Yellowed plastic: how to whiten with the help of improvised means?

From plastic created a large number of electronics, appliances for household use, kitchen accessories, toys and other products. This kind of material has firmly entered our life due to its wide operational capabilities.

What is remarkable about plastic?

This material is resistant to moisture, acids and alkalis. However, it has a significant disadvantage - under the influence of ultraviolet it loses its original appearance, therefore products that contact the sun, in the course of time, begin to acquire a yellowish tinge.

White plastic attracts buyers with its cleanliness, fresh look and ability to fit into any interior. It is actively used for both interior and exterior decoration of premises. But over time, unfortunately, all aesthetics are lost. It is possible to combat this problem. It is enough to know how to whiten the yellowed plastic.

Bleaching agents

To give the original appearance to a white product, you can use:

• Acetone;
• Chlorine bleach;
• Alcohol;
• Soda ash;
• Washing powder;
• Perhydrol.

You are afflicted by the yellowed plastic that has lost its former purity. How to whiten it? It turns out that this is not so difficult, it is worth remembering only a few ways.

Methods of bleaching

By the way, not only the ultraviolet rays can be yellowed plastic (how to whiten it, we'll tell you later). The product can only be covered with dust and soot, and in this case there will be no difficulties. Such deposits do not change the structure of the plastic, so you can wash it with a brush and a solution of soap. If the brush is tough, then you need to carefully remove the yellowness, so as not to leave scratches.

If the house has yellowed plastic, how to whiten it, can be solved with alcohol - isopropanol, ethanol, methanol and other types.

• Attention: when processing the product with such means in the room, it is necessary to thoroughly ventilate it. A bleaching procedure should be carried out in gloves and preferably in glasses. In order not to spoil the product, it is necessary to make a test for the reaction of the material on the applied agent on a small area of the surface.

In the stores you can find special napkins to care for plastic surfaces. After using them on the product, there are no scratches left.

In addition, you can use spray cleaners - the market today offers many of their options from different manufacturers. Thanks to the use of sprays, you can give the product an original look, make the color fresh and apply a protective layer.

In car dealers you can buy polishes for plastic items, which also help to cope with yellowness.

Aggressive methods of bleaching

If you decide looking at the yellowed plastic how to whiten it - this is not a difficult task:

1. For example, you can leave the product details overnight in a chlorinated bleach or hypochlorite. The yellowness will disappear, and the plastic will look like a new one.
2. Another option - to make a solution based on 1 liter of water, 1 tbsp. L. Soda ash and detergent. Within a few hours the yellowness should disappear.
3. By treating the plastic with perhydrolylem with the oxidizer several times, which is used to lighten the hair, it is also possible to achieve an amazing effect.

Purify the product with the same perhydrol can be, if you make a solution in the proportions: perhydrol - 2 tbsp. L., Powder bleach - 2 tbsp. L. And a liter of water. Before the procedure, it is necessary to wash the surface with soap and lower the product into a solution. It is important to regulate the course of the chemical reaction, avoiding a strong overheating of the perhydrol. For a faster process, you can use an ultraviolet lamp.

Acetone also perfectly bleaches plastic, but it can not be used for all types of products, since the agent can also serve as a solvent.

Yellowness on plastic may result from structural changes, in which case bleaching will not produce results. It is better to cover the product with an aerosol paint or to make a replacement.

Whitening Refrigerator

For housewives, how to whiten the yellowed plastic on the refrigerator is a constantly emerging question. After all, in the kitchen there is always a large concentration of vapors, splashes of fat and other cooking results. The refrigerator, especially if it is located near the stove, one way or another, will lose its attractive appearance.

As a rule, in this case, you can do without the use of aggressive means. It is necessary to use an acetic essence of 70-80% or a strong solution of soda. Use a cotton swab to wipe the areas with yellowness, then wipe off with a wet, followed by a damp cloth. Do not forget to use gloves, especially when working with vinegar.

Whiten the windows

If you have a yellow plastic on the windows, how to whiten it, you'll find out right now.

Windows and windowsills are most exposed to sunlight. How quickly they turn yellow, depends not only on the quality of the material, but also on the care of it. It is necessary to exclude smoking in the apartment, because the plastic absorbs the resin well.

Dust and plaque from fat are also quickly absorbed by plastic products, so it is necessary to conduct regular wet cleaning, since it is easier to prevent the appearance of a problem than to then look for ways to solve it.

Well clean the windowsill and windows chalk, dental powder and laundry soap. If you regularly spend washing the plastic, then such a tool will cope with fresh yellowness without difficulty. It is necessary to apply them separately, but sometimes you can combine them. After performing the procedure, wipe the product with a damp cloth.

As you can see, nothing is impossible! And if your wonderful white plastic has turned yellow, how to whiten it with minimal costs, you already know.