Creative Christmas tree with your own hands from improvised materials

I want to celebrate the New Year in a good mood. To spend a holiday interesting and original will help the creative Christmas tree. It is easy to make of what is at hand. In a fluffy beauty you can turn napkins, sweets, plates and even pasta.

Creative Christmas tree

It is not difficult to create a Christmas tree from napkins . And it will be so unusual that not everyone will guess what it's made of. The material is very affordable - three-layer paper napkins. First they need to be turned into "roses", and then paste the data of the blanks on the substrate.

So, first make a cone from the paper or cardboard. To do this, cut out the triangle and round it to the hypotenuse. Two legs are glued one on top of the other.

Take the first napkin. It can be green or any other. Do not unfold the napkin, put a round object on it with a diameter of 6-7 cm, circle it and cut it to the measure.

Forming roses and attaching them to the cone

Since the napkin is three-layered, folded 4 times, then you cut out immediately 12 circles, which lie a pile. Fasten them in the middle with a stapler. Now the fun begins. Raise the first circle and fold it in the form of a wick. This is the core of the flower.

Raise the second circle, fold it, marking 4 faces. It should be adjacent to the core, but not very tightly. Twist the third circle in the same way, then all the others. The last, the twelfth, just slightly bend, not lifting it to make it wavy. The flower is ready, glue it to the bottom of the cone.

Make a second rose, attach it in the same way. After the first bottom row, go to the second, placing the rosettes in checkerboard order. But the flowers for him make a little smaller diameter. This applies to the following series. The closer they are to the vertex of the cone, the smaller the diameter of the blanks. Attach the last rose to the top.

You can leave a Christmas tree like this or decorate it with beads, beads, sequins.

The course is colored paper

The next idea is for those who want to quickly make a small copy of a coniferous tree. It can be hung as a mascot and decorations on a glass machine, put on a desktop in the office.

To make a yellow Christmas tree, cut out and glue three blanks for the cone, which differ in size. Put the largest on the table, put on it a smaller figure, on top - the smallest. To fasten all these details together, drip the glue onto the top of the two lower cones, then press it for 20 seconds, placing the workpieces in the designated order - from large to small. If you want to hang a Christmas tree, pierce the vertex with a paper clip and tie a decorative cord to it . You can leave a small hole in the top of each cone, through which you will thread the cord. To keep it firmly, tie its two ends to the knot from the back side.

Three-level openwork Christmas trees made of paper

Almost on the same principle, you can create two more small firs. For the first cut 3 circles, the diameter of each smaller than the diameter of the next. Scissors make fringe on the edges of these figures, you can slightly bend it upward to give a furry to your creation.

On the side of each of the three blanks, make an incision to the center of the circle, overlay the incised sides with a small smell and glue them, but not to the end, leaving small holes in the center. Through them, you will also thread the cord and secure with it the original artifact in the hanging position. Here is the creative tree. With your own hands, you can make the second almost the same, paste confetti on it, glitter on it and arrange a trio of forest beauties, as shown in the photo.

Once a plank, two planks, will be a Christmas tree

A creative Christmas tree from improvised materials turns out very original, when fantasy is connected. If the farm has slats 4-5 cm wide, they will fit perfectly. Since spruce is a triangular shape, cut thin plates so that there is a smooth transition from small to largest. For example, the difference in length between the slats is 10 cm.

Nail to the wall vertically the largest rail, the rest with screws or nails, attach to this horizontally. They should be located symmetrically. Shoot down them at the junction of the middle of the main board with the center of each. Fasten them in the same amount of centimeters.

In addition to one main, which plays the role of the trunk, there are enough 7 boards that will be branches. Here is the creative tree. With his hands it is easy to turn the wooden branches of tinsel, including the crown. On such wooden planks you can hang socks for gifts. If the presents are large, they are placed under the spruce.

Do not throw away empty bottles

Under such a tall tree many gifts will fit. The main thing - do not mischief about him, so as not to break. To create this grandiose magnificence you will need a lot of green bottles, circles of glass or solid clear plastic, plexiglas or plywood.

Start spreading the tree from its bottom. First place a round base on the floor, then put the bottles on it with the neck up. To make the structure strong, it is better to apply a little glass glue to the bottom of the bottles and fix the packaging on the base. Place them next to each other.

From above put a circle of a little smaller diameter than the previous one, put and fasten on it bottles of the next tier. Similarly, lay out the entire tree. On each successive series there will be fewer bottles than in the lower one. When the top is left alone, attach a star, glued from the cork, to it. You can admire the glass tree!

Creative Christmas tree from pasta

Ideas for New Year's fantasies set. Pasta literally in half an hour will turn into a beautiful Christmas tree. In addition to them, you will need a plastic cone-shaped bottle, an adhesive gun, acrylic colors of green and gold.

Cut the bottom of the bottle so that the workpiece is stable on the table. Cover the bottom of the bottle with glue, attach the first row of pasta. To do this, use products in the form of bows, then the creative tree, decorated with its own hands, will look amazing.

Above the first tier, place the second, also glued pasta. Attach them in a staggered manner to the preforms of the first row. At the same time, place the bows vertically. After that, decorate the third and subsequent tiers. Then you will have a charming creative Christmas tree. A master class with photos will help you understand how to do it.

After the whole bottle is covered with pasta, put it on the bottom. If you have a stable round support, you can attach it so that you can see the foot of the New Year's beauty. If not, the tree will look great and so.

Decorating a macaronic miracle

Color bows with acrylic paints or with a spray can. Such paints also dry quickly and are applied evenly. The only thing you need to take care of is not to stain the surrounding objects. Therefore, spray the paint on the street or on the balcony, covering the outside objects with a board or a piece of cardboard.

To decorate the New Year's attribute with toys, take openwork pasta. They can be in the form of stars, circles, letters. A creative Christmas tree, made by your own hands, will help to awaken the imagination, and you will come up with what products of the dough will turn into jewelry. If you do not have such as in the picture, string small macaroni on a strong thread or rope in the form of beads, color them, and then wrap them with a Christmas tree.

This is how the creative tree is decorated and decorated with its own hands. The photo shows what color it is possible to paint and how to attach accessories to the New Year's beauty. To do this, you can also use a spray gun in a can of gold. When it is completely dry, apply a drop of glue on each part from the gun and attach it to the base.

In order to make a star, glue together 5 identical parts, attaching the sixth to the center. Glue them to a long pasta base, fix on the neck of the bottle with a glue gun. Look at how such a creative tree is made with your own hands, the photo shows the nuances of the creative process.

The candy tree

The cone will serve as the basis for the next model. In addition to it, you will need candy in shiny wrappers. It's good if they are green. Attach the first candy vertically, attach it to the bottom of the cone with an adhesive tape. Next attach another, draw a strip of adhesive tape to also glue to the substrate.

After registration of the first proceed to the second and subsequent series. So attach all the candies to the top of the cone. You can alternate the candy tier with tinsel.

If this Christmas tree is handed to an adult, fasten the sweets in the same way in a wrapper not on a cone, but on a bottle of champagne.

Apparently, there are a lot of ideas for creating creative trees. You can make from a variety of improvised means a Christmas tree, which will give a festive mood and allow you to find yourself in a fairy tale!