The size of the plastic panel. Plastic panels: sizes, prices, photos

Despite a wide variety of finishing materials, plastic panels are very popular when decorating rooms. They have different parameters and appearance. Technical characteristics of any kind of this material are similar, as are the methods of its installation.

Raw materials for the manufacture of plastic panels

This material is made of a dense plastic. It's called differently polyvinyl chloride. Has excellent performance and performance.

Varieties of plastic panels by the way of application

To date, there are different plastic panels. Dimensions and prices also differ. It all depends on the kind of material. So, PVC panels can be:

• Walled;
• Ceiling.

Some of the types of this material can be universal.

There are also some differences. There are such wall plastic panels by the method of closing the surface:

• Supporting;
• High.

Ceiling panels can only be basic. They are also used for decorating walls.

Dimensions of plastic panels for walls, which are used in the main interior decoration, are:

• Length - 2,5-3 m;
• Width - 1-1,5 m;
• Thickness - 0,8-1 cm.

Support plastic panels have these parameters:

• Width - 1-1,5-2 m;
• Length - 1-1,3 m.

It should be noted that the dimensions of the plastic panels for the ceiling are different from the wall ones. They have a length of 2.5 and up to 4 m. The width reaches 10-50 cm. The most common parameters in the design of the ceiling surface are panels with a width of 25 cm and a length of 4 m.

Types of PVC panels

The size of the plastic panel depends on its type. There are several ways of making the material. He can be:

• In the form of strips - plastic lining;
• Sheet;
• In the form of plastic tiles.

Surface of plastic panels

To date, the design of PVC panels can be any. They can be and only one shade and have a variety of interesting drawings. The surface itself is also different. It:

• Matte or glossy;
• Structured or smooth.

Technical characteristics of PVC panels

Plastic panels have excellent properties. It is for this reason that they have been used in finishing the premises for a long time. Immediately the scope of the material was the kitchen area. Ceiling surfaces were made with plastic lining. Over time, the lining began to be mounted on the wall. There was a wide range of its sizes and shades.

Advantages of plastic lining:

• Moisture resistant;
• Practical;
• Easy to install;
• Long-lived;
• Wear-resistant.

Also worth noting is the fire resistance of the material and its inability to be exposed to temperature changes. All this is due to the dense structure of the plastic. He has no pores.

Due to the fact that the main advantage of plastic panels is moisture resistance, they can be installed in a room with high humidity. Only here there are certain rules, according to which the preparation of the surface and the internal insulation of the premises are carried out.

The practicality of plastic is due to the ease of care. Since the material is not capable of absorbing contaminants, its surface is easily cleaned with a simple damp rag. For some surfaces, you can use cleaning and detergents.

Important. Do not use abrasive agents that can damage the glossy plastic panels.

The service life of the panels reaches 80 years. Everything depends on the manufacturer of the material and on the quality of the products. For this reason it is better to purchase plastic for interior finishing only from trusted sellers. It should be noted that throughout the life of the product and with proper care, PVC panels do not change their exterior design. The surface does not burn out in the sun, which makes it possible to use them in finishing the facade of any structure. For this, certain panel parameters are selected.

Also the material has a simple installation. Works can be performed independently.

Dimensions of plastic panels in the form of lining

This type of material is most often used in interior decoration. It can be mounted on a special crate. The very process of the work is quite simple. It is caused by the parameters of the material.

The size of the plastic panel in the form of strips, which have a hollow structure, with certain ribs of stiffness, can be any.

Panel width:

• 10 cm;
• 25 cm;
• 30 cm.

Length of material:

• 300 cm;
• 450 cm;
• 600 cm.

Panel thickness:

• 0.5 cm;
• 0.6 cm;
• 0.8 cm;
• 1 cm.

Important. Most often chosen are the dimensions of plastic panels for a bathroom or a bathroom: length - 300 cm, width - 25 cm, thickness 8 cm.

Plastic lining can be standard type and euro. These materials differ only in their size. The structure and production are the same. European standards are panels that are large and have a certain number of ribs in the hollow structure.

Note. The size of the plastic panel of the European standard in width reaches 50 cm, and in length - 5,5-6 m.

Dimensions of PVC sheets

In the design of premises such as a living room, bedroom, kitchen area and so on, a plastic panel (PVC) is used. Its dimensions can be:

• Length - 1,5-4,05 m;
• Width - 0,8-2,03 m;
• Thickness - 0,1-3 cm.

Dimensions of plastic plates

Not less often in the design are applied PVC panels in the form of tiles. They can be mounted both on the wall surface and on the ceiling.

The size of the plastic panel:

• 30x30 cm;
• 98x98 cm.

Depending on the size of the material, the methods of its installation are chosen.

Cost of material

Immediately it is worth noting that the cost of plastic panels depends not only on their size. A great role is played by the name of the manufacturer. The more popular it is in the construction market, the more expensive the material will be.

Also the big role is played also by the size of PVC-panels. For example, the cost of plastic lining is set for 1 square. M. But the sale of sheet panels is possible and one by one. Plate in the form of plates is also estimated per square meter.

To date, the average cost of plastic lining is 1-5 dollars. USA. For sheet material are set other prices - 10-60 dollars. USA per sheet. Plastic plates can have rates that range from 8 to 15 dollars. The US for 1 square. M.

How to choose the right size?

Initially, when selecting PVC panels, the room parameters are taken into account. For example, for wall finishing, which have a height of 2.75 m, it would be more logical to choose panels in length of 3 or 4 m. You can give preference to plastic slabs.

So, for example, the ceiling width is 3 m. Accordingly, the choice of plastic panels can be based either on sheet material or on a lining. The sheets should be 1.5 m wide and the lining - 30 cm. This will make it possible to completely cover the surface and at the same time to have a minimum of waste.

Types of fastening plastic panels on any surface

For today there are two ways of fastening plastic panels on a surface:

• On the crate:
• On the glue.

For example, the installation of plastic lining or sheet PVC panels can be carried out only on the frame. This is due to the large size of the material. They need to be securely fixed on the crate.

The frame itself is made of wood or metal profiles. Its height depends on the unevenness of the surface. On the structure of the frame plastic panels can be attached with self-tapping screws or staples of the construction stapler.

On the glue in most cases fix only plastic panels in the form of plates. Preliminary surface is prepared: leveled, cleaned and processed by special means. The panels are glued tightly.

You can glue to the surface and other types of plastic panels, which are large. Only in this case it is worth initially priming the surface with a glue solution to ensure its adhesion to the material.