How to enter the router? How to enter the router menu

Wireless networks have recently become very popular among users of computer systems, because it has allowed to abandon the incredible number of cables for connection, and for several terminals - also from the installation of additional routers. Standard devices for connection are considered to be routers, ADSL modems , etc. Consider how to enter the router to make the correct settings.

Virtual networks

In fact, virtual networks are communications that work by connecting through routers.

In this case, the communication between the computer terminals is done without using wires via a radio signal (for example, a router and a Wi-Fi module on a computer or laptop).

Router: general concepts

Before solving the problem, how to enter the router, you need to figure out what kind of device it is. The principle of operation for all models of routers, regardless of the manufacturer, is the same, only a few settings can differ.

Roughly speaking, a router is a means of distributing IP addresses to connected devices, as well as sending and receiving signals to provide network access or the ability to work on the Internet (an integrated DHCP server is responsible for this). By the way, the answers to questions about how to enter the ASUS router or in the menu of the model of any other manufacturer do not have any cardinal differences. But some moments when setting up the network or the most connected device, you still have to take into account.

Installing drivers

Another important point before solving the problem, how to enter the router's menu, is the installation of drivers. Probably, you do not need to explain that without a corresponding driver the router will simply not work, because the system will give a message that an unknown device is connected to the computer . Actually, the installation of drivers, as a rule, does not cause complications. To do this, you use the original disc supplied with the device when you purchase it. In most cases, just run the Setup.exe installation file and follow the instructions of the "Hardware Installation Wizard".

But, as a rule, there is a special autorun feature on disks, when the main setup menu appears automatically (of course, if the automatic recognition parameter is set in the system). Windows can also install the most suitable driver on its own, but as practice shows, it's best to still use the original installation disk, since then the router will work intermittently or will not work at all.

Direct connection of the router to the computer

Now we will proceed to the direct connection of the router to the PC or laptop. In order, for example, to enter the TP-Link router (or to any other device), before setting up the virtual private network connection and the router itself, the latter must be connected to the terminal directly using a special network cable. The connection is made to the connector of the network card installed in the system.

Note: this is a prerequisite for calling the router menu. However, before this, it will be desirable to create a network connection and basic settings related to the TCP / IP protocol.

Connection settings

But in the preparatory activities, and that's not all. Before you look for an answer to the question of how to enter the router, you need to make minimum settings for the network protocols used to connect. In the standard version, this is done in the "Network and Sharing Center" menu. In the adapter settings settings settings, select the "Properties" tab and go to the main TCP / IP protocols (IPv4 or IPv6).

In most cases, you need to use the settings to automatically obtain the IP address and DNS server address. Sometimes it will be necessary to register the parameters manually. As a rule, even for different terminals they are standard and are provided by the provider when connecting the home network.

How to enter the settings of the router

Now we have come close to the main issue. Consider how to enter the router, when it is already connected to a computer terminal or laptop, installation of drivers and preliminary settings of the network card have been made.

To enter the menu, you must start the Internet browser installed on the system. Many experts recommend Internet Explorer, but in principle it does not matter. In the address field, enter the combination of the IP address 192.168.1.1. In addition, if some specific models are installed, the address may change. For example, you can enter the D-Link or Tenda router only by using 192.168.0.1 in the address bar .

Knowingly you need to pay attention to the label that is glued on the back of the router. To access the main menu, it specifies the IP address, login and password. In most cases, this is the admin login and an empty password (sometimes 1234). After passing the authorization and you can get to the main window of the main settings.

Special Advanced Configuration Parameters

Until we go into the details of the settings of the router itself. In principle, everything is automated there. It is better to consider some additional settings that will need to be made if there are problems with the connection. Sometimes in the address fields of the external TCP and UDF ports, you need to manually set the values of 35000 and 35001.

Troubleshoot problems

As for the solution of the question of how to enter the router, the basic settings alone do not stop there. The fact is that sometimes serious problems can arise. When communication is not possible to establish, there can be quite a lot of reasons for this. For example, a firewall or antivirus software may be blocking access to the network. For the firewall, use the manual port redirection mode.

Sometimes you may need to enter the IP address, DNS server, subnet mask, WINS server, etc. in the manual mode. As already mentioned above, such data is provided by the provider. And this concerns not the settings of the router, but TCP / IP protocols in the Windows OS itself.

In addition, the problem may lie in the incorrect creation of a home network. You may need to delete an existing connection and create a new one. However, after that all the above procedures will have to be done anew.

In some cases, it will be necessary to check if the configuration in the router menu is correctly configured. Sometimes you may need to reinstall the device driver. In any case, the problem can be eliminated.

The result

As can be seen from the above, in this case we have considered only the main issue connected with connecting the router to the computer system and entering the main settings menu without going into technical details.

As for the settings, they can, of course, be performed by yourself, but if the user, as they say, is far from that, it is better to entrust such a process to a specialist. Moreover, usually the settings menu is not Russified, so you will need even a minimum knowledge of English. Incidentally, it is worth noting that in the settings there are some specific parameters that can not be modified, disabled, or used by an uninitiated user. The rest should not be a problem. At least any user, performing simple actions, can simply enter the router or make basic settings for connecting to the network or the Internet.