Rust Removal: Ways

Rust spots are the most resistant and they are not easily removed. Who had to do this, they know that removing rust without special tools is a very difficult task, and the way of cleaning the material depends on the prescription of corrosion.

Today, a lot of different means are made to get rid of plaque, but they should be used carefully, because in the majority they are aggressive, and have detergents, abrasives and acids in their composition. At the same time, for different surfaces, there are methods and means for removing rusty spots.

Rust removal from metal

Work on the removal of corrosion from metal surfaces must begin immediately when the slightest manifestation of it is detected. First, the removal is carried out with a steel brush or sandpaper. You can try a special solution such as a rust converter. To do this, loose layers should be removed, surface treated with solvent or gasoline for degreasing, and then apply the converter to the metal. The color of the surface will gradually become bluish or purple. When working with such solutions, you should take precautions, apply protective equipment, and if acid gets on your skin, immediately wash it with water.

Removal of rust can be performed by electrochemical method. For this, a piece of zinc is attached to the metal, after which everything is lowered into water, acidified with sulfuric acid. A few hours later the rust should go away. After this, the product should be washed and dried.

Quickly get rid of corrosion with a solution of chlorine tin, which for several minutes is treated with a defective surface, and then washed off with warm water and dried. Also, rust removal with orthophosphoric acid is used , which is used as well as the converter.

For the cleaning of metal from a red coating, fish oil is sometimes used. The agent is applied for two hours in a thick layer, after which the rust leaves. In addition, fish oil forms a protective film that prevents further oxidation.

Removing rust from clothes

It is very difficult to remove stains from clothes, because oxides are eaten into fibers and difficult to remove. To restore the original form of tissue, you can use lemon juice. To do this, the lemon slice is wrapped in gauze, applied to the iron and then ironed. Light fabric can be treated with hydrogen peroxide.

Remove rust and produce with vinegar. To do this, in a glass of water, dilute two spoons of warmed vinegar. Cloth with plaque is lowered into this solution and kept for some minutes, after which it is rinsed with dilute ammonia. Colored fabrics are cleaned of rust with a mixture of white chalk and glycerin, which are taken in equal parts. Kashitsu must be applied to the stain and then left for a day, after the thing is rinsed and washed.

Removing rust from plumbing

To prevent the appearance of rusty spots on the toilet, bath or sink, you should carefully monitor that on surfaces there is as little water as possible. At the slightest appearance of rust, the products should be cleaned, otherwise the oxides will penetrate into the enamel and begin to corrode it. Removal of rust is performed with warmed vinegar along with table salt, fat, hydrogen peroxide and ammonia (1 to 10), cleaned with soda solution.

Abrasives (powders, salt, soda) on the enamelled surfaces are applied only with the help of soft sponges, and for acrylic they can not be used at all. For cleaning, it is recommended to take liquid formulations - vinegar, lemon juice or soap. However, rust, strongly embedded in a sink or bath, it is almost impossible to clean, it is easier to simply paint over it.