How to make a cat out of paper: an instruction with pictures

Feline - a harmful and capricious animals, but at the same time, they are affectionate and obedient. The art of origami is a fascinating and interesting activity. This article will describe step by step how to make a cat out of paper - a dear creature.

What will be required for production?

For production, you need a piece of paper with a ratio of length to width of 1 to 3. The most preferred size is 6 by 18 centimeters.

How to make a cat out of paper. Step-by-step instruction

Drawings and drawn on them will serve as a guide:

• Lines - concave bends;
• Point-dash - convexity.

Steps

1. It is necessary to fold the paper strip in half.

2. Each side needs to be folded in two in order to chart future folds. Then they must be deployed so that the wrong side is on top. After that, you need to outline the folds to the left to make the cat's face. Binding refers to the bending and unbending of the paper with a return to its original state. First, you need to bend the left corner to the right side. Then similar actions are carried out with the right.

3. After all the folds are planned, the workpiece must be fully deployed. The middle longitudinal fold should be concave, and from the left and right sides there should be 2 convexes reminiscent of the cat's ears. Next, you need to rotate the sheet of paper 90 degrees and form bulges and grooves.

4. Then you need to fold each diagonal of convexity and lift them up, while simultaneously pressing on the middle of the head. The previously created folds form a failure. Scissors are not required. It is necessary to move downward, forming a body to make a cat out of paper. It is necessary to control the correctness of the creation of protuberances and depressions.

5. Based on the image, you need to form a chin in order for a cat made of paper, made with your own hands, turned out to be more attractive and interesting. The figure shows a green triangle, it must be found by the planned folds on the workpiece, and, squeezing the fingers from the inside, form a muzzle. Observance of the rule that the upper corners forming the chin should move downward, necessarily.

6. When the chin is ready, pay attention to the result from the inside, based on the figure. Then the ears are formed. To do this, bend each to the cent and, stepping back a little, bend back. Look at the picture. Press harder. Press on the inside of the crease in the middle of the head, so that the forehead of the cat is slightly rounded. Pay attention to the opposite side, it must match the image.

7. After the muzzle, head and ears have been formed, it is necessary to create a tail. To begin with, it is necessary to form a contour of the tail fold line.

8. After the basting, you need to create two diagonal bends. They serve to sustain the body of the cat. With the help of diagonal arches, angles are formed on both sides.

9. Further on the plane perpendicular to the body it is necessary to form a tail. Both sides of the lower part are diagonally flattened by bending the corners inward. With these actions, the cat's tail will look more proportionate.

10. The final step of the step-by-step instruction "How to make a cat out of paper" is the twisting and bending of the tail. When properly formed, this part of the figure affects its stability and serves as support and support.

The article describes one of the simple solutions to the question: "How to make a cat out of paper?" Even a child can cope with this task. In addition, that this activity is interesting, it is also developing. Try it yourself - you will succeed!