Automated Control and Instrumentation Technician: what kind of profession, classes, training

The profession of a locksmith dealing with instrumentation is becoming more urgent every day. What is the reason? This will be discussed later.

Who is a commissioning engineer?

Practically at any enterprise there is a set of various devices, gauges, counters and other technical devices. For all such equipment, someone must watch. The Instrument Accelerator is the same specialist who is able to control the safe and efficient operation of all devices available in production. So, the professional is obliged to conduct periodic inspection of equipment, its qualitative repair or replacement.

It should be noted right away that the profession in question is not that simple. After all, a competent specialist should have a fairly wide baggage of knowledge, skills and abilities. Without all this, it will not be possible to carry out its working functions qualitatively.

What should the Controller know?

The profession has as many as seven categories, and therefore the knowledge of specialists with different qualifications can significantly differ. However, it is worth highlighting the most basic points that are fixed in the special job description of the employee. Here are some of them:

• The basis of technological methods for locksmith production;
• The device of the working tool and its purpose;
• Receptions, methods and means of working with springs in a hot or cold state;
• Methods of performing locksmith work;
• Basic electrical work;
• The basis for connecting the wires;
• Properties of materials for tinning;
• Basic safety precautions, methods and means of protection during operation.

...And much more. It is also necessary to bring the basic practical skills that an employee must possess. Among them:

• Performance of bench work;
• Competent use of tools;
• High-quality soldering;
• Elimination of defects, etc.

Thus, a mechanic for instrumentation and automation should have a fairly large stock of knowledge and skills. Moreover, this employee must constantly develop his knowledge and skills. After all, progress does not stand still, and working equipment is constantly being improved.

INSTRUCTOR'S RIGHTS INSTRUCTIONS

The specialist in question, like any other officially working person, has a certain range of rights. What is this right? How and when can they be implemented? The Instrument Accelerator, according to a special job description, has the right:

• Constantly improve their skills and professional skills;
• Demand management documents or tools necessary for the work;
• Make all necessary benefits or social guarantees;
• Receive wages in full in a timely manner;
• To offer the authorities various ideas or plans for improving the organization.

Above, only the most basic rights possessed by the specialist in question were mentioned.

Responsibility of the instrument and control instrument installer

The mechanic for instrumentation and automation has not only rights, but also a certain share of responsibility for some of his actions. What in this case fixes a special job description? Here are the main excerpts from this document:

• The employee bears disciplinary responsibility for staying in the workplace in the state of drug or alcohol intoxication;
• The employee must be held responsible for the total failure to perform or otherwise improperly perform his or her basic work functions and responsibilities.

In addition, the employee is responsible:

• For causing the organization of material damage;
• For committing offenses or crimes in the workplace;
• For conflicts or inciting hatred in the work collective.

Thus, the mechanic of the KIPiA, like any other employee, is obliged to bear disciplinary, administrative or criminal responsibility for certain types of deeds, depending on their severity and scale.

Necessary for work education

How and where it is necessary to study in order to get the profession of "instrument installer"? Training for this profession is available almost everywhere, and it will be almost impossible to obtain the necessary education for the specialty. So, the specialty of the same name is present in almost any technical school or college, it is possible to enroll in them on the basis of the 9th grade of the school. Duration of training is about 3-4 years. However, it should be noted that there are special courses where you can get qualifications much faster. There are, however, they are far from everywhere; But the number of disciplines and curricula compared to the educational institution is not much different.

Among the necessary educational cycles for education are:

• Educational practice;
• Physical Culture;
• Professional attestation.

On the 2nd and 3rd level in the profession

A single tariff-qualification referencebook characterizes the profession in question as a work having seven categories. For each skill level there is a range of duties and functions. The 2nd and 3rd categories in the profession are, you might say, initial. As a rule, only graduates of colleges, workers with little experience, etc., are concentrated here, as a rule. Here are examples of works typical for a specialist with a 2nd or 3rd degree:

• Work with large relays, distributors and regulators; Their assembly and repair;
• The assembly and calibration of copper or platinum resistance thermometers;
• Assembly, repair and adjustment of compact thermocouples;
• Manufacturing, repair and commissioning of various degree of complexity of the clamps;
• Drilling, grinding, unfolding, pegging and carrying out other work with gears, bushings, locating rings, screws, etc.

On the 4th and 5th level in the profession

A single tariff-qualification reference book contains instructions for job descriptions of specialists of the 4th and 5th categories. It is in these documents that the main examples of the specialists' work are fixed. Here are exemplary types of work that a locksmith with a 4th rank should perform:

• Capital or current repair of scale commodity or automobile scales with a pointing device, bunker or analytical scales;
• Repair or restoration of the machines;
• Replacement of necessary parts in auto regulators;
• Check, repair or adjustment work.

The Instrument Accelerator, having the 5th rank, is capable of performing operations of approximately the following type:

• Repair and alignment of sighters;
• Replacement of gearwheel axes;
• Balancing of moving instruments;
• Repair of installation tables;
• Revision of polarized relays, etc.

About the 6th and 7th grades in the profession

The ranks of the KIPiA adjusting engineer indicate very much: on the level of education, work experience, professional skills, etc. The 6th and 7th levels of qualification are considered quite important and prestigious.

What types of work are typical for specialists who have the 6th grade?

• Adjustment on the operating equipment of autoregulators and heat measuring devices.
• Repair of electronic equipment.
• Work with automatic batch scales.
• Work with wagon model balances.
• Repair of oscilloscopes.
• Works with magnetic amplifiers.
• Repair, commissioning and commissioning of various electronic sampling devices.

What types of work are typical for the specialist with the 7th grade? Here are some examples:

• Testing and verification of microprocessor devices (pressure sensors, differential pressure meters, etc.);
• Testing and testing work with gas analyzers, measuring instruments (moisture, salt, pressure, etc.).

About the 8th grade in the profession

The specialist with the eighth category is considered the most important and experienced specialist in the production. Naturally, this kind of employee is endowed with particularly complex functions. What in this case fixes the professional standard?

Instrument-commissioning technician KIPiA with the latest level of skills, in addition to management duties, should also:

• To compile and maintain programs of microprocessor controllers, regulators and other devices;
• To select the necessary characteristics that would meet the efficient, but at the same time, economical and optimal operation of the equipment;
• To check, test and put into operation level gauges, recoders, vibrometers, devices with intelligent pressure sensors, paperless recorders, computer-based devices and the like.

A specialist may have many other functions, but here everything will depend on the orders of the authorities and the place of work.