Crafts from children's playground tires

An important element of landscape design is a playground. There are many excellent ideas that allow you to equip a beautiful rest area for crumbs. One of them is to create an amazing platform of old tires. It is necessary to put a little imagination, and your kid will get a wonderful site for games. Consider what kind of crafts can be made from tires for a children's playground. For the sake of justice, it should be said that such material allows perfect ennobling of any zone of the territory adjoining the house.

What should I stock?

Crafts from old tires for a playground can be made even by a beginner master. To create them, you do not need a special tool or high professionalism. It is enough to connect your imagination. Significantly help to come up with and implement the crafts made of tires for the children's playground photos that show a variety of options for site development.

So, initially you should stock up on the material and pick up the tool.

For work you will need:

• Old car tires;
• Universal adhesive;
• Sharp knife;
• Jig saw, screwdriver;
• Strong scissors;
• Fastening details (self-tapping screws, screws);
• oil paints;
• Paint brushes;
• Additional material (plastic, driftwood, plywood).

To make it much easier to create hand-made articles from wheel tires, listen to the advice of professional masters:

1. It is best to use the imported tires to equip the playground. Domestic tires differ thick rubber. Such material is much more difficult to process. However, this rule does not apply to all crafts. After all, for some models it is preferable to thick rubber.
2. The best option is winter tires. These tires are much easier to turn out.
3. It is recommended to use enamel paints. They lie flat on the surface. In addition, they are resistant and do not cause, in comparison with other paints, a "poisonous" smell.

Provided all the main points, you can proceed to create amazing models.

How to make Smesharikov?

Almost all children love the famous cartoon. Therefore, they will like to create such hand-made articles from tires. Smeshariki for the children's playground will be a wonderful decoration of the recreation area.

It is not difficult to create such heroes. Small difficulties can arise with a face. But even with this task you can do it if you show zeal. In addition, a pre-fabricated stencil can be used.

Progress:

1. It is necessary to cut a circle out of plywood. Its diameter should correspond to the internal dimension of the tire.
2. Draw on the plywood face of the character. After drying, insert it into the tire.
3. Cut out the ears. It is better to use a piece of unnecessary rubber. In this case, they can easily be bent. Secure the ears with screws.
4. To give support, you need to think about "legs". It can be bricks painted in the right color. A good option will be the wood bars.

Making such crafts from tires for a children's playground, do not forget that one character is not enough. It is better to make two Smeshariki. In addition, think about interesting decor. For example, one of the heroes can be attached with a self-tapping toy guitar.

Fairy tale characters

Having carefully studied the above-described principle of work, it is possible to produce more complex crafts from tires for a children's playground. The wolf, the hare, the bear will be excellent ornaments of the zone for kids. Such characters, as if left out of a fairy tale, will cause the children a lot of positive emotions.

It will help to make such hand-made articles from tires by the master class:

1. For the character will need 4 tires. It is desirable that one of the tires is larger than the others. It will be the body of the hero.
2. Two tires should be dug into the ground. You can use even one tire, having cut it first. These are the paws of the future animal.
3. On them, with the help of screws, a large tire is attached. From the plywood is necessary to cut a circle, which will become the belly of the hero. It is attached to the tire.
4. Top with screws screw a small tire - head. Also, cut a circle of plywood for the face.
5. Hands can be made of rubber. Fix them with screws.
6. Now you need to cut out the ears, depending on the character. For the bears are suitable mugs of plywood. For a wolf - two triangles. The rabbit has a more complicated form of ears.
7. Now it's up to the creativity. Draw a face, tummy.

The Amazing Machine

Young motorists will be delighted with such crafts from tires for a children's playground. Machines are not difficult to make. This is possible for any parent.

Progress:

1. For the car you need 4 tires.
2. One of the tires is laid horizontally. On either side of the tire, they are mounted vertically. This is the seat of the future motorist and the rear wheels.
3. To ensure comfort during sitting, it is better to place a piece of plywood on the horizontal tire.
4. Ahead at a short distance, one more tire is being dug in. It will mimic the front wheels.
5. To give more credibility to the car, attach the steering wheel, the old headlight and the unnecessary lever.
6. Consider the back of the seat. This may be an additional tire or a piece of plywood.
7. Do not forget to paint "auto".

It allows to more clearly understand how to make crafts from tires for a children's playground, photo.

Original swing

Without them, any playing area will seem unfinished. Therefore, when planning to create wonderful handicrafts from car tires for a children's playground, be sure to design the swing.

You can make them in several ways. If you attach one rope to the tire, you will receive a vertical construction. Using three ropes tied at the same distance, make a perfect horizontal seat.

The main thing is to choose a very strong rope or even a chain. The tire must also be strong.

The Magnificent Sandbox

This is the easiest crafts made of tires for the children's playground. Having developed a fantasy, you can create an original sandbox.

A few excellent ideas will help to choose the necessary design:

1. If you plan to take a large area under the sandbox, you can limit this zone to vertically exposed tires. It remains to paint and decorate them.
2. For a small sandbox, you can use one large tire. It is placed horizontally. Be sure to color the tire. It remains only to fill in the sand. Installing a high stick and attaching a piece of cloth to it, you can simulate a mast with sails. In addition to the decorative function, this design will protect the crumb from the sun's rays.

As you can see, it's easy to make a variety of crafts from machine tires. And it's incredibly interesting!

A zebra or a giraffe?

This is the most common crafts made of tires for the children's playground. In addition, it is very easy to make them yourself.

Create the original animal as follows:

1. Half-dig in the ground a vertically installed tire. This is the torso of the future animal.
2. Next, dig a vertical pillar. You can use a beech tree. The height of the post should be 2 times the length of the tire. This is the neck of the animal.
3. A head is placed on top of this post. It can be made from plywood. But this design, unfortunately, is devoid of volume. An excellent "head" can be a plastic bottle. In this case it is easy to cut the ears.
4. After installing the structure, the animal should be painted. Be sure to connect children to the creative process. They will definitely like to apply zebra strips or color a good tiger.

Slightly modifying the "head" and the coloring, you can get an ostrich or a horse.

Making a rocking chair

When planning what else it is possible to make crafts from wheel tires, do not forget about the game zone for crumbs. An excellent solution will be a rocking chair. To create it will have to work a little.

You can make a design by the algorithm:

1. Stock up with a solid tire and seat board.
2. Cut the tire across into 2 parts.
3. To the board, nail two bars on the width, which corresponds to the size of the wheel.
4. Paint the tires and the board with bright colors.
5. Connect the cut ends of the wheel to the board.
6. Be sure to check that the rocking chair does not have protruding nails and gaps.

Ornaments for the site

However, do not forget that you can make a variety of crafts from garden tires for yourself.

Very popular are:

1. Flower beds made of tires. This is a beautiful piece of jewelry. Tires are used almost in its original form. It is necessary only to decorate such a pot. Some owners build them in a certain way, creating the most amazing designs.
2. The flower-hedge. This is a more complicated option. It will require two kinds of tires. Big tires will be flowerbeds. They are installed horizontally. Smaller tires are a "hedge". They are placed vertically, combining with the established "flower beds".
3. A beautiful swan. With a little effort, you can create amazingly beautiful crafts from garden tires for yourself. Very elegant and noble looks on the swan. In addition, a wonderful masterpiece can be used as a flower garden.

Swan out of tire

An ornamental bird will be a wonderful ornament for an artificial pond, which can also be made from a tire. A beautiful design, which can not be torn off, will require a little effort. So, let's see how to make such crafts from tires.

A master class in this will help:

1. On the tire it is necessary to put marks on which cuts will occur.
2. Using a sharp knife or electric jigsaw, cuts are made strictly along the lines.
3. A little tip: in the body and neck of the swan, cut through small holes. Through them it is necessary to pass a strong wire. It is she who will provide the necessary pose for the swan - a certain skeleton.
4. Give the bird the desired shape.
5. Now it remains to decorate the swan. The most popular color is, of course, white. However, a silvery swan or gilded look no less magnificent. Do not forget about the red beak.

Conclusion

Now, knowing how to make crafts from tires, connect your imagination and start creating. Do not forget that amazing and unique masterpieces can be born from the most common improvised means - from old unnecessary tires.