What does the machinist of process pumps do?

The machinist of technological pumps is a very important and necessary profession. All the features of this work will be described in this article.

Who is a machinist of process pumps?

Specialist, which will be discussed in this article, is engaged in servicing special equipment for pipelines. It does not matter what pipelines can be : main or vapor, designed for liquid substances or for gaseous ones. In order for certain substances to circulate, it is necessary to maintain, repair and constantly check the available equipment. This is what the representative of the profession in question is doing.

And what about the relevance of the profession? Since the majority of enterprises in the CIS countries work with internal communications operating under certain pressure, the work of the machinist of process pumps will remain in demand and needed in the labor market for a long time.

About professional duties

The machinist of technological pumps, like any other employee, has many duties, functions and functions. Here are the most basic of those that can be called:

• Timely repair of compressor station elements , elimination of problems and malfunctions.
• Ensuring the optimal transport of substances through the pipeline.
• Inspection and repair of pump units.
• Working with pumping units is their adjustment.
• Preparation of liquid fuel for transportation.
• Working with liquid substances - their draining and pumping.
• Work with reports.
• Carrying out of technical inspection according to the plan.
• Adjustment of pressure in pipelines.

Of course, he has a machinist of technological pumps and many other functions. But it depends on the discharge of a specialist.

Necessary for work education

The representative of the profession in question, of course, could not work without proper education. Practically anyone who wishes today can enroll in a college or technical school with a degree in "Technician of pumps and compressors". And what are the necessary knowledge and skills to work in this specialty? Here are just some of the things an employee should know:

• Principle of operation and automation device.
• Features of the design of compressor equipment.
• Setting up the equipment.
• Actions during accidents.
• Start of transportation through pipelines.
• The design of stop valves.
• Pressure adjustment.
• Protective aggregates are their device.
• Use of control devices, the basis of their operation.

Above are just a few points that will need to be learned during training. It is also worth noting that in the college or technical school will have to learn the following subjects:

• Materials Science;
• drawing;
• BDZ;
• Electrical engineering;
• Technical mechanics;
• Basis of transportation of substances and some others.

Thus, it will not be possible to occupy simply a workplace in the specialty of "machinist of technological pumps". Training is the necessary and most important component of the profession.

About the relevance of the profession

Young people who graduated from an educational institution in the required specialty are unlikely to get into a difficult situation with a job search. The profession of "machinist of technological pumps" is very in demand today. Those wishing to work on the specialty in question will easily find the optimal workplace. After all, practically any enterprise that has and operates pipelines needs competent, educated specialists.

It is worth noting that the profession in question does not suit everyone. It is unlikely that physically weak, weak people will feel comfortable and confident in the workplace. After all, the work in question is truly masculine, somewhat difficult and difficult. But it is compensated by all the excellent opportunities for career growth and good wages.

About the second level according to the job description

Second-class workers are, as a rule, newcomers who are just beginning to master all the subtleties of the profession. What are the duties of such specialists?

The second-class worker is obliged to serve the pumping stations, as well as the facilities that pump or prepare oil. Preparation of schemes for technological strapping, elimination of leakage of products (under the guidance of a worker with a rank above) - all this also falls within the competence of the worker. It is necessary, among other things, to constantly monitor the operation of pumps, cooling systems, lubrication, ventilation, etc. The control of the serviceability of various valves, measuring devices, pipelines also falls on the specialist of the second level.

It is worth mentioning and some other functions, namely:

• Selection of specific samples;
• Check valves, as well as their closing and opening;
• Wiping, starting and stopping of pumping units;
• Change of gaskets.

Naturally, not all the functions of a second-class worker were mentioned above. After all, the duties and their number depend on the enterprise in which the professional activity is carried out.

About the third category according to job description

The worker with the third class is obliged to make permanent inspections of pumping stations, to service them (it is a question of stations pumping and preparing oil products with a capacity of 500 cubic meters per hour). This includes the inspection and repair of electric motors (from 500 kW), as well as maintenance of technological pumping units (no more than 1000 cubic m / h).

However, this is not all the duties. The instruction of the machinist of technological pumps prescribes for the specialist of the third category the following functions:

• Observation of the load of electric motors, pressure in pipes and pumps, lubrication systems, ventilation and cooling systems, etc. All observations are made using instrumentation.
• Work with electric motors: start and stop them.
• Check the proper amount of lubrication in certain appliances.
• Checking the operating mode of equipment.

About the fourth grade by job description

What functions are assigned to the representative of the fourth category by the job description? What duties does the machinist of process pumps have? The watch the worker takes with the fourth digit looks like this: the specialist keeps all the necessary entries in the journal. Further care is taken for the following sites:

Actuators of contactors of alkylation plants;

• Pumping stations (from 500 to 1 thousand cubic meters per hour);
• Pumping technological installations (productivity - from 1 thousand to 3 thousand cubic meters per hour);
• Areas with pump electric motors (power from 500 to 3 thousand kW).

In addition, the specialist is required to monitor the necessary pressure on pumping out. Control over transformer substations (under the direction of a worker with a rank above) is also the responsibility of a specialist with a fourth rank.

Depending on the place where the expert works, the functions may vary slightly.

About the fifth category according to job description

The machinist of technological pumps of the fifth category is obliged to perform the following functions:

• Service control panels;
• Control and maintain sections with transformer substations;
• Service pumps and electric motors (no more than 3 thousand kW);
• Service pumping stations for the preparation and production of oil products, with a capacity of 1 thousand to 3 thousand cubic meters. M / h;
• Servicing oil processing plants, with a capacity of at least 3 thousand cubic meters. M / h.

Among other things, the worker with the fifth level is obliged to observe the rules of labor safety, competently organize the workplace, provide first aid, etc.

About the sixth grade by job description

What is the duty of the worker who has the sixth rank to do? What are its functions? We can distinguish the following points with which the specialist in question is dealing:

• Starting and stopping of existing pumping station equipment; Check the operating mode of this station.
• Detection and elimination of various malfunctions in the operation of technical pumping stations.
• Repair and inspection of pumping stations (with a capacity of 3 thousand cubic meters per hour).

It is also worth adding that a specialist with the sixth level already has the right (or rather the duty) to manage workers with lower qualifications. There are a lot of tasks here: control over the work, training of workers in certain skills, etc. Again, the number of duties will depend only on production.

About the seventh grade by job description

The worker, who has the seventh rank, is endowed with the following functions and duties:

• Adjustment and testing of pumping station modes;
• Selection of necessary modes at pumping stations;
• Maintenance of various pump pipelines, units, electric motors;
• Work on the management of pumping stations, pumping and preparing oil products (capacity from 3,500 cubic meters per hour);
• Carrying out various kinds of operations for the detection and elimination of malfunctions in the operation of pumping plants.

In addition to all the above, the machinist of technological pumps with the seventh category is obliged to work with the documentation. Drawing up plans for testing, checking and repairing pumping equipment is also a part of the employee's responsibility. Plans are also being made to develop operations to improve service, to increase the operation of various devices. Also, a specialist with the seventh level is required to manage employees with lower qualifications. Here everything will depend directly on the enterprise: in the competence of the employee with the highest level will be only those functions that the superiors will endow.

Pros and cons of the profession

As in any other profession, there are enough advantages and disadvantages in the work of the specialist in question. What are the advantages of the profession of a machinist of process pumps?

• Salary . Of course, the level of income will depend on the existing level. The higher the qualification - the more earnings. However, it is worth noting that the specialist in question, even if he has a second class, receives very good money.
• The possibility of rapid career growth. As already mentioned, there are as many as seven categories in the profession. With due efforts, you can easily raise your qualifications.

But there is a disadvantage in this profession. Among them we can distinguish:

• Problems with employment. The workplace can not be obtained immediately. This is what you should pay attention to before entering the specialty of "machinist of technological pumps". Jobs, unfortunately, there is not everywhere.
• High responsibility. The functions and responsibilities of the workers really a lot. Almost every machinist of technological pumps will agree with this. The training of the profession will nevertheless help to fully master and obtain all the necessary knowledge and skills.