How to make lizuna from water and shampoo at home?

Fans of the once sensationally colorful animated cartoon "Ghostbusters" appreciated the green ghost of a tomboy named Lizun. The substance was not just a bully, but also terribly voracious, easily changed its own state, moving from liquid to more solid. The specter so touched the audience that many manufacturers released a kind of prototype in the form of a slim toy.

The creative parents of many tombstones have come up with how to make a lizuna from water and shampoo at home, thus simplifying the process of buying new toys. Home prototypes are easily customized to the child's favorite color, the desired size and even structure.

From shampoo

How to make lizuna from water and shampoo without PVA glue at home? Now tell. But first prepare some components. It:

• 100 ml of available shampoo home;
• Polymer quality (the main fresh) glue type "Titan" - 100 ml;
• 2-4 g of dye (color can be chosen different);
• Plastic thick container (a plate or a bag with a thick bottom);
• Stirring stick.

Manufacturing

The first thing to do is to pour the prepared shampoo into the container, then the chosen dye should be covered in its center (so that the lizard enjoys its color and texture, it is better to pour at least 5-6 g per 100 ml of the base). If the toy for girls - together with the dye in the shampoo, you can make shines, small scattering of beads or shine. Further it is necessary to mix slowly to full homogeneity of the mass, scrupulous mixing will give the best result.

How to make lizuna from water and shampoo without glue PVA, know a few. But the lime on the polymer glue possesses the child's abilities. Which ones? Pleasant viscidity, peculiar stickiness and suppleness. Many children are better off playing with toys based on polymer glue. After all, PVA does not give the lizun properly stretch. In the color basis, it is necessary to pour in the prepared polymer adhesive. After that, immediately begin to interfere well. The basis must become uniform throughout the surface of the mass.

Many advise not to use glue exactly according to the prescription. After all, the density and texture of the shampoo can request more thickener. Therefore, when mixing the substrate, it is worthwhile to closely monitor the fluidity and, when doubts arise, add small amounts of glue. Store the finished toy in a closed jar or plastic container, as access to air or moisture can lead to stratification of the mass.

How else to make a lime with no PVA glue?

Most craftsmen try to avoid using it. In recent years, the quality of the glue does not just want the best, but does not even satisfy the usual function of gluing sheets. Now consider another way of making a sticky toy.

• 200 ml of a warm (colored food coloring) water;
• 200 mg of fresh starch.

This method of creating a lichen is approved by many mothers, because there are no chemical constituents in the composition, and therefore there is no negative effect on the baby's body. Due to the simplicity and availability of all components, you can not worry about the loss or drying of the toy. After all, you can create it on a daily basis.

The first step is to tint the used water. The dye can be selected as standard for the cartoon of green color, and it is possible to decide on brighter and juicy shades. Afterwards, it is worthwhile to start starch in small portions in colored water (once the whole dry part is poured out, one can not achieve homogeneity of the mass). The ready starch liqueur is elastic and pliable, but it does not differ in jumping, that's why small children are more often indulging in such toys, older teens want to throw themselves in color slim.

Another option

And how to make lizuna from water and shampoo at home? Now consider another production option. To prepare a lizun, you will need:

• A quarter of a glass of high-quality homogeneous PVA glue (do not use the overstocked or water-separated composition);
• A third of a glass of starch diluted in warm water (it should also be taken fresh);
• Dye - the usual green, food additives, gouache;
• Inexpensive transparent package for easy mixing.

Many start the process with a glue base, but it is better to mix the starch water and the dye first. How to do it? In the package it is necessary to pour the solution of starch and water and pour in the prepared dye there (you can use more sparkles or crumbs decorative). The whole mixture must be shaken several times, so that the liquid becomes homogeneous and colored (unbreakable lumps of dye can in consequence break the texture of the toy). The last in the package is to pour PVA (it can be pre-mixed to be sure of its quality). Mixing the whole composition a few times, the package should be sent to the refrigerator for 4 hours, after you can safely play with the lizunom.

Without dyes

There is also a way to make a lime from water and shampoo without dye. Such a toy is interesting in that it can be hidden anywhere, and also observe the processes occurring inside the lump itself. For the preparation of colorless composition it is necessary:

• 300 g of glue "Titan" (or other polymeric) - they can be stocked in large construction shops;
• 200 ml of a colorless but not cold shampoo (such a base may not give the necessary uniformity).

Mixing the simplest components can be done in a plastic convenient vessel, the slower the mixing, the more effective the composition will be. To play such colorless lizun is pleasant to small children, especially those who have a reaction to dyes.

Without glue "Titan"

And how to make lizuna from water and shampoo without glue "Titan"? Now tell the story. After all, often these kinds of adhesives are not at home and they need to be sent to the nearest store. To prepare a lizun without "Titan" you will need:

• ½ teaspoon borax (sodium tetraborate) ;
• 100 ml of colorless glue;
• 2 cups of warm water (40-50 ºС);
• Two strong plastic containers (it is better to take them with measured values);
• dye.

After rinsing the containers, you can start the process of creating a lizard. The first thing is to put a glass of water in one and cook a borax into it. To make the mixture as homogeneous as possible, it must be mixed. In the second container it is necessary to mix 100-120 ml of lukewarm water and 30-40 g of transparent glue, the dye should be poured in small parts, watching the color saturation.

Next is to connect the fluids - it is best to do this by pouring water with borax into the second mixture, so the mixing process will be more efficient. That's all, a toy for a child is ready.

From soda

Now you know how to make lizuna from water and shampoo. But you can make a similar toy from soda. How exactly? We will now tell. For preparation it is required:

• 50 ml of detergent-safe product;
• A teaspoon of ordinary soda;
• Half a cup of warm water;
• Any natural coloring - 5-6 g.

First of all, it is better to pour detergent into the vessel - it will become a convenient basis for the future composition. Then the turn of the water and the dye itself. The composition must be mixed. And only then add soda. After carefully mixing it you need to set aside for a few hours and then start the game.

Conclusion

Now it's clear how to make a lizuna from water and shampoo and other ingredients. So, you can please the kid with toys made with their own hands.