Silicate glue: application features

Silicate glue is used in various areas. Without it, it is difficult to do in construction, the material is useful for waterproofing. In addition, it is used in the production of acid-resistant, heat-resistant and water-resistant concrete.

The use of silicate glue as a supplement to building materials makes it possible to increase their strength, weather resistance, durability and fire resistance. Silicate glue (potassium liquid glass) is used for impregnating fabrics and wooden products, which allows them to impart a high density and fire resistance.

The remedy can be used as a protection against injuries or pruning of trees. With its help make priming of brick, wooden, concrete, plastered surfaces, and also waterproofing of pools and capacities. Silicate glue is useful for gluing products from paper, wood, glass, cardboard, leather, fabric and porcelain. In addition, you can perform gluing on any surface of linoleum and facing tiles.

Silicate glue can be used both as an independent product, and in combination with various materials. It can be used as a cleaning and detergent. Adhesive compound is used in paper, textile, chemical, fat and soap industry. It is an excellent environmentally friendly antiseptic, prevents the formation of fungi, rot and mold.

Before use, the mounting glue should be mixed, it is recommended to prepare a brush, roller and brush for work. Before application, the surface must be cleaned of various contaminants, wood materials should be cleaned with sandpaper. During operation, the silicate adhesive is applied to bondable surfaces, which are then pressed against each other.

When using a primer for surface treatment of screeds, cement and water glass are mixed in the same ratio. To create a waterproofing of concrete wells, their walls are treated with silicate glue, and then covered with a solution prepared from liquid glass, sand and cement (in equal proportions).

For the manufacture of waterproof plasters, sand and cement (2.5 to 1) should be mixed with a 15 percent solution of silicate glue. The same composition is used for repair and masonry of external parts of furnaces, chimneys and fireplaces.

For waterproofing of basements, ceilings, floors, walls, pool devices take silicate glue and connect with 10 parts of concrete solution.

As usual work on gluing the glue material is taken at the rate of 200 - 400 grams per 1 square meter.

To clean dishes, pans, pans and other items, you need to prepare a solution of liquid glass with water in a ratio of 1 to 25. After this, the dishes should be boiled in this composition.

Silicate glue is also used to repair aquariums and gluing glass, they impregnate lime building materials, concrete, wood and cement products, which increases their strength. With the help of glue make silicate paints, remove grease and oil stains from clothes.