Rysmus: what is it, purpose and features

In working with wood, only a few tools can provide a qualitative cut. Even jigs with a high frequency of engine operation leave small flaws on the surface of the workpiece. In some cases, such defects can be reconciled, but if the material is planned to be used in a delicate finish with a paint finish, then you can not do without additional processing, which will help make the thicknesser. What it is? This is a machine that performs the function of grinding, - in some ways it is similar to a group of joists.

Appointment

The function of this machine may seem superfluous. The fact is that it is quite possible to prepare several boards for installation with an ordinary hand tool in the form of the same jig or planer. But if it is a question of large volumes, the machine house thicknesser will have appreciable advantages before the small-format tool. And it's not just the speed of operations, but the maintenance of high-quality machining with an optimally clean cut surface.

In addition, this is just the case when it is safer to work with electrical equipment than with a hand tool. As practice shows, the probability of getting a trauma on such a machine is much lower than in working with planers. Nevertheless, it is not always necessary to purchase such a thicknesser in everyday life. What is this in professional production is another matter. For example, on a woodworking line or in a furniture factory, the availability of such equipment is simply a prerequisite for technical support.

Kinds of tools

Two criteria can be distinguished, according to which the models in the group of thicknessers are classified. This division is based on the purpose (household and professional units), as well as the configuration of the cutting complex. As for the first classification, household models are less common, they have a small power reserve and a design focused on servicing typical billets. Professional units have high power capabilities, a wide range of settings and rich functionality. However, the proverbial household wins at a small cost.

In terms of the implementation of the cutting segments, it can be noted that mainly in the thicknesses two elements are used. But there are modifications, which are called fugano-thicknessers. Such versions can have more knives and are suitable for working with rough surfaces.

Main characteristics

Among the main operating parameters, you can identify the depth and width of the cut, the power and speed of torsion of the shaft. As for the depth, it varies from 1 to 3 mm. This is an extensive range, within which the user can and put in order a rough board, and finalize the ready-to-paint panel of solid wood leaf.

The width of the workpieces with which you can work on the machine, in some models reaches 330 mm. Power capacity determines how productive the machine will be. The fact is that the thicknesser woodcutter can perceive soft and hard rocks in different ways. That is, in the second case, processing may not be as effective or time-consuming. The higher the power, the more pliable will be such species of wood as oak, beech, elm, ash, etc. To work with such sawn timber, a power of at least 1500 W is recommended. Here it is worth noting the quality of the cut, which will depend on the speed of the shaft. The optimum parameter for this parameter is 8-10 thousand rpm.

Unit Features

In addition to high precision, such machines provide the ability to control typical cutting parameters. That is, the operator can, for example, process a single workpiece, set the equipment a template example, which will be followed by subsequent serial cutting. This option is not available for every woodworking machine. Reismus (household unit or professional) allows the structural orientation of the material under the template cutting, which provides the parameters of depth and width.

Manufacturers

The segment is rather narrow, so there are not so many manufacturers in it. For example, one of the popular models is offered by the Swiss company Jet. This is a machine JPT-310, to the merits of which can be attributed high performance and reliability. Interesting offers are being realized by the Polish company Proma, in the family of which it is possible to find not only a high-quality, but also affordable, thicknesser. Reviews of this product also indicate ergonomic components - convenience in management and settings. A universal model is offered by Brassa in the modification of FS-32N. This machine is suitable for home use, and for furniture factories.

What to consider when choosing?

It is clear that the buyer's main attention should be paid to the evaluation of paramount technical parameters, including capacity, design capabilities, cut quality, etc. Familiarization with these indicators will help to find out whether a particular model is in principle suitable for working with a specific material. But this is not enough to fully understand how suitable a particular thicknesser. What is this in terms of operation? Not only a working tool, but also quite a dimensional machine, which will require a lot of space for work. Accordingly, it is important to evaluate the size of the equipment, since it will require a separate storage room.

Also it is necessary to take into account some functional additions, which will allow to work in non-ideal conditions. For example, you should take into account the presence of fuses, lights and protective devices.

Conclusion

Even before buying a machine, it will not be superfluous to calculate how much such an aggregate will be in demand on the farm. So, if in the specialized production the presence of equipment will be fully justified, then in the home this need is not obvious. Another thing is that there is a wide range of models in which the thicknesser is represented. What is this in the general classification of woodworking machines? This is a specialized technique, which, depending on the modification, can have very different characteristics. Accordingly, prices vary. For example, a professional model can cost 150 thousand rubles, and a household machine - about 20-30 thousand rubles.

As can be seen, the difference is huge between individual segments of the thickness of the machine. Therefore, if financial opportunities allow and there is a need for obtaining high-quality processed wood materials, then you should not deny yourself such a purchase.