How to get right in mechanics? Tips for Beginners

Many say that the gearbox "mechanic" is more difficult to manage than the "automatic", and it is very difficult for newcomers to master it. In fact, the principle of driving a car with manual transmission can be learned in one day, and if you try hard, it takes several hours. Be sure - in a few weeks you will be driving as a professional. Today we will tell you in detail how to get right on the mechanic and switch gears to manual gearboxes.

As you know, cars with a manual transmission are equipped with three pedals. From the bottom, the left serves as a clutch, the middle acts as a brake, and the right one for a gas. We will use them when driving.

Stage number 1 - start the engine

So, let's look at how to get right on the mechanics. First you need to pay attention to the gearshift lever. On top of it there is a gearshift circuit . It should be learned in order not to be distracted further by unnecessary movements and views. The gearshift scheme is very primitive, so after a couple of days of driving you will automatically learn it by heart. But back to the topic. Before turning the ignition key, be sure to check that the gearbox knob is in neutral. To do this, pull the lever to the left and right. If it moves freely, quietly turn the ignition key. If the machine is "in gear", press the clutch pedal and pull the gearbox handle to yourself until you feel that it is moving freely.

How to get right in mechanics? Stage number 2 - "let's go!"

After starting the engine, it is necessary to squeeze the clutch again and switch the lever back to the "1" position, that is, to engage the first gear. Now the fun begins. We smoothly release the clutch pedal and, as soon as the car starts to move, we press on the gas. But not in the floor, but smoothly and neatly, while the arrow of the tachometer is in the green scale. If you strongly release the clutch, the car will first move abruptly, and then stall. If you direct the gas pedal to the floor, the car will take off in a matter of seconds, so that you will not even be able to react. Therefore, it is best to train on a special site or circuit, where there is no near the pillars and expensive "Mercedes".

Learning to ride a mechanic and switch gears

After the car has moved from a place and turns have reached red scale, we are switched to 2 transfers. To do this, release the gas pedal, squeeze the clutch and at the same time move the gear lever to the desired position. Let's release the left pedal, but not abruptly. After you feel that the clutch is almost released, at this point, gently press the gas and then release it. It is worth noting that the more powerful the car engine, the less you need to put pressure on the trigger.

And, by the way, when you start from the place, if it's a VAZ family of "classics" or GAZelle, the gas pedal must be pressed, while the car has not started moving. Only after the arrow of the tachometer has entered the green scale, release the left pedal.

At this stage, the question of how to get right on the mechanics can be considered closed.