How to disassemble a washing machine? Washing machine circuit

This article will describe how to disassemble a washing machine from different manufacturers. You will need the ability to use various tools.

Undoubtedly, many models of units have inherent only technological features. Some of them use certain fastening elements. Sometimes the appearance of the parts differs, but in general the scheme of the washing machine looks standard.

Required Tools

Many people ask how to disassemble a washing machine. To disassemble the device you will need certain tools. Most of them are read by each owner.

You will need:

• Figured and slotted screwdrivers ;
• Spanners of different sizes;
• a hammer;
• Simple pliers;
• Pliers with a bent shape;
• Mites;
• Nippers;
• Round pliers.

All tools must be insulated. Do not forget to disconnect the unit from water and electricity. To further assembly of the machine did not bring difficulties, it is advisable to take pictures of particularly difficult places of fasteners and removable parts. It's also good if you have a washing machine circuit in front of you.

How to disassemble Ariston?

How to disassemble the washing machine "Ariston"? First, remove the panel at the top. For this purpose, 2-3 self-tapping screws (depending on the design of the device) are unscrewed.

After this, push the panel towards the rear and remove it. Before you open up space for further action. Such details as the engine, electromagnetic valves, heating elements, counterweights and other important components are becoming prominent.

Then loosen the two bolts that lock the hatch. All the latches are removed, after which the front panel can be removed.

After this, you can remove the hose that fits the tank. In this case, pliers are used. They remove the fixing clamp. Further, the hose connected to the pressure switch is removed. For this purpose, the clamp is also removed.

It is necessary to remove the clamp located inside. It serves to fix the rubber cuff on the tank of the unit. The cuff itself is also removed. Further, the back panel, which is fastened to the screws, is removed.

Then you need to dismantle the counterweights. They can be both front and back. Their fastening is provided by two long bolts, which should be unscrewed and removed parts.

Next, remove the heater for heating. In the washing machines of the firm "Ariston" it is located in the rear part under the tank. For this purpose, the locking nut is loosened, located in the middle. Then they press on the pin, the part with which the nut was twisted. Push it inside with light hammer blows. The heater is pierced by a screwdriver and extracted.

Then the drive belt is dismantled. It goes from the aggregate engine to the pulley. Disconnect all wires in the tank and motor. The fixing elements of the engine are removed.

The tank remains suspended from the springs. Bottoms are located shock absorbers, which need to be unscrewed, and the springs are slowly removed, and then remove the tank.

Disassembling the tank is not an easy matter. First, the bolt holding the pulley is loosened. It is extracted. The shaft is pressed into the tank. Then the tank is divided into two halves. For this purpose, remove the clamp.

How to disassemble the LG machine?

How to disassemble a washing machine LG? First, the display board is removed. It is attached to both sides by means of latches.

The module is then extracted. It is necessary to disconnect all connectors and wires. Dismantling of the pulley is carried out by unscrewing the bolt located in the center (the machine is equipped with the usual right-hand thread). When removing the belt, pay attention to the arrangement of the letters on the inscription, so that during installation there is nothing to confuse.

How to remove the loading hatch LG

The loading door is removed from the front. It is fixed by means of two screws. Then the clip of fastening of a corrugation from rubber is dismantled. Electric valves that supply water are screwed with two bolts on the rear panel.

Remove the container for washing powder

The powder container and the corresponding rubber tubes are also removed.

For convenience in repair, it is necessary to remove the upper corner on the front part, since with this part it is impossible to pull out the drum. Next, you need to detach the mount located at the bottom (there are two of them).

Lower drum mounting

Pressing on the antennae, you can achieve an easy exit of the drum from the landing. The drum after dismantling is located only on the holding springs located on top. Starting at the next stage, it is advised to call for help from one more person.

Dismantling of lateral drum loads

Holding the springs, you can remove the drum from the body of the unit. Next, it is necessary to dismantle lateral and upper loads. The latter should be removed before removing the drum. So you will ease the weight of the structure.

As a result, only the enclosure remains from the washing machine. The next stage is the dismantling of the ring for the stopper, which holds the corrugation.

Disassembly of the machine firm "Electrolux"

How to disassemble the washing machine Electrolux? If there is a one-time tank in the construction of the machine after repairing the machine, it is advisable to replace it with a new one. The need for such manipulation arises in the event that you need to separate the cross from the drum. The cross must be changed in case of wear of the bushing of bronze.

How to unscrew the pulley bolt?

How do I disassemble the drum of a washing machine? The drum should be dismantled not only if any foreign object got into it, but also when changing the bearings.

Washing machine "Electrolux" is represented by many models. At the units of this company the tanks can have an excellent configuration, but the disassembly rules for all machines are approximately the same.

The pulley is first extracted. It is attached to the drum shaft by means of a special bolt or nut in the middle. The item is untwisted with a wrench counter-clockwise. It is advisable to put an object from below, for example, a wooden beam. So you avoid scrolling.

Removing the bolt may seem easy, but it's far from it. The pulley is secured by means of a special composition, which is poured inward. It does not allow the details to untwist when the machine vibrates.

How to disassemble a washing machine, if the bolt does not lend itself from the first time? It may be advisable to use a gas burner to heat the metal. So the bolt will succumb to you more easily. Before using the burner, read the safety instructions, as working with this device is far from safe.

Disassembling the tank

How to disassemble the washing machine after the bolt from the pulley has been removed. You must proceed to remove the pulley from the drum. To do this, you should try to swing the tank machine from side to side, pulling it parallel to itself. It also requires a bar of wood. Beating should be done until the shaft is equal to the bearing, or the drum does not rest against the front panel of the tank.

Buck unwind slowly in a circle. In some models, instead of bolts, special brackets or latches are used. They are taken out on the same principle. After they are removed, it is necessary to separate the two halves of the tank.

If the tank does not hold anything, it is removed from the hull.

How do I care for a washing machine?

Specialists give a number of tips that will help to carry out the proper maintenance of the unit. So your "assistant" will last longer.

• The outer and inner surfaces of the machines should be periodically wiped. So you remove the device from water spots. To clean the outer panel, you can resort to using liquid cleaners. The drum is wiped from the inside with a damp cloth.
• After each wash, the door of the hatch should be held open for a while. So the remaining water inside can be weathered.
• Rinse the air conditioner container without using any cleaning agents.
• If the machine began to erase worse, and it had an unpleasant smell, then you will need thorough cleaning. For this purpose, a special tool is used, which can be done at home. It should be mixed 1 tbsp. A spoonful of powder with a quarter of a glass of bleach for the laundry. The resulting mixture is poured into the machine, and the pre-soaking program is started. Then the machine is put into rinsing mode. After the end of the process, pay attention to the fact that the entire solution has been completely removed from the drum.
• If you use the top panel of the typewriter as a table, then it is advised to lay it with an oilcloth so that it does not get dirty and scratched. Do not place knives or other sharp objects on it. Avoid contact with corrosive agents.
• The drain hoses must be changed every five years and checked regularly for their condition. They should not have cracks or signs of wear.

Observing a number of simple rules, you can keep the unit in working condition for a long time.