Granulators for mixed fodders. Mini-granulators for mixed fodders: prices, advice on choice

If you are the owner of a household, then the task of obtaining a balanced food must necessarily arise. For this, granulators are used for mixed fodders.

Necessity of application

The resulting feed is able to maintain its original properties for a long time. If we consider a granulator, then it is a special device designed for manufacturing products that go to animal feed. Thanks to the technologies used, the feed retains its original qualities, without losing any useful substances. If you decide to purchase a mini-granulator, you should worry about whether the product has a certificate, because only in this case you can count on good quality of the product, which will comply with the state standard.

Design features

As the main component of the described device is a matrix. The length and size of the products, which are displayed at the finish, can be changed depending on the needs of animals or birds. Prepared in advance, the mixture passes through a matrix heated to a certain temperature, after which the granules of the required size can be obtained at the finish by the cut-off method.

Recommendations for choosing a granulator depending on the needs of animals or birds

Granulators for mixed fodders can have a different matrix, which allows you to obtain certain sizes of elements at the output. Before choosing a particular model, you need to determine the need for agriculture, which is in your possession. Thus, for adult birds will be needed mixed fodder, the size of which does not exceed 0.5 centimeters. If we are talking about young pigs, then this figure increases to 0.8 centimeters. For medium and large cattle, the size of granules can vary from 1 to 1.5 centimeters. After acquiring a granulator, you do not need special knowledge to process the raw material into the finished feed. Raw materials will need to be poured into a special tank, from which it will be directed to the matrix by rotating rollers. The latter heats up in the process of equipment operation up to 110 degrees. By the method of sufficiently tight pressing the raw material to the matrix, the mixture passes through special holes, and at the outlet it is cut into small granules. This is possible with the help of special tools. After the food is ready, you can pack the products and pack it in a container. As the main device for pelletizing the feed is a press regulator, which gives the original mixture the final appearance. As for the matrix, it is designed to give the mixture the correct diameter and shape.

Recommendations of a specialist in choosing a granulator

If you are interested in granulators for mixed fodders, then you should follow the recommendation, which implies the availability of roller models in certain models. They provide for the probability of preparing various types of mixed fodder. The diameter of the latter can vary between 0.4 and 1.5 centimeters. Similar variants of granulators have the ability to automatically adjust the required length of the final product. The described models are more expensive, but they allow to solve problems of preparation of feed for animals and birds of different sizes and ages. This eliminates the need to purchase several types of equipment. With the help of these devices, raw materials can initially be crushed to the desired size, and then given a stable shape. In this case, you will need to add liquid or special adhesives. Some models do not provide for the functionality of grinding raw materials, if you want to shorten the time of preparation of the final product, then you need to choose models that provide this capability.

Pellet selection according to technical characteristics

Granulators for mixed fodders are now on sale in a wide range. However, before you purchase, you should pay special attention to certain quality characteristics. If economy is important to you, it is important to take into account that different models are characterized by different levels of energy consumption. In order for the product to last for a longer time, it is necessary to choose options that are made of alloy steel, not only the body, but also rollers, as well as the matrix. If the product is accompanied by a quality certificate, then with it you can get acquainted with the information on the technology that was used in the manufacture of the product. Thus, the rollers and the die must be heat treated under the conditions of a special furnace.

This allows you to get a granulator, the life of which will be longer. You can do the granulator yourself with a meat grinder, but such equipment will not be characterized by efficiency and high efficiency. In the factory models, an engine is installed, the power of which can vary from 2.2 to 3 kilowatts.

Choosing between new and old models

If you need a press granulator for mixed fodders, it is important to pay attention to what elements are used in the design. Thus, the old models used straight-toothed castors. Their use in the transport of mixed fodders was extremely inefficient. Today such variants of granulators are much cheaper, however experts recommend to refuse their purchase, paying attention to new models. In the latter case, a helical gear is used . With the operation of such equipment, you will notice a less impressive noise level and a long service life of the product itself.

Selection of a granulator with a smooth start and the presence of a thermal relay

Of course, the granulator can be made by each domestic master from the meat grinder. To do this, you need to use an old home appliance, which is supplemented by a bucket and a more impressive size chamber for receiving raw materials. However, with the help of such equipment it will be difficult enough to process a large batch of mass, which will form the basis of future fodder. Modern granulator mixed fodders, the price of which can vary within 7000 rubles, can be purchased for solving household tasks. Ensure that the design has a centrifugal clutch. Due to the fact that the latest technologies are used in the process of manufacturing similar products, you have the opportunity to use equipment that has the function of smooth starting of the engine. Ask the seller if the product has an arbitrary slippage of the coupling, with the help of this functional it will be possible to reduce the high load, which will prolong the life of the granulator.

Among other things, with the help of these additions, it will be possible to increase the efficiency factor of both the engine itself and the mechanism of the product. If you want to exclude possible loads on the engine, you should purchase a screw granulator, which has a thermal relay. If the temperature of the motor increases to the maximum possible mark, then this functionality will work, which turns off the engine.

When to choose a household mini-granulator

If you do not know, to prefer professional equipment or granulator home, it is worth considering the advantages of the latter. Among them, mobility in movement, simple operation and installation, insignificant energy consumption of electricity consumption, as well as low weight can be distinguished. If you are faced with the task of solving more complex issues of agriculture, then, of course, it is best to choose an industrial model. It will allow processing more raw materials, which will form the basis of feed.

Conclusion

If it is necessary to solve a wide range of problems, it is best to purchase an extruder-granulator. Perhaps, such equipment will cost a little more. Before going to the store, you should decide how often you will use this device. If the equipment is used quite rarely, then experts do not recommend spending money on purchasing expensive models.