Tuning of the salon VAZ-2109. VAZ-2109: tuning by own hands (photo)

Tuning salon VAZ-2109 is a process that interests almost every owner of such a car. At its performance it is possible to achieve improvement of salon characteristics and its appearance. The main task of this process is to improve the acoustic characteristics of the speaker system. Although it's not a secret for anyone that tuning the VAZ-2109 interior is simultaneous execution of noise insulation, thermal insulation and improvement of its appearance.

Why do I need soundproofing?

Owners of many cars do not think about the need for sound insulation, because the car goes well without it. And they perform this procedure for several reasons:

• Tired of extraneous noise, which interfere with the normal ride on your car. In the process of assembling the machine, a huge amount of plastic parts were used, which creak. And this sound is sometimes so strong that drivers discard all thoughts about installing expensive acoustics. After the procedure it will be possible to install any acoustic system that will sound good in the VAZ-2109. Tuning the salon will make pastime in the car more interesting.
• Everything creaks, from the door to the trunk. The instrument panel emits some strange sounds that irritate absolutely every owner of VAZ. The trunk shelf does the same, but only at the rear of the car.
• It seems that all the objects located in the salon, live their lives. And here there is no place for a smooth and melodic sound, which is produced by an acoustic system.

What do you need to buy for soundproofing?

In domestic cars, it's no secret that there is not a proper level of acoustic system. And a vivid confirmation of this is the model VAZ-2109. Tuning salon allows you to achieve high-quality sound acoustics. During driving on this car, all kinds of noise are noticeable, which makes the trip uncomfortable and very noisy. Therefore, the most important and necessary thing to do first of all when tuning the car VAZ 2109, is to conduct noise insulation. A set of tools and materials is needed to properly install the soundproofing. You will need: a sharpened knife, a roller, a heat gun, a marker of any color, scissors and a tape measure, a spatula, acetone.

How does the process occur?

Many are interested in how the tuning of VAZ-2109 is carried out (photo). Tuning 2109 with their own hands is not easy. After all, the creation of sound insulation is a very important process, which needs to be given due attention. If there is no money for it to be carried out in a car repair service, then it can be reproduced quite realistically and independently. It should be noted that the work is carried out in three steps:

• The initial stage: the choice of material. It is better to give preference to the vibration plate M2 and noise insulation "Stizol". Begin the installation of sound insulation is necessary from the disassembly of the car. If you have never done this, it is best to entrust this process to a competent specialist. In any car service it is able to do every employee.
• Preparing the machine. To disassemble the car, it is necessary to remove from all the seats, dismantle the door panels, and also remove the upholstery material from the ceiling, the instrument panel and the floor covering.
• Installation. In order to apply the material, it is necessary to degrease the surface of the body from all kinds of dirt with a solvent of 646 or acetone and stand for 10 minutes. If necessary, this period can be increased. Many experts and automotive experts say that the noise insulation of the VAZ-2109 interior will not be of high quality without the use of a porous material. Its peculiarity lies in the fact that the air contained in the pores blocks and muffles the noise well and also delays heat. The price of the material is available for every motorist.

Performing soundproofing yourself

You can make tuning of the VAZ-2109 salon with your own hands. This process is as follows:

• The inside of the door is recommended to be glued with a vibration shroud. For this purpose, it must be pressed tightly using a roller. For ease of installation, vibration-absorbing materials should be heated to 50 degrees. For this, it is recommended to use a conventional hairdryer. If there is a building hair dryer, the result will be even better, since heating will happen much faster.
• It is necessary to start the material from the central part to the edges so that bubbles do not form. Although at normal room temperature it sticks well. Some vibromaterials have on one side an adhesive surface, which facilitates the installation process.
• The next step is pasting all the remaining space in the car. The technique of execution should be the joint in the joint. Only after this, it is possible to carry out measures to apply the selected noise insulation material. It must necessarily go over the vibroplate. Do not forget that the material is applied by the adhesive side to the surface.
• After doing these simple enough actions, namely after you have glued absolutely all the inside of the machine, the removed parts and parts are put in their places.

Performance of thermal insulation

As already noted above, the tuning of the VAZ-2109 interior includes thermal insulation. It should be noted that this process can not be called very simple. After all, it may take several days to implement it. First of all, it is necessary to determine the scale of the work. Naturally, the more it will be, the more efforts will have to be made. After all, you can conduct insulation only doors or the entire car. So, let's go:

• To begin with, you need to completely disassemble the interior of the machine. That is, you should remove all unnecessary items. They include armchairs, mirrors, torpedo, lining. You can also upgrade the stove by adjusting the flaps. Therefore, at this stage it is better to remove it.
• Now pay special attention to the plugs that close the holes in the bottom of the cabin. If some of them have already worn out, they should be replaced (in extreme cases, make it more sealed using a mounting foam). If you miss this moment, you can not avoid getting moisture in the car's interior.

Processing of plastic parts

From the processing of metal parts, you need to slowly go to the pasting of plastic elements. To do this, it is better to use a visopharm, since it is much easier to install than a vibroplast. Places where the parts come into contact with each other should be sealed with a bitoplast. This is to ensure that the glued parts do not creak and do not emit any extraneous sounds. Plastic parts need to be glued, starting with the trunk. To do this, they should be removed, and then dismantle and lining.

Next, we must begin processing the instrument panel VAZ-2109. The tuning of the salon and panels, photos and video of which are also useful, takes place according to a certain scheme. The torpedo is covered with foam. Visible slots need to be sealed with a bitoplasty. Particular attention should be paid to the slots located between the stove and ducts. The combination of instruments is to be machined and visor. To do this, you need to use a vizomat.

Roofing

The tuning of the VAZ-2109 interior includes work with a roof. It must be taken into account that it is not the entire ceiling of the machine that needs to be isolated, but only the gaps between the cross-arms. Vibroplast is cut into pieces, which must be glued in the appropriate way. Splice is used for the second layer. To be easy to install, it is necessary to heat it a little, and then - to fix it with the help of double-sided scotch tape.

Replacing the new steering wheel with a new one

Many owners of domestic cars are interested in how the tuning of VAZ-2109 is going on (photo). Tuning 2109 with their own hands can be done. It should be borne in mind that tuning is a complex of actions that contribute to the modernization of the machine. Therefore, you need to make it look more attractive. Many even decide to replace the steering wheel, which in use loses its original characteristics. To perform this process it is necessary to ensure the immovability of the handlebars. Under it there must be a lid, which must be removed. There will be plugs, they should also be disconnected. Unscrew the bolt that secures the steering wheel (it is usually on the left). To dismantle, you need to pull it on yourself. Installation of the new steering wheel is in the reverse order.

Upholstery

Upgrading and tuning the VAZ-2109 is also very important. Sometimes the old upholstery of the salon is cracking, and it looks simply awful. Therefore, many decide to do the upholstery of the seats. To do this, you can use any material that has a dense texture. They should also pull the ceiling and the hatch, so as not to disturb the style of the car.

Thus, you can perform car tuning yourself. To do this, it is recommended to purchase a special kit, consisting of all necessary details.