BBQ oven for a pergola with own hands

If you decide to make a barbecue oven for a gazebo, then use a certain technology that will ensure not only a long life of the entire structure, but also its excellent appearance. With the help of such oven equipment it will be possible to prepare meals in different ways. Among other things, the installation will be located within a gazebo, which will make arranging even a light rainy season.

Preparation of materials and tools

Before you start work, you need to stock up all tools and materials, among them you can select sand, cement, reinforcement, steel corner, hammer, and pliers. For the furnace itself, a refractory brick is required , but the foundation will be poured with concrete. You can buy a steel grate, as well as a building level, although the latter is often in the arsenal of the master.

Locating

The barbecue oven for the gazebo should be located in such a place that it does not create a fire hazard situation. This recommendation is correct, if it is a gazebo, which is yet to be built. If this design is already installed, then the wizard will not have a choice.

If there is still a place to choose, then the recommended territory for the equipment is next to the house. The main thing is not to break the exterior composition, otherwise the barbecue will be in disharmony with the landscape. It is important to take into account that when the device is operated from the device, an impressive heat will emerge. Therefore it is recommended to have a barbecue next to the sprawling trees. This is due to the fact that the owner, who is engaged in cooking, will certainly want to leave the arbor while the fire flares up to the maximum limit.

When choosing a location, you should not start construction next to flower beds and beds, as soot and soot can adversely affect crop plants.

When installing a barbecue oven for a gazebo, you should remember that the structure should have enough free space. Indeed, during the holidays a large company will gather in the territory, each member of which should feel comfortable. Do not forget about the interests of neighbors. If you start manipulating near the fence, all the soot will rush towards the area that is located next to it. It is best to prefer the territory that is in the central part or near the road.

Foundation construction

A barbecue oven for a gazebo should be installed on a level surface. It should be cleaned of debris by arranging the belt structure. Two foundations should not be interconnected. That's why it's necessary to make marking with the help of a cord and pegs. Further, a trench is excavated, and crushed stone is poured onto its bottom, which should be well condensed. Then in a course there are boards from which formwork should be equipped. It is important to strengthen the base using a reinforcing mesh.

At the next stage, the master can start pouring concrete. The design should then be left for a week. This period will be enough to enable the following work. If you install a barbecue oven for a gazebo with your own hands, it is important to ensure the correct depth of the basement. It should be located below the freezing line of the soil.

Work on a barbecue oven

After the base has been prepared, it should be marked with a future design. After that, you can start building walls. The first row must be laid out compulsorily using the building level. In the corners it is important to observe the correctness of the parameters. When laying the next row of the product, it is necessary to move it by ½ from its size.

As soon as you reach the sixth row, you should begin to form a support ledge on it. For this, the brick should be laid across, stepping halfway into the interior. This will allow you to equip the shelf. On this row should be mounted 3 longitudinal rows, the thickness of which should be equal to 1/2 of the brick. A similar protrusion is required in order to install a coal tray on it, and also to lay a grate for frying.

When a barbecue oven is made for a gazebo with your own hands, you can use a workpiece cut out of metal for the pallet. The tenth row should be laid in such a way that it is possible to repeat the projection. With further use this shelf will prove itself as a very necessary element when it becomes necessary to arrange ready-made meat so that it does not burn out. On the 10th row should be mounted three more, which have a spoonful bandage. Between the protrusions it is necessary to install the bars of the armature, placing them two, through the row. They can be in each row. With the help of these elements, it will be possible to adjust the height at which the grill with meat will be installed during cooking.

The installation of a barbecue oven in a gazebo may involve the use of steel staples. These elements are necessary for the installation of the grill for frying. They can be installed in the seams between the layers. The same technology can be used when it will be necessary to install a pallet for coals.

Finish

It is important to ensure not only the reliability and functionality of the design, but also an aesthetic appearance. If you are going to do the work yourself using brick for the first time, then it's hardly possible to build a masterpiece. That is why it is recommended to finish the finishing works at the final stage. As a material for this, ceramic tiles are used. The surface can be covered and decorative plaster, very effectively looks natural stone. The simplest version is the traditional plaster, the surface of which is painted. Perform such work should only after the masonry is finally ready and dried.

To start, the stove must be defrostered, it is good to clean the surface using a steel brush, and also to separate the seams by 5 millimeters. On the surface of the bricks is fixed a steel mesh, the cells of which can have a size of 10 to 20 millimeters. On the moistened hot surface it is necessary to apply the solution, the first layer should be quite liquid, whereas for the second solution it should be made more dense. After the plaster has been applied, it should be wiped.

If you want to make a stove-barbecue for a gazebo made of bricks, so that the design looks really impressive, then you can use tiles. They are easy to clean from all sorts of dirt, among other things, they are not able to pass flue gases. This material is also good in that it has significant heat emission. It is important to take into account that tiles are material that is made by hand. This indicates that even in one drawer the products can have a difference in shape, pattern, color and size. The peculiarity of the installation of tiles is that they are laid in parallel with the installation of bricks. Thus, it will be necessary to install a series of tiles, and only after start to lay the brick in the second row.

Recommendations of the master

If you are building a barbecue oven for a gazebo, the scheme, photos will help in the work. It is important not to forget about the waterproofing. To do this, you can use a polyethylene film or roofing material, the material should be laid on the surface of the foundation. The internal combustion part must be laid with the help of refractory fireclay bricks.

Metal barbecue oven

You can, of course, buy ready-made barbecue ovens for gazebo, if you do not have too much time and no relevant experience in the work. However, it is possible to make a metal structure quickly enough. To do this, you should prepare an old canister, designed for propane.

Preparatory work

To carry out the manipulations, you need a propane empty cylinder, a welding machine, a corner, a steel pipe and a metal tap. To speed up the process, it is necessary to rent a grinder. It will take a metal strip, as well as an armature. The last of them should have a diameter of 20 millimeters. As for the steel strip, its size should be equal to 20 x 4 millimeters. The metal tap should be selected with a turn of 90 degrees.

Production features

If you will be making a barbecue oven for a gazebo, the photo of the construction can be considered in the article. Start the process with empty the cylinder. After it should be rinsed well. Only at the next stage it is permissible to cut out the hole, during which the grinder is used. The central part of the cylinder must be cut out, and the lid should be made from the parts obtained. By welding, the valve should be cut in such a way that it is possible to install a casing in the hole .

Assembling

When an integrated oven-barbecue grill for a gazebo is made, the drawings must be drawn up before the work begins. If we are talking about a gas cylinder, which will form the basis of the design, then at the junction of the pipe and the branch it is necessary to install an opening flap. It will allow to regulate intensity of draft. It is necessary to make this element from a metal cloth, and also from a steel rod. There can be a great variety here. On the edges of the cutout on both sides should weld a corner, which is necessary for reinforcement.

The next stage is the installation of loops and work to seal the lid. Hinges can be made from a piece of reinforcement and pipes that have a suitable diameter. If you have the experience of such work, then the loops can be made independently. Such an oven for barbecue arbor with barbecue can be set on a certain elevation. The stand must be made of reinforcement and pipes, which must be reinforced with each other by welding.

Recommendations of the master

The hole in the upper part of the cylinder must correspond to the diameter of this parameter at the tap. The last element should be fixed to the formed hole by welding. The patches can be made from a steel strip, after which the workpieces are welded to the lid along the perimeter. This will become a seal.

The stand must be made taking into account the presence of stiffeners, which are located at the bottom of the frame. On top of the main elements, which are made in the form of arcs, it is necessary to strengthen the pipe, which will fix the upper part of the structure. Hold the balloon will be the arc, which must be strengthened on top of the stand.

Conclusion

When making an arbor for a barbecue with a fireplace-oven, it is necessary to take into account that the first of them must have appropriate dimensions. Whereas if oven equipment is manufactured after installing the gazebo, then, on the contrary, it should be customized for the basic structure. Whichever technology you use, it is important to comply with fire safety rules. Among other things, the design should be as strong and reliable as possible, as it is actively used for many years. It is not necessary to save on materials that will undergo periodic high temperature loads. This applies not only to bricks, but also to steel. Success in construction!