Wall panel for brick for interior decoration. External wall panels for brick

Natural materials were originally at the height of popularity. However, their cost is not always available to the average consumer. Proceeding from this, manufacturers began to make artificial analogs, which in appearance do not differ from their prototypes. A vivid example of this policy was the wall panel for brick. What it is? Rectangular design with applied decorative ornamentation, which believably simulates the classic masonry.

Such material has the main advantage - an affordable price, but this is not all its merits. A wide choice of color design, a relief texture, a variety of shapes makes it at the moment the most in demand. It is worth noting that the wall panels for brick (photo see in the article) is easy to install. It can be used as a finishing material on almost any surface, since the weight of the product is rather small. And this allows us to significantly expand the scope of its application.

Types of panels

This product is made of different materials, depending on which it can be divided into two types:

1. PVC panels. During their production, polyvinyl chloride (modern artificial material) and softeners are used. As a rule, in the initial stages of the panel are white. First, the product is given a texture pattern corresponding to the brickwork, after that it is painted using a special technology.
2. MDF panels are brick-walled for quality from the first type. They are much stronger and more reliable. Are made of wood shavings, pressed under high pressure. Due to the influence of high temperatures the material acquires excellent technical characteristics.

As a rule, such panels eventually have a rectangular shape, their area is 3-8 square meters. M. The material is cut easily enough with the help of a hacksaw for metal or a jigsaw.

Features of MDF panels

If we compare artificial materials, then MDF is considered the most qualitative. It is often made of external wall panels for brick. It is resistant to sharp temperature changes, high humidity, strong enough, not afraid of mechanical damage. It is these qualities that make it possible to use it for facing facades and balconies. However, this does not mean that such panels can not be used indoors. This option is most suitable for finishing the kitchen, hallway and even a bathroom.

Thanks to the bright print in the form of brickwork, you can make a contrast accent. Wall panels are perfectly combined with other types of finishing materials, for example, decorative plaster, wallpaper, paint. Installation is quick and easy, during the installation they can completely avoid the formation of dust and dirt.

Features of PVC panels

Polyvinyl chloride has excellent technical characteristics. First of all, it is sound and heat insulation properties. By covering the walls with such material, you can forget about extraneous sounds coming from the street. PVC panels do not respond to fluctuations in temperature, which will allow them to be used for exterior finishing. They do not change appearance under the influence of direct sunlight. Experts argue that polyvinyl chloride is not harmful to human health, so recently it has become widely used such a wall panel for brick for interior decoration. Caring for its surface is easy enough, it is washed with any non-alkaline means. Thanks to this many people use PVC panels in the kitchen, where dirt and grease constantly accumulate.

The huge choice of color design allows you to significantly transform the interior of the premises.

Advantages of wall panels

Studying this material, you can not keep silent about its merits.

1. First of all, this is installation. Such work can be done independently without special knowledge and skills. It's enough just to study the technology and start boldly to work.
2. Wall panel for a brick of small weight, so it is lined with any foundation.
3. Fastening does not require additional work on the preparation of the surface and its alignment, allowing you to save a significant amount.
4. Long service life (more than 10 years). During the entire period of use, cracks, chips and other defects do not appear on the front side of the panels. Also, you do not need to update the appearance systematically.
5. Versatility. Ideally fit into any interior, and can be used for exterior and interior cladding.
6. Partial reconstruction allows, without touching the main surface, to replace the unusable sheets.

Consider the shortcomings of wall panels

Immediately it is worth noting that the wall panels for brick have practically no minuses. And those that are, are much inferior to dignity.

So, what are the disadvantages of wall panels?

1. Low level of fire resistance. In no case is it advisable to expose this material to heat treatment, especially with open fire.
2. If possible, very severe damage can be avoided, sometimes typical dents may form, especially for PVC panels.

Application area

As already mentioned above, the wall panel for brick can be used for both internal and external decoration. This material is great for facing unglazed balconies or loggias, as well as arbors or terraces. The panels look fairly organic on the facades of buildings, and not necessarily residential ones. They are often used for administrative and economic structures.

Naturally, this product looks great on the walls. Thanks to the original design, they are used in interiors decorated in different stylistic directions. But this is where their field of application does not end. Light weight allows the use of panels for the decoration of ceilings, making unusual compositions.

Cost of wall panels

The formation of prices affects several factors:

1. The material from which the wall panel is made for brick, for example, MDF will be much more expensive than polyvinyl chloride.
2. Manufacturer. Well-known brands, as a rule, overestimate the cost due to the promotion of brands.
3. Specifications. In the same samples, the price may vary depending on the thickness of the sheet.
4. Drawing of an ornament, in particular, color registration and complexity of drawing.
5. The quality of the paints used to decorate the front part.

For comparison, we offer several options for quoting wall panels:

• The production of Russia is 780 rubles, the thickness is 4 mm.
• The production of Malaysia - 400 rubles per 1 square. meter.
• The US production is a sheet of 3 square meters. M with a thickness of 6 mm will cost about 2000 rubles.