Aerator for water - water saving

The water aerator is a small device, represented as a mesh filter.

Need to use

This design should be fixed on the mixer spout, it is intended for mixing the flow of water with air masses. This approach allows you to limit the intensity of the flow, while for the user it will remain invisible. Many home wizards make the dismantling of the described device, believing that this device is an analog of a coarse filter. Even if a good water filter is installed in the house, you should not abandon the use of an aerator that can limit the passage of water. It is worth considering that, in addition to saving, with the help of an aerator you can achieve purification of water from salts and sand particles.

Functions of water economizer

If you decide to purchase a water aerator, then, first of all, you need to get acquainted with the main purpose of this design and its device. On the perimeter of the device are small holes, through which air enters into the mix for mixing with water. From the central part of the device as a result of this comes out water, which is saturated with air bubbles. The main purpose of the aerator is the normalization of the flow.

How to determine the correct operation of the device

In order to understand if the aerator for water works correctly, you should pay attention to the jet, which should have a milky shade, differ in softness and foaming. After the jet hits the object, there is not a huge amount of splashes that could scatter in different directions. The object is under the flow. According to the hostess, it is very convenient for washing kitchen utensils and dishes. At the same time, the flow of water is sufficient to free the surface of objects from washing-up liquids. The aerator for water saturates the flow with oxygen, this facilitates the weathering of chlorine compounds. With the help of this device, water quality can be improved. Aeration helps to increase the volume of the jet at the expense of air, thanks to the mixing of bubbles, but the pressure is unchanged, while the water flow is significantly reduced. Thus, without an aerator, the flow from the tap can reach 15 liters per minute, the nozzle can reduce it by a factor of 2.

Additional benefits

The mixer aerator for water saving is very popular among consumers today. If we consider its additional advantages, we can distinguish a lower noise level when using a water tap, since water mixed with air is not noisy. In the store, such a device can be purchased for an affordable price, which can vary from 2 to 10 dollars. Each user can perform not only installation, but also the dismantling of the device, this also concerns the maintenance, which is simple. The main advantage is the possibility of saving water, which is important for modern owners of meters.

For reference

The nozzle-aerator of water has one drawback, which is expressed in the fragility of the device. Thus, after purchase, the device requires replacement once a year, if the water pipe system is based on old pipes, then the purchase of a new device will have to be done once in six months. It is important to remember that the aerator not only creates a highly effective jet, but also helps to reduce the flow, increasing the quality of water. This indicates that the consumer will be interested in not having to remove the device, but to monitor the proper operation of the device. Thus, maintenance will involve periodic cleaning and replacement of the filter.

Aerator device

If you decide to install a water economizer - an aerator, you should first familiarize yourself with its device. The structure has a housing, silicone or rubber gasket, as well as a module with a filter system, which is made of plastic. The meshes with cells are stacked one on top of the other in a cylindrical module. The first and second grids are designed to direct the water jet, cleaning, as for the rest, they are necessary to mix air into the water.

Material for making aerator

Before you buy a water aerator on the tap, it is recommended that you familiarize yourself with the material that can form the basis of the design. If we are talking about metal, then you can count on the most inexpensive devices. For this reason they are the most popular. In the role of shortage is the rapid destruction of the product from the effects of impurities and water. Among other things, the device will be corroded during operation, and you may encounter rust, which sometimes leads to holes. The basis of the device can lie polymer material, in the role of its advantages can be distinguished excellent quality and affordable cost. The material is excellent under the damaging effect of water. On sale you can find products of different designs, which can be tunneled and the simplest, represented in the form of dividers. The aerator on the tap for saving water can be made of non-ferrous metals such as bronze or brass, as well as ceramics. Such devices are the most expensive, however you can count on high quality and long service life.

Varieties of modern water economists

Visiting the store, you can see the aerators in a large assortment, modern ones have very original design features and have unique functions. If we are talking about vacuum devices, then they work on the principle of water compression with the help of a vacuum valve. At the same time, high pressure is applied to the flow, and this is the way to ensure aeration. In the end, the user gets a powerful jet at the output, as well as a small water flow, which can be only 1, 1 liter per minute. Quite often, in recent years, modern consumers have installed water aerators for mixers, they can be swivel or adjustable. With the help of such a device, you will have the opportunity to change the flow strength, using one of two modes, namely spray or jet.

If you want to diversify the interior of the kitchen, you can choose an aerator with a backlight that will color the stream depending on the temperature in different shades. Thus, if the temperature does not reach 29 degrees, the color of the water will be green, if the temperature rises to 30-38 degrees, the water will be painted blue. The flow will be red if the temperature rises above 39 degrees. It is important to take into account that such backlit devices do not presuppose the necessity of using electric power sources, since they work due to the rotation of their turbine. Connect the device to the tap, setting it as a normal economizer, but you do not need to use additional tools; you'll have to screw it in manually. It is possible not only to illuminate the flow, but also to maintain a certain temperature. For this, a mixer with a thermostat is used.

Service Recommendations

Aerators for water, reviews about which are the most positive, will perform its functions qualitatively, if it is technically sound. Under the influence of water, the nets are covered with elements of salts, iron oxide and other particles. In the end, this results in the device ceasing to function properly. If this happens, you will see that the water pressure will be weak, the hissing sound of the flow will disappear.

To clean the aerator, you need to dismount it by using a locksmith or pliers. On the head of the device there are two faces, which are opposite. The aerator needs to be seized with a key behind the edges, turning clockwise. Sometimes it is possible to remove the aerator manually, but if you have not made the treatment for a long time, then this can be difficult. Rubber gasket must be removed and evaluated its condition. Seized filters must be cleaned with a needle or a thin silk. If parts and holes form indelible deposits, then a chemical cleaning method can be used. He is in many cases the only true.