Kittens for cats with their own hands: a master class. Scheme, photo

In a natural environment, predators that belong to the cat family are instinctively clawed at the trunks of trees. But what to do for pets?

Why do we need scribes?

This procedure is necessary for animals, since claws grow quite fast and when walking, they give unpleasant sensations. Domestic cats, of course, are deprived of the opportunity that the wild have, only if at home you do not grow a tree. However, you can make a cat scratch for cats with your own hands. The master class, presented below, will allow each home master to carry out such works without special difficulties. In the store you can buy similar products, but they are quite expensive, and they can not last very long.

Preparation of materials

To carry out the work on the construction of a scribe, you will need a wooden bar, the height of which can vary from 50 to 70 cm. Store a jute or hemp twine, the thread diameter of which can be equal to 7 millimeters. The length of this element is not worth checking: in the store you can buy two finished skeins.
In the role of material for the product can be applied hard carpet. It takes a board or a piece of plywood: it will lie at the bottom. In form this element should be made in the form of a square with a side of 40 cm. While the thickness of the workpiece should be equivalent to 20 millimeters.

If you will make a cat scratch for your own cats , the master class presented in the article will allow you to exclude mistakes. In addition to the above materials, you need a flap of tapestry, faux fur or furniture upholstery - one of these elements will go to the finish of the base.

Dimensions should be chosen from the calculation that it was possible to close not only the sidewalls, but also the upper part. In order to cover the base, you need a flap of the same material, but its size should be smaller. This will close the top of the bar. Do not install completed items in the hallway or toilet - there the animal will not pay attention to the product. It should be installed in one of the rooms, and also provide free access. For twine, you need to choose only natural, strong materials, since the ones made of cellulose quickly become consumed and can even harm the animal.

Preparation of tools

If you will perform a cat scratch for your own cats, the master class will help you in choosing the technology that you need to use in the process. In addition to the above materials, some tools will be needed. Among them there are self-tapping screws, glue intended for working with wood, and also a screwdriver. Useful jigsaw or hacksaw (one of the tools will be used for sawing blanks).

Assembling

If you will make a cat scratch for your own cats , the master class presented in the article will allow you to exclude the occurrence of errors. After all the parts have been cut to the required dimensions, you can start assembling. The string is wound twine, every 100 millimeters you need to make the surface treatment with glue. This manipulation will help to secure the rope more firmly.

Once you reach the top of the bar, it is important to glue the final two turns together. On the top of the bar you need to apply a layer of glue, fixing there a tissue flap. From surplus materials you need to get rid of using scissors.

Do you want to get a cat scratch for yourself (with your own hands)? The scheme given in the article will help you.

In the next step, you can glue the base with the material. In the fabric, it is necessary to cut a hole, forming a side that will be slightly smaller than the side of the bar. The hole can be cut beforehand.

Nuances

The bar in the base can be fixed with self-tapping screws. After the fixation is completed, you need to check the design for loosening. The bar should not swing like a pendulum. It should be strengthened as much as possible. If the base is raised, it should be heavier with additional weight.

How to make a cat scratch for your own hands? Master class, photos - all the materials presented in the article, you can supplement your own solutions.

At this stage, you can assume that the device is ready for use. If you could not find the bar, then you can use a sheet of plywood. The element is pasted with string, and then is laid horizontally on the floor. As an alternative, the claw can be nailed to the wall.

The second variant of making a scratching blade

If you will make a cat scratch for your own hands, the master class will help you sort out the technology. For the manufacture of the below described option, polyethylene pipes, a furniture board, gypsum board suspensions, soft foam rubber, screws, carpet, screwdriver, twine, pliers, electric jigsaw, glue and furniture stapler will be needed.

Technology of work

If you will perform cat scratching with your own hands, the master class of which is presented in the article, you need to think in advance what features the design should have. Before purchasing materials, it is recommended to estimate the dimensions. At the next stage, the shield is cut using an electric jig saw to three separate pieces. Pipes are prepared in accordance with the necessary dimensions. On the lower platform, the location of the lower pipe should be noted. Suspensions for gypsum board should be bent at an angle of 90 degrees and fixed at the platform with the help of self-tapping screws. The pipe must be installed and secured using the same method. The platform is covered with a cloth, and on the underside everything is fixed with the help of a furniture stapler.

Further, the second shelf is fixed by means of hangers. For the upper shelf, two supports should be made. Initially, the suspensions are fixed, which must be bent at right angles. Tubes are screwed with screws to the suspensions. Over the shelf is covered with foam rubber. Here you also made such a scratch for cats with your own hands (master class).

Of paper, by the way, you can also do it. Instead of a board or plywood, you can take a thick cardboard. And the recommendations themselves are presented above. In the fabric you need to make holes for the tubes, pulling and securing everything with a furniture stapler. The pipes are covered with twine, and the principle described above can be used.