Steam insulation of walls as a necessary stage of construction

In our region, where there is a sharp continental climate, and temperature differences are the norm, it is necessary to erect residential structures taking into account all the norms and rules that only exist. That is why the vapor barrier of the walls of the room is an obligatory stage, which must be performed along with the plaster and priming of various surfaces. This procedure is done in order to protect the heat insulator built into the walls first of all from the excess moisture. Otherwise, the protective material will soon lose all its qualities and cease to perform its direct function, and the air in the room will cool down at the same time.

It is imperative to produce a vapor barrier of walls from the inside. This means that this material is always mounted after the heat insulator, as it normalizes the amount of moisture that comes from inside the room. After all, most often, especially in the cold season, in houses, the level of humidity and air temperature is always higher than on the street, so unwanted condensation occurs, it can harm all other protective coatings, of which the walls consist. This building material also needs to be selected and installed depending on the features of the ventilation system in the house. If ventilation shafts pass along the entire structure, which allow the walls to "breathe", then there is no need for a very expensive and dense vapor barrier. Well, if repairs are carried out in an old building, where such systems are already not functioning as new ones, then it is desirable that the vapor barrier of the walls is more sound and durable.

Of course, a large amount of condensate is always collected in rooms with high humidity. That is why the vapor barrier of the walls of the baths, swimming pools and other water complexes is the first thing in their construction. In large and high-quality protection, wooden structures are needed, as this natural material absorbs moisture very quickly and swells, which leads to early deterioration and failure. It should be noted that in such rooms, along with excellent vapor barrier, an adequate ventilation system must be installed that will ensure the distribution of air flows, both cold, coming from outside, and hot and humid, which is inside the sauna.

Based on the recommendations of the builders, the vapor barrier of the walls of any room should be located closest to their inner covering, and the insulation - outside the building. Disguise these auxiliary, but very necessary materials, you can always use finishing, paint or decorative tiles. Thus, it is possible to extend the life of any structure in an elementary way and at the same time make it beautiful and attractive. Also, to increase all the properties of the vapor barrier, a building film is often used, which is applied directly to the material. You can buy it in the kit with this building material, and mount without the help of qualified masters. Well, after such work it remains only to enjoy a quality and cozy new home and a favorable climate that reigns within it.