Four-roof and profiled. How to fix this material on the roof?

Modern building technologies can offer dozens of options for erecting roofs, choosing from which suitable is not easy. Everyone wants that the roof was not only as cheap as possible, but also high-quality. In the classical version, the roofs are subdivided according to the number of skates on them.

Objects of industry and the national economy are often equipped with simple flat roofs. This circumstance is easily explained by the fact that in the case of such a configuration it is easy to stack the same cheap corrugated board. How to attach this material to the roof? We will talk about this today!

Of course, that all roofs have not only positive, but also negative qualities. By the number of advantages in many respects the four-pitched roof is in the lead . Under it you can create a spacious attic space, providing excellent insulation of your house, and also afterwards having every chance to be converted into an excellent attic. Given its strength characteristics, you can use not only an easy and cheap corrugated board (how to fix it on the roof, we'll talk later), but even natural tiles.

The use of this roof is good at least in that the basis of the entire construction is a triangle. This structure is known for its stability and excellent strength characteristics. If each face of such a triangle is equal to the other, then the roof structure is called a "tent". On materials (due to the small area of each face) can be saved, but it is necessary to pay close attention to the high quality of calculation of the required number of them.

Note that the specific shape of the roof can create some problems for those who will cut the corrugated board: how to fix the strip of material on the roof, which was mistakenly given the wrong shape?

First you need to decide on the hardware. Many mistakenly believe that for this purpose, fine nails are perfect, but such a judgment is a gross error. The fact is that they tear metal under the influence of strong wind, mechanical pressure of snow and ice, which is not the best way affects the condition of the roof. So we strongly recommend using only special rubber-lined screws.

When building a hipped roof, the rafter system is laid on the Mauerlat. In the case of a wooden structure, the upper ring serves as a fulcrum. For brick buildings it is necessary to use a strapping bar. Using the ridge run, the upper part of the roof is securely fastened. Knowing these features, you must strictly maintain the shape of the crate. Given the steepness of the entire structure, we use its step of 30-50 cm. Before fixing the corrugated board on the roof, carefully check all the tools and insurance. Start the installation only at the end.

Screws are screwed strictly perpendicular to the surface of the material, and only concave areas can be used for the fixing point. Any inaccuracy over time will lead to the fact that they will break out of their fastenings. One square meter should be used at least seven screws (again, remember the steepness of the roof). Please note that you only need to overlap the sheets of material overlapping, and its width should be at least one or two waves. Approximately and put profiled. How to mount it on the roof, we told.

In conclusion, we should devote some time to the merits of this material. So, its cheapness gives a chance to save a lot on construction, and high durability will save you from the need for permanent repairs. Considering the wide color palette used by manufacturers, it is possible to make so that any roof made of corrugated board (photo of which is in the article) will become a real work of art!