Stork for the garden with their own hands: three unique ways of handicrafts from improvised materials

Stork for the garden with your own hands made of plywood is very simple. To do this, do not look for a place in the garage or rent a storage room: a fairly spacious kitchen and mother-in-law, a great fan of crafts.

To make the process go quickly, buy in the building materials market a six-millimeter sheet of plywood and paint that go to renovate the facade of the house. The tool, if not enough, ask the neighbor or rent it. Stork for the garden with their own hands - an interesting piece, but a little capricious. Patience is the main condition for doing the work, otherwise you can delay the work so much that close relatives will rather buy metal figures than they will wait until you are inspired.

To make a stork for the garden with your own hands was made in a few days, follow the tips:

1. The piece of plywood should be rectangular, with sides of 850 and 580 millimeters.
2. Paint is better to take white. To her, buy a black and red dye. With competent breeding, you will receive an exceptionally persistent color.
3. Do not refuse waterproof varnish: it will help protect your product from rainfall.
4. Sandpaper is enough and half a meter.
5. Use a jig saw to use electric.
6. Brushes - at your discretion.

With copy paper, transfer the stork outline to the plywood, if the picture is already printed on a thin newspaper sheet, plug the power cord of the jig saw into the socket and gently cut out the body of your stork. To poultry "put on their feet", you can also stand out the remains of plywood.

Edges grind pieces of sandpaper, cover with the first layer of varnish, allow to dry. Now you can take paint. Prepare 3 kinds - red, white, black. The first tone is on the nose, the second on the trunk and up to the middle of the wing, the third is let into the empty seats. Leave for 8 hours. Check the paint for durability and apply another coat of varnish on top.

You can put steel wire or thin reinforcement on your feet. Mount it to the trunk and stand, cover with red, the places for the eyes deepen with a few strokes of the hammer, fill the potholes with black varnish for furniture and leave for a day. If there is no reinforcement, then you can use old ski poles. Stork for the garden with their own hands and on the ridge of the roof is paved if desired, if you tie the body to the mop, the wide part of which goes under the rafters, where it is nailed.

What else can you do for the garden with your own hands? Fly agarics from hemp and pelvis, figurines of animals from cans, a unique bed in pink tones.

But the stork is somehow closer to the heart of the Russian people. From gypsum and clay, you can also mold this noble bird, with one bottle of plastic, 500 g of gypsum, gauze bandages and metal rods that bend well, 3 cans of mounting foam.

Arbors for the garden with their own hands, too, do not difficult. If there is a picture or a model of a gazebo from the wire before your eyes, then, having the skills of a welder, you can "bungle" the Chinese construction for 5-6 days.

While you are spending electrodes, ask your beloved mother-in-law to sew sidewalls and roofs out of the canvas, and the wife - to pull the material onto the iron skeleton. Buy cheap furniture and enjoy the conversations under the merry rumble of the boiling samovar.