otherwise it will be very problematic to establish the cause of the failure. Correct and accurate installation in conjunction with a high quality electric drive allows the gate to function as long and correctly as possible. Even if you use automation for sliding gates, you will quickly be able to assess how convenient it was for you to call in. This is especially noticeable in winter, when you do not want to leave the warm interior of your car to open the cold gates.

Automation of sliding gates with own hands

To protect the entrance area on the territory of different purposes, sliding gates can be used, which work with the use of special automation. In this case, too, there are certain features of the installation. Automation for sliding gates with their own hands is established by stages. To begin with, it is required to weld a steel cantilever tube to their design. In the process of operating the entire structure, it moves along rollers mounted on a specially organized foundation. Automation for the gate Came is well proven. In the closed position, the lower corner of the gate is rolled by the end roller into the trap. During the opening of the web, this movement helps prevent transverse vibrations of the device.

Automation for sliding gates should be mounted taking into account certain moments:

- Installation of such structures begins with the arrangement of an independent foundation, as well as the foundation located in the opening and side of it, in the side of opening the entire structure;

- the fastening of the gate and the frame itself must be characterized by a high degree of resistance to winds;

- installation of a special holding part is required, by means of which it is possible to increase the width of the web design in the direction in which the gate opens;

- The sliding gate system must be provided with an effective protection against hacking, as well as a special type of protection against various unfavorable factors.

conclusions

Now you know how to install the automatic swing gates with your own hands. If you have a strong desire, you must strictly follow the instructions to get the desired result. It is important to note that the automation for sectional doors is installed in a similar way. Therefore, you should not have any difficulties with the installation process.