Aerator for the lawn with your own hands: ideas for creating

If the lawn or lawn has faded, then you need to supply them with an aerator. Without this adaptation, the green plantations will not grow properly, as they need air that is not able to pass through a sufficiently dense soil.

Need to use the described tool

If the plants are not supplied with oxygen, which in particular concerns their roots, they will gradually begin to die. This is relevant for territories where the soil is characterized by a high degree of density. You can make an aerator for your lawn with your own hands, for this you do not have to stock up with some special materials and tools. For the work you can choose one of the existing models that is right for you.

Aeration - first aid to plants

Oxygen is absolutely necessary for plants to cause oxidation of minerals, as well as organic decomposition. Without such manipulations, no fertilizer, watering and care will not be able to stop the rotting of the grass. The lawn of any destination, be it sporty or universal, will suffocate without a procedure such as aeration of the soil. In particular, this applies to coatings, for which people often move. You need an aerator for a lawn, you can make it yourself. This is also necessary for those areas that are often subject to precipitation. Oxygen enrichment is necessary periodically, following a certain schedule.

Periodicity of soil enrichment with oxygen

Such manipulations should be made at least once, than once during the season. However, this is true if it is a question of sufficiently light soils. If, on your site, clayey soil, a lawn aerator with your own hands must necessarily be made, as it will be used much more often. The frequency of the described procedures will need to be doubled.

It is necessary to produce aeration outside the schedule in the event that the drought has been prolonged. This is also true when the warm season is accompanied by endless rains. To do this, you can use electric or gasoline appliances. For emergency help plants can also use hand tools. Determine the symptoms of insufficient air, which comes to the roots of plants, you can use conventional forks. They need to pierce the lawn, getting deeper by 15 cm, if in the holes formed the plants do not have an active vital activity, then continue the piercing in this way you need to continue. Puncture the surface of the lawn with a hand tool, while retreating 10 centimeters from one puncture to the next.

Manufacture of a power tool

A lawn aerator can be easily manufactured by hand. To do this, you can use the design, which are called gaznopostupami. You can make them using ordinary shoes. In this case, the nails will need to be attached to the soles. In the end, you should get shoes with spikes. In order to perform such self-made crafts, it is necessary to use a pair of shoes, which in the future you will only use for carrying out these manipulations.

Under the size of shoes you need to prepare wooden boards, which can be cut with electric jigsaw. You should get something like a foot resembling a hedgehog. As a template, it is recommended to use any shoe. It is necessary to choose a board that is quite impressive in thickness. This will ensure the retention of nails in her body. In the finished plates you need to twist the long nails, you can use for this kind of length self-tapping screws, which are screwed into the prepared soles. It is necessary that such nails enter the soil not less than 10 centimeters. Only then can you ensure the effectiveness of these works. Now you need to attach the received board to the shoes with the nails fixed on it. To do this, you can use straps, which are acceptable to use those that were borrowed from old backpacks. Now you need to fasten these two designs to each other, and then walk around the lawn and enjoy the effect in a few days. The lawn will begin to breathe again.

Making an aerator for a large lawn

Homemade can also be made for a large lawn. This will not only speed up, but also simplify the work. Any master can perform this tool. To do this, it is necessary to prepare a part of the pipe, which should have a significant diameter, its length should be 50 centimeters. You will need iron, as well as nails, the length of which is 10 cm. It will be necessary to prepare and a welding machine, as well as bearings and sebaceous tubes. The manufacturing process will not be accompanied by great difficulties. A beautiful lawn will turn out if you use such equipment, which is made by making a cylinder from a pipe and steel. A shaft with bearings must pass through this element. Empty space inside the pipe should be filled with sand, but more efficiently use fine gravel. On the outer perimeter of the pipe, it is necessary to fix nails by welding, placing them in a checkerboard pattern. The point of fixing must be turned outward. In the end, you should get an element that resembles a metal hedgehog.

Final work

A beautiful lawn you will be able to get, if you make a tool, which is described in the article. At the last stage it will be necessary to strengthen the received elements on the bracket, which has a wooden handle. This will make using the tool more comfortable. It will be very easy to push it.

Alternative tool making

Aerators for lawn electric are preferable to buy in the store, but that's what concerns mechanical devices, then it's quite easy to manufacture them yourself. The first type of tools is intended for processing large lawns. In private possession, lawns are most common, which have a less impressive area. The next version of the aerator is quite simple. For work it will be necessary to prepare a screwdriver, steel or wooden plates, the width of which is 5 cm. As for the length of the plate, it can have any dimensions. Such an aerator mechanical for a lawn can not be made without the use of self-tapping screws.

Self-tool manufacturing technology

In the plates it will be necessary to make holes, placing them in such a way that they are oriented in staggered order. Then, using a screwdriver, it is necessary to install self-tapping screws. Plates can be mounted on a frame, which will simply strike the surface of the plantations. The aerator for a lawn gasoline, of course, will allow to make works in less short terms, but its use assumes expenses for fuel that increases cost of service of a lawn. This is not always welcomed by those who keep the lawn for their own pleasure on the territory of the countryside.