Technology of laying a soft roof: how to mount euroruberoid

If you want to have a reliable roof, then the technology of laying a soft roof should be carefully observed. To begin with, you should consider its merits. So, such a roof is very convenient in installation, has a small weight, does not require the use of additional construction equipment. In addition, it is very resistant to negative influences, durable and easy to repair.

The technology of laying soft roof provides for preliminary preparation of the base. For example, you need to make a strong crate. It is best if it is continuous. Use for this you can chipboard, OSB or board, laid with a small gap between them. Naturally, the crate must be treated with an antiseptic and fire-fighting agent before laying. She needs to lay a waterproofing film.

The technology of laying a soft roof advises you to start working from the bottom edge. The joints of the material must be placed so that moisture does not have the ability through them to get inside the room. If the roof is not standard, then it is necessary to mount the roof in several layers. Spread strips should be smooth, level and without any folds. To fix, you must use a gas or gasoline burner. In this way, the entire strip fuses.

This procedure requires maximum care and accuracy. It is better to practice with fusing in advance, since without a certain experience the material can either be overheated or it is difficult to melt the surface of the indicator film. The technology of laying a soft roof provides additional pouring of especially complex areas of the roof with mastic.

The overlap of the strips should be about 10 cm. This value may be somewhat larger in the area of the chimney, ridge, ventilation holes. All the places where the material adjoins the roof and the joints of the strips should be carefully examined so that in the winter time the wind can not get under the roof. In addition, poorly laid out finish, it can easily disrupt.

Technology laying soft roof "Technonikol" practically does not differ from the above. Mount it on a prepared concrete or wooden base. It should be noted that the panel of the presented material is quite large, so do not give up the help of other people. Before laying the roof it is necessary to unfold the roll and let it lie so until the sheet is completely leveled. Then it can be twisted back.

Regardless of the type of ruberoid presented, it has high quality and reasonable cost. Mounting is performed by the method of fusing the material onto the substrate. The surface is primed to ensure maximum adhesion to the finish.

Laying a soft roof, the price of which is not high, will be an excellent alternative to other materials, which for one reason or another are not suitable for work. Euroruberoid is a standard of quality, style and convenience.