How to make a lighter with your own hands?

A lighter is a very useful tool that helps us both in everyday life and far beyond the city. Despite its low cost and availability in stores, many craftsmen try to make it themselves. You probably will not need these skills, but you will agree that not all of your friends and acquaintances have such a homemade device. A homemade lighter is done quite simply. And you can make it almost from improvised materials. How to make a lighter with your own hands? The answer to this question is given in this article.

How to make a lighter from the cartridge case?

One of the simplest ways is to make a device from the cartridge case. Here we will look at several methods and options. In the first among the materials you will need a new zippa, a sleeve, a burner, and also a silver-copper solder. What to do with these tools? To begin with, you need to gut the flint from the zipp and get out a metal disc that emits a spark. After that, disassemble all other parts of this element - the filter, packing and fastening of the disk. These parts should be assembled and welded together. If on some element you have found roughness, remove them with a soldering iron, thereby giving it the correct shape. Then all the contents are clogged into the sleeve, the wick is inserted and fuel is poured over it. Everything - the lighter is ready for use.

Other ways

To use the second method, you will need to prepare a narrow metal tube. In it, you need to make a hole for the wheel. Place a special flint with a spring there. Remember that the first element should be with a small rubber band. Even from a durable alloy or metal, make a lighter cap with the wick. Then solder to the sleeve a metal tube and fill the top of the device with fuel.

The third method of manufacturing involves the use of parts such as a sleeve and a cotton cord. At the first stage, the cord must be cut off, moistened in gasoline and lowered into the sleeve. Next, it is necessary to ensure the interaction of the device with flint - for this, leave the outer part of the wick peeking out. The flint itself is made from a file. How to do it? To do this, solder a small piece of the file (no longer than 5 centimeters) to the sleeve and fill it with the last gasoline. Everything - the device is ready for use.

How to reanimate the old gasoline lighter?

If in the previous methods we told you how to make a gasoline lighter from improvised means, then in this way we will consider how you can reanimate the old device and make it anew for workers. But before you get down to work, a couple of words about tools and materials.

So, what materials do we need for this?

In the course of the work, you need to prepare several copper tubes with a diameter of 5 and 15 millimeters, two couplings, a pair of gears and one zippu. The latter can be taken from a conventional gas-powered cigarette lighter made in China.

Just note that to make a device with the same ignition mechanism, as it was before, with the help of these components you will not be able to do it - you only need to have original spare parts for this. And it is extremely difficult to do this - it will be much easier to buy a new one in the store than to suffer from the old one.

To ensure that the mechanism of opening and closing the lighter is not excessively flimsy, the body must be monolithic. Otherwise, when using the elements of the device will constantly move to the side.

How to make a gasoline lighter? The principle of resuscitation of the old lighter is quite simple - all the prepared elements are installed in place of the old ones, and the tool's capacity is filled with gasoline. In order that the fuel does not evaporate, it is recommended to install a cap here. However, due to the flimsy design of its part will always cling to the gear, so for frequent use of such a device is not suitable.

In conclusion about gasoline lighters, we note that all the basic details, namely flints, change in it, and therefore serve such an apparatus will be very, very long.

We make the device from the battery

How to make a lighter from a battery? To make this element in a similar way will be even easier than all the others, so if you have at least a minimum of spare time to work on making lighters, use this method. And it consists of only a few stages.

Initially, the main materials are prepared - a 12-volt battery and a piece of conventional foil. As an alternative to take a wrapper from chewing gum - the essence of the matter does not change it.

How to make a lighter next? The next step is a small fold in the middle of the folded foil sheet. After the folded piece is closed at the ends of the battery (polarity "+" and "-" respectively).

As soon as both contacts are closed, a small "fire" will form at the folding point of the foil. Of course, in terms of reliability, this lighter is not very convenient to use, but in nature, especially at a picnic, such a thing is definitely not a problem.

So, we found out how to make a lighter from the materials at hand.