Garden Chopper: How to Make Your Own Hands

A garden chopper is an indispensable tool for a horticulturist and gardener. This device is a metal sheet, neatly attached to a pole of wood at an angle of 70-90 °. The edges of the instrument are very sharp and can have different shapes. When working in the garden and in the garden you need different garden tools. Choppers can be arched, trapezoidal and even triangular. The most important thing is that the tool is convenient in the process of using it, it is easy, but it is strong enough.

If desired, this device can be made independently. It is not necessary for this to buy special materials and tools in the store. The garden chopper can be made from other tools that have become unusable, for example from a shovel, hacksaw or a regular metal sheet. The process takes a minimum of time. But at the same time a reliable tool is obtained, which does not cause any special difficulties in the process of operation.

Chopper garden with his hands from a shovel: easy and simple

The garden chopper can be made from an old shovel, which no one already uses, and it's a pity to throw it out. To do this, you will need:

1. The paper is emery.
2. A metal pipe, the diameter of which is three centimeters, and the length is 25 centimeters.
3. Handle of wood. It is desirable to use a workpiece made of pine, ash or oak.
4. Shovel.
5. Drill.
6. Bulgarian.
7. Clamp, bolt or nails.
8. Rivets.

Manufacturing process

So, how is the chopper made? Most often, broken shovels are used for making. For the tool to be comfortable, the material needs to be prepared. For this it is necessary to cut off all the excess from the blade of the former shovel. Do it best Bulgarian. Remove the top mounts, as well as 1/3 of the top edge. All sections are well sharpened. In addition, the part should be treated with sandpaper.

To make the garden chopper convenient, you need to attach it to the handle. This requires a fastening system. To do this, take a metal pipe and flatten one of its end. After this, the deformed side must be bent at an angle of 90 °. In this case, you must observe certain proportions. The distance from the flattened edge and to the point of folding should be at least 6 centimeters. On a flat area, two holes must be made. They can be made with a drill and drill. Exactly the same holes must be made in the upper part of the metal sheet, which used to be a shovel. Connect the material and the holder with rivets or bolts.

The final stage

The garden chopper is almost ready. It remains to fix it on the handle. To attach the cuttings, a small hole must be made in the second part of the deformed pipe. After that, the wooden pole must be sharpened. The handle thus prepared is simply driven into the tube, and then fixed with a nail. In this case, it is necessary to use hardware, the diameter of which is wider than that of the hole.

Lawn hammers

To produce the tool you will need:

1. Emery.
2. Bulgarian.
3. Hacksaw.
4. The pipe is made of metal.
5. Handle in wood.
6. Corner metal.
7. Rivets.
8. Bolts.
9. Drill.

How to make

Virtually everyone in the farm has spoiled saws. In many cases, the metal remains sufficiently elastic and strong. It is these qualities must have a garden tool. For the manufacture of hoes, you can use the widest part of the cloth width of 25 centimeters and a height of not less than 8.

First you should prepare the metal. To do this, from the blade of the former hacksaw, you need to cut out the workpiece of the required dimensions. The edges of the product should be treated with sandpaper. After that, in the workpiece, you need to make up to 4 holes. In this case, it is worth to retreat from the edge by one centimeter. The distance between the holes should be the same. The same thing needs to be done on one side of the corner.

To make the garden chopper perform its functions well, you need to think through all the fasteners. A metal pipe can be used to connect the workpiece from the saw and the wooden handle. One side of it needs to be flattened. After this, it is necessary to make several holes. The distance to them from the edge should be at least 5 centimeters. Exactly the same holes should be made in the second part of the corner.

We collect the hoe

When all the details are prepared, you can proceed to collect the structure. The tube with the deformed side must be connected to the corner to which the old saw blade or saw blade is attached. Fix the parts with rivets or bolts.

In the pipe from the second side, it is also necessary to make a hole. It is needed to fix the wooden handle. After that, the stalk must be driven into the pipe. In the prepared hole you need to drive a nail. Chopper garden, the photo of which is presented above, is ready for work.

The saw teeth need not be sawed off. They can be stored at the top of the blade of the finished tool. This will allow using it for loosening of the upper layers of the soil. If necessary, the corner can be fixed slightly lower. In this case, the teeth will protrude a few more centimeters.

Finally

A garden chopper is not just a convenient tool. It is universal. After all, with her help, you can weed not only flower beds, but also ordinary beds where vegetables grow. The main thing at work is not to damage the stems and roots of the grown plants. In this case, the radius of coverage of actions is determined by the length of the cut. The longer the handle, the less you have to move.

If you want, you can make a garden hoe yourself. This requires a little tools and materials. As a basis, you can use a sheet of metal, an old saw, a hacksaw and even a shovel.