Quite often, during the operation of a personal computer, an unpleasant situation arises due to the lack of sound. And then the question arises: how to turn on the sound on the computer? There can be two solutions to this problem. The first is to try to figure it out on your own. Especially often the breakdown is insignificant, and it can be eliminated on its own without the involvement of third-party highly qualified specialists. The second option is the help of the service center. This is a more complex solution, and it is necessary to use it only if you can not manage on your own.
To solve the problem of how to turn on the sound on the computer, you must start with a check for switching. The headphone or speaker connector must be strictly connected to the green pin of the sound card. If you use either speakers or a subwoofer to output sound, you need to check the power supply. This should signal the LED on the front panel. If the LED is not lit, then the AC power connection is checked. Also it is necessary to check the switch for turning the speaker on. Sometimes it is on the front side, on other systems it is hidden from the back side. If there is no problem with switching and power supply, then in the next step the volume control is checked . It is recommended to install it in some middle position. This will eliminate the possibility that the volume is set to minimum, and greatly simplify the procedure for how to turn on the sound on the computer.
The next step is to verify the correctness and correctness of installing the drivers on the sound card. To do this, go to the context menu of the shortcut "My Computer" and select the "Properties" item. Then select the item "Device Manager". Then in the section "Sound devices" we check the correctness of installing the drivers. If everything is correct, then there are no icons nearby. In case of presence of icons (exclamation, for example) it is necessary to reinstall the driver. This is one way to solve the problem of how to turn on the sound on the computer.
Next, you need to start the sound card driver . You can do this on the taskbar by double-clicking the corresponding icon on the taskbar. The second option is via the "Start" button, "Control Panel" and the corresponding icon in it. After the startup, it is necessary to enter the test window and check the left and right speakers by alternately pressing the left mouse button. With this test, the sound card can check the output of the signal to the acoustic system and its operation.
If the manipulations performed did not bring a positive result, it makes sense to contact the service center. The problem is much deeper, and it is almost impossible to solve it on its own. In the event that you contact a specialist, he will necessarily find the cause of the inoperability of acoustics and bring to life your computer system.