Chandelier repair: recommendations of professionals

When a chandelier breaks down, many people immediately buy a new one. But you can use another option. For example, self-repair chandelier. This method is much cheaper. All you need is to learn all the subtleties and secrets of repair.

Checking the operability of the switch

The first cause of the idle state of the chandelier is the problem with the switch. In this we are convinced by professional electricians.
According to them, this is the most important element that feeds our facility. It will be really insulting if the chandelier repairs begin, when the whole problem was covered in a faulty switch. So, first you need to get close to the terminals. To do this, using a screwdriver or manually removed keys and frame. Then you need a test screwdriver. After disconnecting the device, check the phase. The switch is considered to be working if it changes at the terminals.

Inspection of light bulbs

They also need to be carefully checked. Specialists in this area assure: it happens that with a large voltage jump they fail. When using normal parts, check the integrity of the filament. Energy-saving models are checked using a tester or by screwing it into another lighting device.

Modern chandeliers have special fuses, which should also be checked. If they burn out, then you need to replace. And the fuses must meet the technical parameters. Information on their characteristics can be found in the documents issued when buying goods.

Repair of wiring

This is another important point. The wiring status affects the operation of the chandelier. In order to inspect the object, it is necessary to turn off the power and remove all decorative elements preventing access to the wires. After this, a thorough examination is carried out. According to experienced electricians, the signs of breakage are darkening. This indicates that a short circuit has occurred . Therefore, it is necessary to repair or replace it. First you need to buy 4 plugs, which can be found in any construction shop. Then disconnect the wires in the twist and solder each connector to each of them. After that, they can be connected together. Accordingly, it can be concluded: if the cause of the breakdown is similar to the above, repairing the chandelier with your own hands does not take much time and effort.

Features of replacement of LED devices

Professionals say that this will not be difficult. The first thing that needs to be checked is the repair of LED chandeliers - a transformer through which an electric current is supplied. For these purposes, you need a tester. If everything is in order, then we pass to the next test, which concerns the operation of the LEDs. Using a 9-volt battery and a resistor, each diode is tested individually. This is done to determine the non-working item. In case of its detection, a closure is performed. Repair of chandeliers is finished. Next, the entire structure is assembled and hanged in place.

Repair of halogen chandeliers

Quite a frequent problem of loss of efficiency of such devices are bad contacts. In most cases, the repair of chandeliers is associated with solving this problem. To fix it, you need to clean the contacts. First, check that all the wiring is connected correctly. If the outside of the damage was not seen, then you will have to use the tester to determine.

Electricians also pay attention to ordinary people in the junction box. All connections must be in perfect condition, that is, the output voltage must comply with technical standards. To find out something that is not right, the tester will also help. If the instrument shows zero during the measurement, the transformer should be replaced.

Other problems

The main malfunction is the incompatibility of many kinds of light bulbs with old models of luminaires. It happens that the twisted energy-saving part does not work. Therefore, you should prepare for the repair of the chandelier. But you can try one more thing. Experts suggest: you do not need to spend much energy to screw the bulb. It's all in the basement. As a rule, in many products it is made of soft brittle material, which undergoes any strong mechanical action. Halogen lamps are specially designed for circular contacts.
With this arrangement it will be difficult to disable them. Some types of halogen bulbs can be screwed infinitely. But such movements also have a limit. Having reached it, the glass starts to rotate relative to the plinth. All this is due to problems with contacts. Thread on modern bulbs, as a rule, is short, and it does not reach the bottom. In this case, repair works are carried out with contacts.

How to solve such a problem?

First of all, you need to make sure that the chandelier is in a non-working condition. The phase must not go beyond the cartridge. If this happens, you must turn off the power in the electrical panel. Further, as electricians with experience say, it is necessary to perform such actions:

1. With the help of a screwdriver, the contact is bent. The main thing is not to overdo it. The contact must not be in a vertical position, but slightly at an angle.
2. If the base is provided with a lunate contact, then the work will become more complicated. The old models of lighting devices it is located vertically. For this, it is necessary to gently lift one of the contact petals upwards. In some cases, they can be straightened.

Why do we need all of the above activities? Their meaning is to ensure contact between the cap and the bulb. As a rule, it needs to be checked several times in order for the light bulb to start working. It is necessary to monitor the integrity of the cartridge. If it is broken, then it must be replaced.

Chandeliers with remote control

To date, there are many automatic devices. They work with the control panel. Repair of Chinese chandeliers boils down to testing this device, it will not hurt to inspect the power supply unit. The next procedure is to check the integrity and operability of the lamps. For this, the chandelier is turned off for 15 minutes. Then, using a cloth, unscrew the light bulb and inspect it. After that, they are engaged in a transformer. If all the previous elements are in working order, then the problem lies in the electronic control unit. It's easier not to bother with its repair, but to buy a new one in any construction shop. When replacing it, it is necessary to designate each wire so that when you reattach it, do not make a mistake.

Repair of chandelier from crystal

Professionals who have been involved in electricity for many years say that the most common cause of breakage of such luminaires is the breakdown of the main elements. Most people try to fix the problem with glue. But whatever the master, the crack will still be visible. Therefore, this method does not immediately work.

Chandeliers ceiling can be repaired with a special silicate adhesive. How is the procedure carried out? Before starting the work, prepare the surface of the crystal. The breakaway piece is washed with water or a soapy solution, wiped and dried. Then the surface is degreased. Such preparatory measures are necessary to ensure that the connection is strong and there is no visible nadkola.

A glue is applied to the surface of the crystal element and a connection to the chandelier is made. Remains of excess mass should be removed with the help of tissue, until it withered. After performing the work, the chandelier must be left for a while, so that the parts are completely glued together. Every crystal can repair a crystal chandelier. Therefore, when it breaks down, you do not need to throw it away and immediately buy a new one.

Conclusion

If the chandelier breaks, be sure to try to repair it yourself. This will cost you much cheaper than buying a new one. Start the repair with a check of the switch. Here it is worth paying attention to the presence of a phase in the terminals. Then we inspect the bulbs. Energy-saving models are checked by means of a tester or by screwing it into another lighting device. The wiring status is then checked. If the result is positive, you need to determine the state of the contacts in the base. If necessary, some parts must be replaced. In fact, the procedure does not take much time and significantly saves money.