Reinforcing mesh for floor screed. Laying reinforcing mesh for screed

Building materials never lose their relevance and are always in demand. For example, a reinforcing mesh for a screed has a large number of advantages and provides the strength of a concrete structure. Moreover, it can be used for processing walls, ceilings, floors, and other structures.

When do I need to apply the submitted material?

There are only a few cases when a reinforcing mesh for screeds is really needed. The first is when it is necessary to ensure the maximum mechanical strength of the structure. Secondly, you have a need to unite in one that is impossible to fix in another way. For example, you need to plaster the metal surface.

There are several areas of repair in which the application of the submitted material is mandatory:

1. Strengthen the floor screed. Thanks to the presented material, you have the opportunity to redistribute the load on the foundation, to make it stronger. The use of such a product will make it possible to significantly extend the life of the screed, and, therefore, of the floor.

2. Plastering of walls or other surfaces. Thanks to this material you will ensure a good adhesion of the mixture with the surface to be treated. Especially since you can be sure that the layer of plaster after drying does not crack.

3. Facing works.

4. Plastering of foam.

In these cases, the reinforcing net for the screed allows not only to make the structure more durable, but also prevents premature cracking of the solution.

Product Advantages

Now let's consider what advantages this material has:

- High mechanical strength.

- Good technical characteristics.

- Resistant to fire. This quality makes it possible to make the refractory construction to be processed.

- Affordable cost.

- Availability. You can buy such a product in almost any construction shop.

- Versatility. Used to handle any surface, regardless of what material it is made of.

- Reduction of construction time.

Disadvantages of the material

In principle, the reinforcing net for the screed does not have any significant drawbacks. Naturally, before use, the roll material should be unwound and aligned. However, it is not difficult, and it is produced very quickly.

However, modern science does not stand still. There are already new materials on the market that have a lot of advantages, and are able to perform a large number of functions. Mesh for reinforcing the screed - this is the easiest way to strengthen the floor.

Varieties of the product

Naturally, there are different types of material presented. For example, a reinforcing mesh for a screed can be made of metal or fiberglass. The second species is very durable, it is difficult to break, and similar material is resistant to negative environmental influences. Such a product is very simple to use.

Metal reinforcing mesh for screed can be used as reinforcement of concrete mix, and for plaster. It can be made of wire of different thicknesses. The dimensions of the cells may also be different.

In addition, the product can be classified according to the scope of application: for flooring, for screeding, for walls, for ceiling. Naturally, before you buy the material, determine the size of the cell you need. For example, if it is small, it is best to use such a substrate to strengthen the plaster.

Features of the use of metallic material

Such reinforcing mesh for floor screeding has high strength. It makes it possible to use it where the load on concrete is very high. It can be roll or sectional. It can also be used for plastering as well as for floor installation. Most often, a wall grid is used to decorate walls or ceilings. Separate elements are better to apply for a horizontal surface.

Naturally, reinforcing mesh for floor screed is fixed differently. It all depends on what kind of surface you will handle. For example, it has to be welded to the metal using a reference tool. If the surface is wooden, then you can use a stapler or nails for fixing.

If the reinforcing mesh for the screed is very rough, then it should be fixed using screws or bolts. If the surface is brick, then use dowels with washers for fixing. To smooth the material, you can use bars or small stones. Naturally, the presented product must be inside the concrete layer. To do this, you will need to apply a substrate of metal racks that will hold the material "in the air".

Features of using a plastic product

This material is also used very widely. For example, you can handle internal and external surfaces with this product. The main advantage of this material is that it can be put on its own, even if you do not have the relevant experience.

The reinforcing plastic mesh for the screed is laid on the starting layer of the mixture. Most often this material is used for plastering walls or ceilings. As you can see, special supports in this case are not required. The grid is characterized by high strength and ease of use. In addition, the material presented is resistant to environmental influences and chemically inert.

Please note that this material is used more to prevent cracking of the screed. Due to its properties, it is not able to significantly strengthen the concrete. Sometimes you have to use additional fasteners, for example, dowels.

What tools are needed to work?

Laying reinforcing mesh for screed - this is not a very complicated process. However, the installation technology must be observed. Otherwise, the floor may not be very high quality. Naturally, before starting work, you must collect all the necessary tools. You will need:

1. Fastening materials: nails, screws, self-tapping screws.

2. Screwdriver.

3. Beacons, by which the whole mixture will be leveled together with the grid.

4. Building level.

5. Substrates from the profile.

You do not need to talk about the need for cement mortar or a special mixture for pouring.

Peculiarities of stacking

The weight of the reinforcing net for the screed is quite small. This makes it possible to apply it for the construction of any kind of buildings. However, it is necessary to lay this material according to a certain technology. It consists of several stages:

1. Initially, you need to remove the old floor. This may require scrap (if the coating is wooden). If a concrete layer has already been used, it is necessary to check its quality. Perhaps it will not be necessary to break it. If there are elements that peel off, they should be eliminated.

2. Then the surface is thoroughly cleaned from debris, dust, remnants of the solution and other dirt. The floor must be dry. Naturally, the base should be well measured so that you can set the beacons and align it.

3. Before filling, the grid should be fixed to the surface. She should lie flat. To do this, use special metal supports. The matter is that the material should not be laid directly on the layer of thermal insulation. That is, the grid must be in a somewhat suspended state.

4. Now you can start pouring the base with a concrete mix. It should be quality, not contain large grains of sand or stones.

5. After the screed has dried for a month, you can additionally trim it with a self-leveling compound. At this work on the manufacture of screed will be completed.

Helpful Tips

Please note that under the net, the solution must be well distributed. Also note that the material is not contaminated with paint or oily substances. Otherwise, its adhesion to the solution will be very poor. And this will significantly worsen the quality of work.

During operation, try to completely drown the grid in the mixture. Otherwise, it will quickly start to rot or rust.

If the base is crooked, then this defect can be corrected by means of a fast drying mixture, which is intended for this purpose. Concrete in the early days should often be watered to prevent cracking of its upper layer.

When choosing a grid, be guided by its quality, the size of the cell and exactly where you will use it.