We make a portal for electric fire with our own hands. How to make a portal for an electric fireplace?

The fireplace is the main element of any house. Owners of apartments for a long time could only sigh, looking at photos in glossy magazines. But now it's in the past.

Electric fireplaces

It's no secret that now the heating of apartments is due to modern heating equipment. Here the fireplaces can not stand any competition. However, the aesthetic aspect plays an almost decisive role when choosing an additional heating device.

Almost always the fireplace dominates the interior, regardless of whether it is high-grade or electric, or just a portal for candles. Accordingly, and the design should be different, thorough, fundamental.

Modern fireplaces are a means to create a cosiness in the room. They form an atmosphere of relaxation and have a leisurely family conversation. Today the consumer has a huge selection of electric fireplaces. You can also choose and design for them. Moreover, it is possible to make a portal for an electric fireplace with your own hands. And it does not take much time and money. Finishing is possible in any style, suitable for interior design.

Such types of heaters are most in demand today. They consist of an electric furnace of a converter or radiating type with a power of not more than two kilowatts and a portal. For electric fireplaces there is no need for a chimney device, and they can serve as a decoration for any dwelling where there is electricity.

Production of the portal

First you need to decide on its location - in the corner or near the wall. Proceeding from this, they select the configuration and purchase materials from which the portal for the electric fireplace will be mounted by their own hands. It is acceptable to use gypsum board with guides, wood, MDF board, plywood, parquet board, even unnecessary pieces of furniture. Materials can be combined as you like - it all depends on the capabilities and imagination of the master.

The portal and the electric fireplace must match the style among themselves and fit organically into the overall design of the room. Also it is necessary to take into account the size of the room - a large design in a small living room will look ridiculous, and a small structure will be lost in large mansions.

Start work should be after the electric fireplace itself has already been purchased. Although manufacturers specify the exact dimensions of the device, there are also technological holes that need free air access. In addition, it is impossible to predict which part of the scenery will become a hindrance during operation. If everything is foreseen in advance, then the portal for electric fire can be made by oneself, without stumbling over every detail. When you decide on the size and materials, you should start working.

Corner fireplace

Heaters of this form are more suitable for urban apartments. They have a number of advantages. The corner portal for the electric fireplace is visible from anywhere in the room. It is not necessary to place all furniture taking into account the main landmark (fireplace), as in the case with the wall version. It is enough to place two armchairs near it - and a cozy zone for confidential communication and contemplation is ready.

Corner portal for electric fireplace can be made of brick, wood or plasterboard and profile.

Portal of plasterboard

This is the most popular option. First, a sketch is drawn on the wall. Before making a portal for the electric fireplace with their own hands, the drawing outlines the base and the attachment points of the frame. The base in the target zone is made of a bar or profile. To him are attached guide racks, their amount inside the frame is dictated by the shape of the heater.

The portal for the electric firewall from plasterboard should be equipped with wiring, if it is far from the outlet. At the stage of manufacturing a complex frame, the main thing is to put a heater in it in time. When using a simple parallelepipedic design, the substrate can be assembled on the floor, and then attached to the wall by screws. Hard fixation can protect the portal from possible mechanical influences.

When the base and frame are ready, they are plastered with plasterboard. The details are cut out on the paper so that they lie exactly on the frame. After assembling the structure, it is necessary to seal the joints with putty, primed, painted and pasted decorative moldings. It is desirable to strengthen the corners of the fireplace with perforated corners for plastering. If necessary, fix the heat-resistant sheets on the internal surfaces of the furnace. Before finishing the finish, the screws of the screws get shpaklyuyut.

You can finish the portal under the electric fireplace with your own hands and in other ways. There are enough options.

Budget decorative trim

Portals for electric fireplaces can simply be painted. This is the most economical way. To do this, the surface of the drywall after the putty is thoroughly ground with a fine-grained sandpaper to achieve maximum alignment. Then stain.

An economical solution is to glue the portal with self-adhesive film. It is glued to an aligned primer. The film can be imitated with wood, natural stone or tiles.

Traditional furnish of fireplaces

Facing drywall from an artificial stone looks impressive and solid. It is fixed by means of a glue mixture, preliminary having drawn a laying scheme.

Decorative plasters, for example Venetian, imitate natural stone and are sold in dry form. Finishing of this kind is best entrusted to a professional, if there is no personal experience with its application.

Cladding fireplaces and ceramic tiles of different colors and patterns, repeating natural materials - wood, stone. When gluing it on gypsum board use reinforcing mesh for plaster and primer.

In the decoration is also applied stucco from polyurethane, which is easily fixed with mounting glue, and then painted in the desired color - white, silver, bronze, etc.

Expensive cladding

The most noble decoration is considered to be the tiles under the old days. But for drywall they can be heavy. Therefore, you can use a light version - a tile in a similar style, for example, Gzhel painting or malachite with gold.

Noble and expensive looks and finish with a tapestry cloth.

Wooden fireplace portal

It is somewhat more difficult to make portals for electric fireplaces made of wood. But they will look more impressive. To enhance the effect of using wood of noble species, for example, oak or cedar.

When building a wooden portal, do not forget about the combustibility of the material and observe the distance between the heater and the elements of the structure. The wood must be covered with acrylic heat-resistant varnish in order to protect it from external factors.

To avoid deformation and drying, you need to use a joinery adhesive made by synthetic means without the addition of water. If moisture enters the wooden structure, cracks and deformation of the parts may occur. In addition, the wood should be of the same breed and well dried.

Manufacturing of portals for electric fireplaces will be easier from MDF, chipboard and plywood. The frame is made of a wooden block, the podium is plywooded with a plywood (for example, a stone for liquid nails), the countertop can be made of solid pine.

The finishing of the portal made of wood should be done elegantly and concisely, using metal and glass elements for this.

Fireplace shelf

Any home-made portal for the electric fireplace should be crowned with a mantelpiece. It houses books, figurines, candlesticks, shells, vases with flowers. You can use the shelf to showcase small collections.

In the New Year and Christmas holidays, it will serve as an additional decoration of the house. With hanging socks with gifts, balls and garlands, the portal will please both the hosts and guests.

Optional Accessories

If the fireplace is already built, even if it is not real, then the entourage should be in full. For example, the floor before the podium can be laid out with an artificial stone. Do not ignore the fireplace grate or screen, woodburner, poker and scoop.

The woodburner is designed to store firewood next to the fireplace. Since there is no need for fuel for the electric fireplace, there is no need for a large drifter. It is quite enough that there will be a portable version with a handle for several logs. But they must be real. Although, if the size of the room is allowed, you can purchase a stationary woodburner. They are forged and stamped, respectively, and differ in price.

Any fireplace will decorate the screen. The electric fireplace does not throw sparks, so refractory glass is not considered. The screen can be forged with beautiful patterns and curls in the modernist style or classic. You can use in place of such a lattice screen-screen of brocade or fabric embroidered with rhinestones for precious stones, made of metal or other material.

The usual fireplace set also includes a poker, a whisk, a peak, tongs and a scoop for ashes. They are hung on the side wall of the portal or on a special rack-servitor, which is more acceptable for a portal made of plasterboard. Such sets will emphasize the style of the interior and add a chic to its design.