How to disassemble the door handle of the interior door: diagram, photo

The handle is certainly an important functional element of any door. Modern manufacturers supply mainly only high quality fittings. However, to change door handles to new ones sometimes, unfortunately, still have to. Some apartment owners prefer to entrust this procedure to hired craftsmen. But since, in principle, the answer to the question of how to disassemble the door handle of the interior door is not complicated, if desired, you can save yourself and cope with this procedure yourself.

When to replace

In this article we in all details and we will consider how to disassemble the door handle of the interior door. Of course, photos of this operation will also be provided to the reader.

Actually, the replacement of the handle of the interior door may be necessary in the following cases:

1. With a breakdown. This is one of the most frequent reasons for the need for dismantling. The mechanism of the door handle with time either due to heavy use, or as a result of rough handling of the canvas wear out. Some parts fail, and the hardware stops performing its basic functions.
2. If you need to install a new model. Technologies in our time are developing very quickly. And that's why the door handles of ever more perfect design appear on the market.
3. Repair in the house. This can also cause the need to remove the door handles. After all, when repairing the interior of living quarters often changes in the most cardinal way. As a result, the design of old pens can make disharmony in the design.
4. The appearance of abrasions on the handle itself. Decorative coating of the main part of such accessories due to intensive use with time begins to wear off. Shabby handles of interior doors, so they do not spoil the overall impression of the design of premises, of course, also worth replacing the new ones.

What may be required

Before you start dismantling the door handle, you should, of course, prepare all the necessary tools. To disassemble this element, the home master will need:

• screwdriver;
• An awl, a nail or any other sharp and thin metal object.

Actually, in the place of work, of course, you need to ensure good lighting. Some elements of the door handle design are small in size. With a small amount of light, they can simply get lost.

Varieties of door accessories

How to disassemble the handle of the interior door, we will consider in full detail in the article below. First, let's see what, in fact, exist in the market for a variety of such accessories. After all, the way to remove the handle depends, of course, first of all on the features of its design. Modern doors can be delivered to the market with the accessories of this group:

• Stationary;
• Rotary;
• Pressure.

Also, interior doors are often equipped with special knobs, closing, including the key.

Stationary models

The peculiarity of the design of this fittings is that in most cases it is in no way connected with a latch and a lock. The stationary handle is used only for closing and opening the door itself. This type of fittings is fixed directly to the canvas, most often with the help of screws.

How to disassemble the interior door handle stationary

To remove the fittings of this version from the canvas, the home master will only need a screwdriver. Disassemble the stationary U-shaped handle as follows:

• Unscrew the screw on the main part;
• Remove the handles.

Such a simple technique can serve as an excellent answer, including the question of how to disassemble the round door handle of the interior door rod. When removing such accessories, as well as the usual (in the form of a bracket), the screws often have to be unscrewed only on one side.

In some cases, the stationary handle can be supplemented by a mechanical latch. This variant of the hardware is dismantled as follows:

• With a screwdriver, the fixing screws are carefully loosened;
• Decorative covers are removed;
• From the metal lintel a rod with a hat is removed;
• The handle is removed from one side;
• On the other hand a tetrahedral jumper is removed.

How to disassemble the door handle of the interior door: the scheme for dismantling the rotary accessories

Stationary structures on the doors are used very often. But many modern interior models can be equipped with easy-to-use rotary knobs. The accessories of this variety consist of the following elements:

• On the knob, rotating around its axis;
• A latch or a latch.

The angle of rotation of the knob at such handles is limited only by the amount of stroke of the latch. The main advantage of the accessories of this variety is compactness.

Of course, many home masters would like to know how to disassemble the handle of the interior door and such a variety. Dismantling of the rotary fittings is carried out according to the following procedure:

• Decorative linings are removed from the canvas;
• A sharp end of an awl or nail is inserted into the lateral technological hole;
• The pin is retracted;
• Actually, the pen and cap are removed.

At the final stage, the home master needs to latch the latch and remove the decorative flange.

Press fittings

Handles of this variety have an L-shape. They are equipped with pressure fittings mainly office interior doors. But sometimes they complement the canvas and household models (most often plastic). When you press this knob, the toggle lever begins to move, and the door opens.

How to disassemble

Dismantling of the pressure handle begins with the removal of the cover located next to the lever. To remove this part, you should:

• Press the rotary latch stopper;
• Pull the shaft and the handle.

For convenience, at this stage it is worth using an awl or nail. After the overlay is deleted, you need:

• Unscrew the fixing parts of the handle screws;
• Remove the tetrahedral rod;
• Remove the second overlay;
• Remove the remaining parts of the handle.

Knob handles

The accessories of this variety, in fact, belong to the class of rotary. However, in the design of such pens, among other things, there is also a keyhole and a fixing button.

Dismantle the handle-nose

Next, let's see how to disassemble the door handle of the interior door with a latch and lock. For the dismantling of such accessories, in addition to a screwdriver, the home master also needs a special key with an emphasis. The latter usually comes complete with the handle itself. Disassemble the nose as follows:

• Screw a screwdriver and remove the cover;
• Push open the stopper with an awl or nail;
• Remove the knob;
• On the side of the removed handle unscrew the two screws;
• Remove the liberated parts of the structure.

At the final stage, unscrew the screws holding the latch. Then you just need to remove the last one from the canvas.

Instead of concluding

Thus, we have found out how to disassemble the door handle of the interior door with the lock, the usual rotary, push or stationary. Dismantle all these types of accessories, as you can see, quite easily. However, to perform the disassembly procedure, of course, should be as accurate as possible. In particular, a cautious home master should be using a screwdriver or an awl. Breaking these sharp tools can very easily damage the decorative coating of the door leaf itself. And this, in turn, of course, will have an extremely negative impact on the appearance and the whole room as a whole.