"Panels-Yassya" from "Tikkurila": features and scope of paintwork materials

LKM "Panels-Yassia" from "Tikkurila" is a water-based varnish of acrylate type, suitable for interior finishing works. A special feature of this coating is durable protection of the painted surface, which is achieved due to UV-titanium dioxide - inorganic protective component contained in the composition. It is he who is responsible for the effective filtration of negative ultraviolet radiation from the sun.

LMC for light wood

Lacquer "Tikkurila Panels-Yassya Titan" is suitable for processing wood species of light shades, such as: birch, oak, maple, ash, beech. After drying, the surface acquires a semi-matt color with a slightly whitish shade, illuminating the original natural tone of the material.

Reliable protection against darkening

Wood is subject to the influence of external negative factors, which is reflected in its appearance. "Panels-Yassia" from "Tikkurila" will provide reliable protection of color and purity of wood from fungi, darkening and mold. Using such a primer, you can preserve the beauty of wooden products for a long time, and coloring does not give you trouble. Now, no moisture, no fungi, no sunshine is terrible for your home.

Work with the varnish "Tikkurila"

Using LMB "Panels-Yassia" from "Tikkurila", you can process any log surface, panel walls or ceiling. The product can be applied with a brush or by spraying. Sometimes there is a need to create a multi-layer coating. In this case, the next layer is applied after drying the first - a few hours.

Features of the application of the varnish "Panels-Yassia"

This tool is suitable for varnishing ceilings and walls of light wood. After the drying of the coating "Panels-Yassia" from "Tikkurila" does not darken, keeping freshness.

Important! Do not use the material outside the intended purpose, for example, for finishing surfaces from dark wood. This negatively affects their external data.

Instructions for use

Before you start painting, make sure that the surface you are working on is dry. The temperature of the air indoors or outdoors should not be below +10 degrees Celsius, and the humidity of air should be 35-80%.

Work with a new, not yet painted surface

The area under painting is pre-cleaned. Humidify so that the wood fibers are raised. Allow to dry and sand. Remains of dust and dirt are removed at the final stage of the treatment.

Repeated painting

The surface is washed with a special alkaline agent, then thoroughly rinsed with water. Residues of lacquer are removed by means of a means for removing the paint or by grinding. Further preparation is performed as for a new surface, as described above. There is nothing difficult in this, therefore, even a beginner will master this task.

Surface restoration

During the coloring and before the start of work, the paint is thoroughly mixed with a wooden stick. This will ensure uniform mixing of the pigment component and the matting concentrate. The paint is diluted with water, if necessary, and applied in two layers in the direction of the wood fibers.

Varnish the surface at a fast pace, working with the material "Tikkurila Panels-Yassya." Feedback from masters using this brand of products confirm that such application technology allows avoiding noticeable joints and divorces on the surface.

Applying the second layer proceeds after drying out the first and its easy grinding.

After work, all tools are cleaned and washed with water or a special solution of "Pensselipesu".

How to care for a painted surface

If there is such a need, the coated surface after about 4 weeks is cleaned with a neutral detergent solution, using a wrung out soft cloth or sponge. In any case, do not leave the lacquered surface wet. Wash immediately after washing. For too contaminated areas, weak alkaline agents can be used.

As you can see, it's easy to work with such material as "Tikkurila Panels-Yassya". The price for the material ranges from 600 to 6000 rubles, depending on the volume. But, believe me, it's worth it. After all, varnish, which has high technical characteristics, will provide reliable protection for your wooden products and coatings. Once processed, they will serve for many years without requiring renovation or restoration, which, notice, is very beneficial.