How to choose the right glue for ceramic tiles

In order for the ceramic tile to last a long time and stay firmly on the surface, you need to pay attention to two important factors: firstly, the quality of the tile itself, and secondly, the glue for the ceramic tile to be used for laying.

Choosing glue for ceramic tiles and porcelain stoneware, It is necessary to consider what humidity will be in the room, and on what basis the material will be laid. Also, when choosing an adhesive solution, you should take into account the price, availability and ease of use.

The modern market presents various adhesives for ceramic tiles, which are suitable for different facing materials. Naturally, when using universal glue mixtures, the tile is easily glued to the base, but the question arises as to how durable and durable this laying will be.

If the laying of ceramic tiles occurs with a new construction, then it is possible to select the glue that will be ideally suited to the selected material and to the substrate. When installing tiles on the existing base of the floor or walls, carefully prepare the surface, and then choose

A smooth foundation is this guarantee that the ceramic tile will be firmly and securely adhered. At the same time, a flat surface will save the consumption of the adhesive mixture. Since most manufacturers specify that the glue for ceramic tiles should not be laid with a layer of more than 5 mm, it is necessary to check the surface drops first and, if necessary, to straighten out any irregularities.

When choosing glue For ceramic tiles, it should be borne in mind that the lined surface will be so strongly exposed to moisture. If the styling is done in the bathroom, the waterproofing of the room is simply necessary. Otherwise, over time, water will penetrate through the microcracks in the joints of the seams, which will entail the destruction of the glue.

The format of ceramic tiles is also of great importance when choosing a glue mix. Inexpensive adhesives can be suitable only for small format tiles, the size is not more than 30 × 30 cm. For a large lining material to be laid in rooms with high humidity, special glue should be selected.

Particular attention should be paid to laying the mosaic. This is not a small format tile. On the adhesive mixture for it, it must be indicated that this type is used for gluing ceramic and glass mosaic. For such purposes, a special acrylic or cement fine-glue glue is best.

When facing ceramic tiles "warm floor" should also be selected special glue. Since such a floor has constant temperature changes, cheap glue can break down after a while. It is better to use a special improved glue.

If the basis for laying ceramic tiles is a cement screed, then it is best to choose a polymer cement adhesive based on latex. When the packing surface is a chipboard or plywood, then an adhesive solution with a high coefficient of elasticity is used. For example, polyurethane or epoxy adhesive.