Kutkin oven for the bath: design, reviews

If you are a fan of a bath, then you should definitely build it. This can be a building on the territory of a suburban area, if you live in an apartment in the city. But after that, we still have to choose a good oven, which will work properly and will not require repair before the garment period ends.

The Kutkin furnace is a universal device that is used for a bath. This unit has a closed stove and operates on the principle of controlled convection.

For reference

According to buyers, infrared radiation is optimal, it can be used for infrared sauna, Russian and Finnish baths, as well as dry air sauna. In order to receive these modes, the furnace should be properly installed. Sandwich tubes and economizers are mandatory components.

Design Features

The Kutkin furnace has a unique design that is patented by the manufacturer. Closed stove is heated by stones, but it does not overheat the room. At any time, you can open the heater to use the oven in convection mode. Inside, there is a screen that allows you to exclude the need for the construction of a brick. On the device it is possible to install the supercharged diesel or gas burners, which can also be atmospheric. All furnaces except for the "Econom-Mini" and "Econom-Midi" series are made by argon welding.

Description of the design of the "Standard" furnace

The Kutkin furnace can be installed in paired different volumes. If the models are designated by the manufacturer in the following figures: 1.0; 1.5; 2.0, this indicates that the devices can be installed in steam rooms, the volume of which is 10, 15 and 20 m ³ . These furnaces are manufactured as follows: heat-resistant steel goes to the stove, its thickness is 2 mm. In this case, the material contains chromium in an amount of 17% or more. The inner shield and casing are made of AISI 430 steel; It goes to the lid of the furnace, in the latter case the thickness reaches 1.5 mm.

The manufacturer took care of the presence of a telescopic fuel screen, as well as the fuel channel door, which has a thickness of 1.5 mm and has glass. If necessary, the furnace can be installed in place of the door. The above models can have vertical or horizontal guides under the tile. The furnace "Kutkin" can be supplemented with an overheated burner, which is installed from above.

Reviews about Kutkina stove series 3.0

If your steam room has an impressive volume ranging from 30 to 35 m ³ , then you should choose this model, which is completely made of heat-resistant steel. An exception is the box of the ash pan. The furnace has a 3 mm material base, and the lid is made of 2 mm steel.

Consumers note that it is possible to trim jadeite only ovens with horizontal guides. In the stove you can load stones with a volume of 120 kg. As for the economizer, you can put 20 kg of stones in it or a little more, everything will depend on the degree of laying. Consumers like that furnaces without finishes are cheaper, their cost is 76532 rubles. But a gas burner with a set of automation will cost 45,628 rubles.

The design of the furnace-fireplace "Kutkin"

The bath oven Kutkin is also for sale in the form of a fireplace. It is intended for paired, the volume of which varies from 20 to 30 m ³ . The basis is heat-resistant steel, except for the ash box. The furnace is made of 3-mm steel, the fuel channel is telescopic, its diameter is 400 mm.

It is noteworthy that this model has an increased fireplace mantel. It is convenient that the glass has impressive dimensions, its diameter is 460 mm. The load of stones is possible in the volume of 120 kg, as in the above-described model. If you buy a stove without finishing, then it will cost you 52870 rubles. In addition, you can purchase a fireplace fireplace, which is intended for a fireplace stove. If we are talking about increasing the model, then its cost is 16700 rubles.

Reviews of the gas furnace series "Standard"

If you need a stove for a bath, you can prefer a gas model that belongs to the "Standard" series. Consumers note that this option consists entirely of heat-resistant steel, except for fuel channels and legs. The furnace is made of 2-mm steel, and the lid is made of a 1.5-mm sheet. Consumers have to the liking that in addition to the fireplace furnace you can install a burner.

The constructions are made with vertical and horizontal guides under the tile. But if you want to accomplish the finish with jadeite, then you should prefer a furnace with horizontal guides. Some consumers, unfortunately, can not afford this equipment. However, they note that the price of 86,200 rubles. worth it. If you have additional funds, you can buy a food economizer with a heat exchanger. It will cost 8700 rubles. When it is planned to finish the stove with a coil, the appropriate finish is obtained. The manufacturer offers it for 15200 rubles.

Customer feedback on why it is worth buying a kiln of Kutkin

Each owner of a summer cottage or a country house in a certain period thinks about how to build a bath. It will become a source of pleasure, and a full picnic will turn into a real holiday. In addition, this construction will be the ideal and the only true solution in the house, to which the pipes of the central water supply and hot water are not connected. After completion of the foundation, as well as walls and roofing, you can choose the basic equipment for the steam room.

The stove for a bath, certainly, can be collected independently, but where it is better to get a factory variant which will serve much longer. This is because the quality of welding of the industrial furnace will be better, this opinion is shared by most users, which you can learn by reading the reviews. And the very design of the factory production will win in comparison with the self-made heater in questions of fire safety and technological parameters.

Bath stove "Kutkin" series "Standard" is chosen by consumers most often. It has established itself among fans and connoisseurs of the bath. The furnace does not require any improvement, it does not need to fill the foundation. Use as fuel, according to customers, it will be possible to diesel, wood or gas. You do not have to order heavy equipment, you can transport the stove to your seat on your own car. To install, as the users emphasize, you do not need to call a specialist.

Kutkin's furnace, the reviews of which are presented in the article, should be chosen only in terms of the volume of the steam room. To do this, it is important to determine the width, length and height of the steam room, after multiplying these figures. Comparing the result with the characteristics of the heaters, you will understand which model is best to prefer.

Conclusions on the choice of a certain model

Furnaces for the bath "Kutkin", whose design is reliable, are available for sale in a wide range. For example, the "Standard 1.0" series can be installed in a 10 m ³ steam room. The weight of the model does not exceed 48 kg, but the mass should be taken into account together with the stones, they can be laid in a volume of 50 kg. The heat resistance of steel reaches 1000 ° C, in the manufacturing process, the method of argon welding is used. The logs used can have a length of up to 350 mm.

The kit includes an infrared economizer, which is not only designed to save fuel, but also for better warm-up. The "Standard" series assumes that there are other models in the line, which are indicated by the figure 1.5. This design will weigh 54 kg, and the length of logs in this case can reach 420 mm. The weight of the model increases to 60 kg when it comes to the "Standard 2.0" series. The model can hold logs up to 500 mm long, the heater in this case is more spacious and will be able to hold up to 90 kg of stones.

Gas stoves for the bath today are also popular among consumers. And in the case of the Kutkin model, you can supplement the devices with burners produced by South Korea. Weight in this case is 60 kg. For an hour of work, gas will be consumed in a volume of 1.5 to 2 m ³ .

Conclusion

Whichever model from the "Standard" series you choose, each will have a guarantee of 2 years. The manufacturer emphasizes that the life of the model reaches 10 years. It is noteworthy that the best sauna stove you can choose yourself, the effectiveness of the work will depend on how correctly you have selected this or that variant of the equipment for the room volume of the steam room.