How to install a washing machine?

Modern household appliances is a good helper in the house. A necessary attribute of the hostess has long been a washing machine with automatic control. After purchasing such a product, you should carefully read the recommendations on how to install a washing machine. Initially, it is necessary to measure the area where it is planned to install the equipment. The solution of such a question requires accuracy: the dimensions of the machine must be slightly smaller than the dimensions of the space for its placement.

How to install a washing machine?

Stages of installing washing machines are as follows:

1. Remove the back of the equipment.
2. The removal of the transport bolts, with the help of which the
Fixation of the tank of the machine.
3. Remove the sealing rubber (if any).
4. It is recommended to install the household appliance so that the length of the drain hose does not exceed one and a half meters.
5. Making the technology stable by aligning it across all planes of dimensions.
6. Filling gaps between the walls of the machine and a number of standing furniture with rubber straps to prevent excessive vibration.
7. Bring a tap for water (separate).
8. Install the shut-off valve on the existing tap to supply water to the washing machine. The presence of such a detail is necessary to avoid flooding the premises.

Proper installation of the washing machine should not imply draining the water in the bath or sink. This brings unnecessary inconvenience: the impossibility of using a bath or a sink during the operation of the machine, deterioration of the connection quality, clogging of the siphons of the sink and bath, deterioration of the aesthetic appearance of the equipment.

The best way to install a weir is to connect household appliances directly to the sewage system through a siphon (with an additional branch pipe and valve). Details are necessary to prevent water from entering the sewer or sink into the machine. In addition, it is recommended to fix the drainage hose above the outlet to the sewage system by 0.6 - 0.8 meters. The next stage is the connection to the siphon of the free end of the hose through a special bend.

How to connect a washing machine - machine to the electrical network?

To connect the washing machine to an electrical network, proceed as follows:

1. Conduct a copper wire with a cross-sectional diameter of 2 mm from the electrical panel .
2. Install a circuit breaker, which will turn off the electricity in case of overload.
3. Make a grounding for the purpose of safety when working with the device.

If there are no skills in how to install a washing machine, then the work should be entrusted to specialists.

The final step in connecting the washing machine is to start it idle. The process is performed without loading laundry, but with a powder for washing. Powder is needed to clean the remnants of conveyor assembly equipment (grease, debris). At start of idle work the check is made:

- speed of water filling;

- process of weir and spinning;

- whether the water is heated.

To install a washing machine automatic mode should have a hard base (ideally - floor concrete). Vibrations are increased by floors made of wood, with flooring of linoleum and rugs. To eliminate noise, rubber stands can be used.

If you want to read more detailed recommendations how to install a washing machine, you can on the Internet sites of the relevant subject. The process of installing and connecting household appliances does not require special skills. However, you must strictly follow the security measures and follow the order of the steps. With the seeming complexity of the process, still installing the washing machine with your own hands is feasible. A competent approach to solving this issue will make it possible to achieve long-term maintenance of household appliances.