How to log in to the laptop in safe mode? How to turn on the laptop?

Any computer equipment, unfortunately, is subject to breakdowns, and malfunctions are different. Some may be associated with the components of the laptop or computer, others - with the operating system, that is, with the software part of the gadget. In most cases, the fault is the user himself, who to some extent inaccurately handled the device. Often, the user himself can fix a problem that prevents him from continuing to use the device normally.

Do not start the laptop - what to do?

Situations are completely different. You do not have to be a programmer to understand why the laptop does not start up, but many panics and start to sound an alarm. If there is a black screen when turning on the laptop - what should I do?

The first thing you need to determine: what specifically can be the problem with the laptop and with what it can be connected? It is necessary to recall your recent actions, which were committed, perhaps, this will prompt the solution of the problem. So it will be much easier to find a solution for both the normal user and the professional if you have to contact him, because this is usually the very first question that is asked to the client.

What problems can there be?

There can be many options, but you need to check the most common and elementary ones for starters. The concept of "not running" can mean completely different things. For example, a laptop may not react at all to the power key. In such cases, the maximum that a user can do is to check the possible causes listed below.

What is the safe mode?

Before you ask yourself how to enter a laptop in a safe mode, you need to understand what it is and what it's all about. Safe mode, as many could guess, is necessary in order to have the opportunity to try to start the system even in cases of critical errors. By itself, the operating system rarely fails without a reason. Most of the problems occur through the fault of third-party software.

Often the error can be obtained due to the update of drivers that are either incorrectly installed, or the driver itself is completely non-working or incompatible with the system. It happens in the case of some anti-viruses, which because of their internal errors can hang the entire system.

A fairly frequent diagnosis in cases with a system at risk is the installation of several antivirus programs at once. Do it categorically prohibited! This will not give additional protection, but on the contrary, it will greatly harm the computer. Information about this is often indicated on the installation screen, but few people pay attention to this, and then can not understand why they do not boot up the laptop.

So, the safe mode is needed in order to start the system, without loading third-party installed programs, drivers and other utilities. In addition, through the safe mode in extreme cases, you can use all the standard Windows functions, for example, "Explorer."

How to get into safe mode using the system

This method is suitable in case the system is still running and running. Based on this method, you can understand how to go into a laptop in safe mode in a fairly simple way. You can take this option just in cases where you need to remove the second antivirus, but you can not do it in the usual way.

To do this, you need to perform a few simple steps:

• Press the special key combination Windows + R on the keyboard to launch the "Run" window, which will help launch a special utility.
• In the window enter the word msconfig and press the Enter key.
• The system configuration window opens, you need to select the "Download" tab at the top, tick the "Safe mode" checkbox and select the necessary boot parameters, preferably the minimal one or with the network, if necessary.
• Click the "Apply" button and restart the computer.

After the performed operations it will be necessary to return this parameter back, that is, to remove the tick in the same place.

How do I enter safe mode when the system boots?

But if you still need to figure out how to enter the laptop in safe mode in the event that the OS does not boot, then you need to understand that there is a certain key that launches this mode.

Usually to find this key is not difficult, because in the standard - this button F8. It should be pressed immediately after pressing the power button, the screen for selecting the type of download should appear. If it does not work, you can find the necessary information on this key in the notebook operating manual. Call it, as a rule, save mode.

Safe Mode Windows 7 on a laptop and computer

In order to enter the safe mode of Windows 7 on the laptop, you need to press the F8 key, as mentioned above. In this system, in any case, this key should work. It's important to remember that you should not press it before turning on the laptop, but vice versa, right after that and until the black mode selection screen appears.

Safe Mode in Windows 8 or 10

In order to understand how to enter safe mode on these systems, you need to find the operating instructions for the device before turning on the laptop. All this is because the systems, starting with the 8th, can not be started in safe mode, unless the manufacturer has assigned a special save mode key. You can find it in the manual. Otherwise, the system will have to be started using the bootable media, or from the operating system itself, if possible.

This is done as follows:

• You need to click on the "Start" button in the "Start" menu or in the panel on the right, then hold down the shift on the keyboard and press the reset button.
• After the reboot, click "Diagnostics".
• Then click "More Options".
• Then - "Download Options".
• Reload.
• Next, you need to select the safe mode by pressing the F4 key.

What should I do if I can not go into safe mode?

This can happen for various reasons. The most common is a black screen when the notebook is turned on. What to do in this case? Often this may be because the system behaves incorrectly, and the standard loader can not start in normal mode. If pressing the escape keys in save mode does not work, then the problem can be solved in another way.

You must obtain a bootable media or disk. This is a common image, with which you can both install the system again, and use the built-in system recovery utilities. Such a disk could be attached together with a laptop, and if not, then make a bootable medium is not difficult through a computer of friends, neighbors or friends.