"Hercules" (dry mixes): product range and characteristics

If you have heard about the trademark "Hercules", dry mixes from this manufacturer should be known to you, because they are quite common in the building materials market. They gradually displace sand and cement based compounds, with more outstanding performance characteristics. It is very convenient to breed them and work with them. Depending on the purpose, the compositions "Hercules" are facing, masonry and plaster.

Plasters and putties

Stucco mixture "Hercules" has increased strength, does not involve the use of putty, after applying you will be able to get a glossy surface. Work with such compositions can be done either manually or by machine application. The composition is well distributed, and after that it perfectly suits the alignment process. The surface after treatment will not be afraid of moisture. Before starting work, you can select the fractionality of the composition to obtain the desired layer thickness.

They have excellent qualities and putty from the company "Hercules". Dry mixtures of this kind can have a gypsum composition and do not shrink after application. Packing is very convenient (3-15 kg), which allows you to buy as much material as you need, and do not overpay for the mixture, if its small volume is required.

Masonry mixes

If you need to purchase a mix from a wide range of products, you can choose the composition with the required qualities. This can be a material, for example, with refractory or frost-resistant characteristics of the brand "Hercules". Dry mixtures of this type Demonstrate excellent styling, as well as plasticity. They can be applied on the surface of almost any material, which is due to the high level of adhesion.

Compositions for masonry are used in the installation of above-ground structures and building bases. The composition in soils with normal moisture shows up well. When using the M-100 grade, the flow rate will be 1.67 kg per 1 m ² , if the thickness of the application is equivalent to 1 mm.

Screeds and mixtures for arrangement of floors

To smooth the floor , the "Hercules" formulations are often used. Dry building mixes perfectly lie on the surface when arranging screeds. For repair work, you can choose floor levelers, self-leveling powders, screeds. Select the product of this brand is recommended for installation of systems based on cement and polymers.

The peculiarity of using the "Hercules" mixture when leveling the floor

The compositions intended for leveling the floor assume the use of certain knowledge and experience when working with them. The basis must be prepared in advance. To do this, remove any debris from the surface. Using a solvent, you need to remove the remnants of paint and oils. The floor should be washed and well dried. If there are insufficiently well-fortified elements on the surface, they must be disposed of.

One day before the start of the work, seams and joints should be sealed. Next, apply primer mixture. If it is necessary to work with a base with good absorbency, then the primer should be applied in 2-3 layers.

Before the process it is necessary to prepare:

• Lighthouses;
• level;
• a piece of chalk;
• cable;
• A bucket for mixing the solution;
• A primer;
• A drill with a nozzle;
• Platen for priming;
• Needle roller.

If you decide to use the product of the company "Hercules" when repairing, dry mixes from this manufacturer should be applied to beacons. On the rough surface, the highest point of the surface should be determined. This can be done with the help of laser level, but traditional construction will do. At the peak point, a lighthouse should be placed. It must be made from reiki. Such beacons are installed at several points along the perimeter of the room. Now you can proceed to pour mortar onto the floor surface. The layer is treated with an aeration roller, which will eliminate air bubbles. To fill the next portion of the composition, proceed after 10 minutes. After 20 hours it is permissible to further work with a fully finished screed made of Hercules. Dry mixes are created taking into account the necessity of fast congealing. If there is any finishing coating on top, then it should be started after 2-3 days.

Adhesive compounds and screeds

In the assortment of materials "Hercules" you can find adhesives for laying ceramic granite, tile and mosaic tiles. After the completion of such work, you can use the mixture to fill the seams of both facade and floor tiles. You can choose a mixture with the required color. The embroidery will have excellent characteristics, have impressive strength and elasticity. You can lay the mixture on any surface, as they have increased adhesion, protecting the seams from the effects of moisture, which is especially true when working outside buildings or in bathrooms. Fungi and mold will not appear on the surface, since antifungal ingredients are included in the composition of the grouts.

If there was a need for repairing the premises, then for the implementation of work in the field of sex, you can purchase the entire range from one manufacturer. Building mixtures "Hercules" are represented by leveling compounds, adhesives, and also trowels.