How to cover the roof with roofing paper with your own hands? A photo

Perhaps no one will argue that the roof can be called the main element of the house. It performs a huge number of very different functions. It is necessary not only to protect housing from a variety of precipitation, but also acts as an important component in the design of the building. It is for this reason that the construction and repair of the roof must be approached responsibly. How to cover the roof with roofing paper with your own hands? This will be discussed in the review.

Benefits of Ruberoid

Why is this material considered one of the best? It is traditional in the event that it is planned to make a soft roof. In addition, the roofing material perfectly copes with a variety of tasks that are assigned to it. The material quickly fits and effectively protects the construction from precipitation. In addition, ruberoid is characterized by durability. He can serve for about 40 years. And sometimes this term increases.

What coatings can I use?

Before answering the question of how to cover the roof with a ruberoid with your own hands, it is necessary to understand what types of material exist. At the present stage, this coverage overflowed the construction market. You can use the traditional option, and you can buy a completely new material. We are talking about euroruberoid, or, as it is called properly, a polymer-bitumen membrane directed. So, you need to know what material to use to answer the question of how to cover the roof with a ruberoid with your hands.

Traditional material

Traditional insulation coating. This is an ordinary cardboard, pretreated on all sides with dense bituminous material. It has an additive. This is a bitumen modifier. Because of it, ruberoid does not have high strength. But the coating, based on fiberglass, is more resistant.

The use of euroruberoid

This kind of building material replaced the traditional roofing felt. At the present stage, this coating is widely used in construction works of almost any kind. In its structure, the material resembles traditional material. However, technological features of production differ. Accordingly, different mechanical and physical parameters (flexibility, strength, resistance to high temperatures, durability).

When creating the top layer, a special coating (granite or basalt) is used. The lower layer is covered with a thin antiadhesive film. It does not give the opportunity to glue together rolled up material. To all other things, answering the question about how to cover the roof with a ruberoid with your own hands, it should be noted that this film acts as a kind of regulator. Its melting signals that the bitumen has warmed to the required temperature.

The quality of the material is indicated by its weight. It is he who is able to demonstrate how much bitumen is present in the coating. The more weight, the better the product.

A new generation of coatings

The question of how to cover the roof of the garage with roofing paper by own hands is quite relevant. And for this purpose you can take advantage of a completely new kind of traditional material. It is a self-adhesive coating. He is referred to a new generation. Adhesive parameters of this material will begin to activate during the arrival of solar heat. Due to this, it is possible to perform works aimed at laying the coating, quickly, without putting much effort. Accordingly, the time will be largely saved. And the question of how to cover the roof of the garage with roofing paper by hand, will cease to torment.

Basic rules of laying the material

Each person is able to perform work aimed at laying a roofing felt on the roof. Gold hands for this have absolutely not necessarily. You can do the work alone. But it is necessary to comply with the basic rules. In addition, you should familiarize yourself with some of the subtleties that can significantly affect the result of work.

Alignment of the working surface

How to cover a wooden roof with a ruberoid with your own hands? First of all, the foundation must be prepared. To do this, remove from it all that is superfluous (garbage, building materials, dirt, dust). The surface will need to be leveled. Great differences, dents should not be. Wooden roof can be made even by using additional bars or racks. In doing so, you should use a laser or hydraulic level. But wooden roofs usually do not require serious leveling. If the surface is not made of wood, then a screed should be used to level it. Its thickness should not be more than 1 cm.

It is advisable to set beacons using a string. Such a "level" will considerably simplify the work on leveling the roof. It should also be borne in mind that the surface on which the work is done should be completely dry.

Application of mastic before laying

How to properly cover the roof with roofing paper with your own hands? After leveling, apply mastic. This operation can be performed using a brush or roller. Much depends on the size of the roof. Do not hurry and immediately proceed with the laying of the main material. Wait a bit. The applied mastic must dry, grasp the surface. The time that may be required for this is indicated directly on the bank with the building material. But it can be adjusted, guided by the air temperature and humidity.

So that the question of how to cover a pitched roof with roofing paper with your own hands (or some other surface) did not cause problems, we must prepare the material. To do this, it should be laid out in its entirety within 24 hours. If this is not possible, then before stacking, you need to rewind the roll to the other side.

Stacking phase

As soon as the mastic dries, you can start laying the material. To obtain a high-quality coating, you will need 2 layers. The first can be done with the help of an eluting material without crumbs. For the second one, you need to use a ruberoid with a stone crumb. Start work from the bottom. This is very important, since the upper sheets must overflow the lower ones. Such a coating will help protect the seams from moisture ingress. The next layer should be laid, shifting it to half the sheet. In this situation, the seams of the lower layer will be in the middle of the upper layer.

The final part of the work

At the final stage, you need to use a gas burner. Using it, heat the roofing material and mastic. Do this followed by sections, each of which should not exceed 35 cm. During heating, the film must be white and burn, which is fixed on the material. This will signal that the coating is ready. Warm up the heated material to the mastic and roll it with a special roller. If there are deep pits on the surface, then it will not work out qualitatively with a roller on this place. Accordingly, afterwards the roofing covering will be spoiled by the fault of condensate formation. That is why it is important to level the surface before laying the material.

Some things to consider

On the roofs there are usually pipes, mines, chimneys. Around them, the material should be cut so that the pieces can be overlapped. If this can not be done, then it is necessary to cover this piece, using several strips of ruberoid. You need to know this if you, for example, want to answer the question of how to cover the roof of a bath with a ruberoid with your hands.

It is necessary to carefully glue the material to the edge of the surface. Otherwise, it can be torn off by the wind. In order to ensure high reliability, it is necessary to fix the ruberoid using metal or wooden slats.

Conclusion

Now you know how the roof is covered with roofing felt. It will not be difficult to do this. Correctly perform all stages of work. Only in this case the roof will become elegant, and the roofing will serve as a protection against precipitation.