"The killer of the crucian carp" with your own hands. Tool for crucian carp

Tackle the "crucian carver" - the ideal solution for fishing at any time of the year. In addition, it is suitable for fishing for spinning or a conventional fishing rod. In the summer season, when the crucian is full, fishing will be the most spectacular on the feeder rod with the rigging of the "crucian carver". Such tackle of different manufacturers can be found in fishing shops, and you can do it yourself.

Using the rigging of the "crucian carver"

Catching the crucian carp on the "killer of the crucian carp" is possible on small reservoirs, as well as on deep water reservoirs. In this case, both a lightweight picker and a heavy feeder are used. The line should be used wicker, because it accurately conveys the bite and does not stretch. Leashes should be short to stay near the feeder. Tackle "carp killer" is attached to the main line with a small carabiner.

As a bait, as a rule, a large piece of foam is used, so that the crucian can not swallow the hook. In addition, this material raises the hook from the bottom. To tackle the "killer of the crucian carp" several hooks are hooked at once, due to which the probability of catch significantly increases. As a bait can be used dough or mastyrka. To ensure that the bait is not blurred and does not scatter during the impact of water, it should be filled as tightly as possible.

Advantages of self-made tackle

Many fishermen believe that the crucian is a rather stupid fish, as a result of which they return home without a catch. Therefore, without special gear can not do. In this case, branded tackle, as a rule, have certain drawbacks. Among them, it should be noted that the hook is tied tightly, or it is difficult to quickly change the sinker.

Therefore, the tackle "carp killer", made with his own hands, can solve many problems. At a minimum, it is possible to make the necessary number of feeders and hooks, as well as catch immediately into several types of bait and bait.

Thanks to homemade tackle, you can change the sink at any time, depending on the depth of the pond, the strength of the wind and the current. However, the main advantage of such a tool is a high level of sensitivity. Therefore, self-intersection occurs at the time when the stock of the line goes to the bead located above the hook attachment, and before that, when biting, you can make a cut.

Materials for the manufacture of tackle

In order to make a tackle "The Killer of the Carp" with your own hands, you will need simple tools and inexpensive materials that every fisherman has.

It will take:

• Several springs.
• 3-5 hooks (No. 6-8).
• Rubber stoppers.
• A line or cord with a diameter of about 0.3 mm.
• Thread or lead fishing line.
• A few swivels with snaps.
• Cargo.

The spring is better to choose the one inside which there is a duct through which you can skip the line. Each spring must be fixed with rubber stoppers at a distance of about 10 cm from each other.

We make the tackle "the killer of the crucian carp" with our own hands

In order to make this tackle, you should attach a swivel to one end of the thread, from which it is necessary to retreat 10-12 cm and fix the bead. To do this, you need to pass a thread through it twice and secure it with a double knot. After that, one more swivel is put on the thread, the second bead is fixed in the same way as the first.

The feeder is put on the thread so that it moves freely along it. Then again follows the swivel, which is fixed with a bead, and another feeder is attached. Such rigging on crucian carp may contain a different number of feeders. The last element should be a bead. After this, a sinker of the required size hangs on the first fixed swivel.

The ready tackle must be equipped with hooks. It is desirable that the length of the leash of each of them is less than 6 cm. In this case, the leashes can be made from a line or from a string.

Features of the manufacture of tackle

When making gear, it is very important to follow simple rules. First of all, use as few nodes as possible. The fact is that whatever knot you knit, the more of them, so the tackle is weaker.

Tackle the "killer of the crucian carp" with their own hands, just to make. However, the maximum efficiency it will have if you use a different bait in the springs. Thus it will be possible to catch not only crucian carp, but also fish of other species.

If springs of the same weight are used, and there is no load at the end of the tackle, the last spring should be slightly heavier than the rest. Only in this way the rig will lie exactly on the bottom, as well as not be confused when casting.

Tactics of catching

The feeder "killer carp" is ideal for fishing on water bodies of any depth and varying flow strength. However, there are certain rules for catching fish for self-made tackle.

First of all, it is necessary to determine the place of casting. To do this, you should immediately drop several feeders in different places. The casting range can be limited if you fix the line on the reel with the help of clips.

We throw gear and wait for them to sink to the bottom. To make it convenient to follow such a rod, it is best to put it on a special stand. When biting, you can notice a quick jerk, and after it - the sagging line. When using self-made fishing tackle for catching crucian carp on the feeder, you can even see a slight bite.

Now you know how to make a "murderer of the crucian carp". You can use this tackle to catch any large fish, for example roach, carp, carp, stickers and other peaceful species.