Flizeline wallpaper: pluses and minuses. Flizeline wallpaper hot stamping

Housing arrangement is a very tedious process, since such employment requires not only serious financial investments, but also patience. Make your home cozy in a variety of ways, and one of them - to paste on its walls non-woven wallpaper. Pros and cons of this finishing material will be described below, but first you should tell in more detail what these decorative elements represent and what characteristics they possess.

Features of wallpaper on non-woven base

Sometimes it is difficult for an inexperienced master to distinguish this finishing material from others, but he has his own specific properties. The principle of creating these wallpapers is as follows: spraying the vinyl layer is not immediately directly on paper, but on a special basis - non-woven. This material is made of fibers that are specially pressed. It should be noted that the standard width of its bands is 1 m 6 cm, which is almost 2 times higher than the standard figure.

Most often non-woven wallpaper, the advantages of which significantly cover their negative sides, are delivered to the market unpainted, which allows the implementation of any design solutions. In addition, hand painting greatly enhances their aesthetic properties and gives the living space even greater uniqueness.

Advantages of non-woven wallpaper

As mentioned earlier, such finishing material as non-woven wallpaper, pluses are available in a very large amount. The main advantages are the following:

1. This material perfectly passes the air, so that the walls do not appear mold caused by dampness. But here it is important to remember that when you apply vinyl to such wallpaper, this property disappears.
2. In the process of operation, their shape does not change, they do not deform after drying or during the entire service life.
3. Flizeline wallpaper is a material that is environmentally friendly and safe for human health.
4. Very often, this finishing element of the interior is purchased for painting. Such processing does not affect the integrity of the wallpaper and only strengthens their structural integrity.
5. It is very easy to paste this material. Flizelin does not require pre-treatment with glue, which greatly facilitates the joining of strips.
6. With the help of these products, you can easily decorate any type of surface, be it concrete walls or partitions made of drywall, chipboard or wood.
7. If you want to change the non-woven wallpaper on a new material, it's very easy to remove them, you do not even need to pre-soak the material. They are shot quickly and without any problems.

The main disadvantages of wallpaper on non-woven base

However, not all the characteristics of this material can be called positive. If we talk about such products as non-woven wallpaper, they certainly have drawbacks. Let in a small amount, but they do exist.

So, if this is a simple non-woven, not coated with paint or vinyl, this finishing material can not be washed, otherwise there is a high probability of completely ruining the coating. In case of contamination, only vacuuming is allowed.

In addition, to buy wallpaper non-woven cheaply is very problematic, because of the high quality of the material and the relative complexity of its manufacture, the price for them, of course, is quite high.

Next, you should consider the varieties of this decorative element and the order of its gluing on the walls of the dwelling.

Types of non-woven wallpaper

In the event that this material is an independent coating for walls, there is no relief on it, only a drawing is possible.

Sometimes non-woven wallpaper, pros and cons Which have already been described above, are used only as a basis for vinyl stickers. This kind of material differs in that it does not have some useful properties. These wallpapers are still able to reinforce wall surface defects, they are just as simple in gluing, but the environmental parameters will be significantly lower. In addition, such a product will be much worse than air, which is fraught with premature material damage.

Many owners as the main element of the interior decor choose non-woven wallpaper hot stamping. This material is very beautiful, it has an unusual appearance and, not least, a long service life.

Tools for pasting rooms with non-woven wallpaper

This process requires the following list of building accessories:

1. Standard paint roller with medium or short length of pile. This tool is needed to apply glue.
2. A small brush with which you can grease the joints.
3. When gluing on walls such material as non-woven wallpaper, the disadvantages of surfaces in the form of irregularities and protruding areas must first be removed. You can get rid of them by using a roller made of rubber or plastic, which easily smoothens out any flaws.
4. The usual building level and a pencil. With their help it is necessary to apply vertical marking on the required surface.
5. Container for glue.
6. Corolla or any other tool for stirring the anchoring base.
7. Knife (allows you to cut off excess parts of the wallpaper).

Having all these tools available, you can start working.

Preparatory measures before the gluing of wallpaper on non-woven basis

The whole process must start from the window in the room. To begin with, it is required to apply a marking to the wall for the first strip, but experts strongly do not recommend holding a bright line with a marker, since this material absorbs very well any contamination - it is quite possible that the trace can not be disposed of even after staining. It is best to draw a thin dotted line in pencil.

Such finishing material as non-woven wallpaper, the disadvantages are also that the adhesive for them must be special and have the necessary degree of viscosities. It is necessary to apply the anchoring base exclusively to the surface of the wall. If you finish the glue with the finishing material itself, there is a high probability that after drying it will shrink and this will lead to the formation of small, but noticeable crevices.

Features of the process of pasting rooms with non-woven wallpaper

Professional masters do not recommend cutting finished rolls into separate strips. You can fix wallpaper on the wall immediately after applying glue on it, and with a high degree of likelihood that you will not have to adjust them. The main thing is to decide in advance where the material has the upper and lower parts.

The ceiling should be at least 5 cm above the ceiling, so that the slope is not too noticeable, and the wallpaper should be cut at the bottom of the skirting board. Each successive band should be connected with the previous strictly back to back. All surplus glue should be removed with a dampened sponge in the water.

The fastening of these decorative items on the wall can be carried out in different ways. But do not forget that when purchasing such material as non-woven wallpaper (pros and cons photos One or another sample can not be reflected) it is very important to carefully study the structure of the desired product carefully. Only in this case you can be completely confident in the quality of the product.

The principle of finishing the ceiling with non-woven wallpaper

This work is not much different from decorating the walls, moreover, it is even easier to perform it.

First, draw a line parallel to the wall on the surface of the ceiling. After that, it is required to apply glue to the desired area and, attaching a roll of wallpaper to it, slowly roll it out, helping yourself with a roller. The main difficulty is to ensure that the edge of the material passes along the intended line. Having reached the opposite wall, you just need to cut off the canvas, and then proceed to the next stretch.

When gluing on the ceiling of such material as non-woven wallpaper, pluses and minuses of such a solution, some owners notice already while living in a room decorated in this way. Perhaps, the room will become darker, but this method of decoration will create a unique in its external characteristics of housing and emphasize the individuality of its owners.

How to paint non-woven wallpaper?

First of all, you should determine the composition. So, the paint for wall-paper on flizeline basis can be the following:

- latex;

- water-emulsion;

- Acrylic, which in its characteristics of quality and durability is the most reliable.

The finishing material, which is intended for painting, is equipped with a vinyl coating on the outside, which can be either smooth or definitely foamed. The second option requires more careful processing, as the composition of all the protruding sections can lie badly. Many owners, painting non-woven wallpaper, pluses and minuses of this work are found in different moments. So, this process is quite laborious, but the correctly executed work guarantees the quality result and the safety of the coating for a very long period of time.