How to weld the hinges on the gate yourself. Features of the choice of loops

Every household plot needs proper protection. Therefore, the owners protect it with a fence. The gate is an important element of this design. From their proper functioning depends not only the comfort of the owners, but also the safety of their property. Having decided to perform the fence in-house, it is necessary to familiarize yourself with the technique that explains how to weld the hinges to the gate.

This will require special equipment and at least the most basic skills in welding. This process is quite possible to perform independently.

Characteristics of welding loops

Getting acquainted with the technology, explaining how to weld the hinges on the gate, you should consider all the subtleties of this lesson. Even experienced craftsmen face difficulties. A person who has no experience in carrying out such actions will have to overcome many difficulties. Therefore, you need to be patient and allocate enough time for this work.

Given all the recommendations of experts, even a novice wizard will be able to perform the installation correctly. In order to qualitatively assemble a garage gate, a fence for the site, it is necessary to know several features of performing similar actions. It is quite difficult to weld movable elements to the round pillars of the gate. In this case, additional plates will be required. Using the recommendations of specialists in the selection and installation of hinges, you can get a quality, strong wicket.

Preparatory stage

Before starting work it is necessary to prepare a tool and also to observe the requirements of labor protection. Solving the problem of how best to weld the hinges on the gate, you need to find the right tools. The result largely depends on this.

In addition to the welding machine, the master will need a hammer, a Bulgarian, and also a tape measure and a building level. Next, you should take care of safety. Welding is allowed only in a protective mask and mittens. After all, this is a rather insecure equipment. If improperly handled, it can be harmful to health. Also it is necessary to carry out welding in specially prepared for this place. There should be no dry grass, flammable objects and materials. If these rules are not observed, a fire may occur.

Types of loops

There are many types of loops that are suitable for the wicket. Each of them has its own characteristics. This is taken into account when choosing. Loops in the form of a cylinder are suitable for light gates. Their maximum permissible load does not exceed 400 kg. If the structure has a large weight, use reinforced hinges for the gate in the form of a cylinder. Here the load is up to 600 kg. The most reliable loops have three sections. When using them, the gate does not sag, they are extremely difficult to crack.

Original and very beautiful look forged hinges. They are suitable for wooden wickets and fences. The hinge bolt is also another option for heavy-duty gates. Their mechanism has hinges. They are easy to install. The adjustable version is used for lightweight structures up to 200 kg. They have the ability to change the position of the leaflets in height.

Choosing loops

The hinges must be chosen in accordance with the design features. For example, when deciding the question of how to weld the hinges on the gates of profiled sheeting, you should give preference to more simple designs. They are designed for light weight. Their advantage is low cost. For light fences and wickets it will be an ideal option.

Reinforced hinges with a bearing are suitable for heavy wings. The cost of such details is relatively large. But due to the shape features in such loops, the load is redistributed. This extends the life of the entire system. Quality loops do not produce extraneous sounds. Their course is very soft.

Also, expensive varieties are equipped with anti-burglary elements. This prevents thieves from squeezing or removing the wicket doors.

Welding process

There is a certain technique, explaining how to weld the hinges on the gate. This will require mounting plates. They are necessary for an even distribution of the weight of the leaflets. The plates are welded to the loops. The shape and size are selected according to the dimensions and weight of the leaflets.

The process is best performed together with an assistant. The gates rise vertically. The level is checked for their even position. Then you need to attach the hinges to the gate at the attachment points. It is necessary to make sure that they are at the same level and parallel to the edge of the gate.

The welding process starts with the flaps. Loops are mounted to them. After this, weld the structure to the posts. In this case, only small welds should be made. So, if necessary, you can correct the leaf. If all elements move correctly, the gates are not skewed, you can proceed to a clean seam. It is necessary to control its quality. At the final stage, they clean the seams with a Bulgarian.

Gates made of corrugated board

Doing a garage gate or fence doors from the corrugated board, you should adhere to a slightly different technique. Initially, it is required to build several jumpers, which will run parallel to the upper and lower parts. These details are fixed with the help of angles. The jumpers must divide the blade into 3 equal parts. Loops are welded to them. When the work is finished, the corrugated sheet is screwed from above to the hinges.

Having familiarized with the technology telling how to weld the hinges on the gate, everyone can do this work independently. Carrying out all the actions neatly, you can get a very good result.