Repair of gasoline trim tabs with their own hands: tips and tricks

The homestead will not have a neat appearance if bushes grew in its garden and park zone and the grass formed a dense cover. This indicates the neglect of the plot by the owner, who does not do anything even to mow lawns. But grass mowing is the easiest activity on the site, because different techniques have been created for this work.

Advantage of the petrol trimmer

For example, the trimmer is very convenient and productive, light, reliable and practical in use. It can be electric, having a low weight, or gasoline with high performance. Gasoline is more common, since they have a fuel tank and can work remotely from electrical communications. Perhaps the only disadvantage of the gasoline trimmer is that it, like any other equipment, periodically breaks down. But in this matter it has an advantage, since for people who understand a little in technology, it is possible to repair trim tabs of gasoline with their own hands.

Search breakdown

If the trimmer has stopped running, then do not immediately sound an alarm and contact the service center, as the cause of the inoperability can be easily removed. Any repair of gasoline trim tabs with their own hands begins with a check of the presence of a spark, without which it is impossible to ignite the fuel in the combustion chamber. If there is no spark, then the problem is either in the spark plug or in the ignition itself. Exception in those cases when the candle is flooded with a fuel mixture when the fuel is pumped higher than the prescribed level. In this case, you just need to wipe it dry and the cherished spark will appear.

The spark plug will also indicate that there is no fuel supply. If it is dry and light brown, in this case, repairing the gas trimmer yourself will be to debug fuel pumping or carburetor cleaning. All these reasons are easily eliminated, the main thing is that the engine itself works properly. But if the cause of the inoperability still disappears in the engine itself, then it is recommended to contact the service center due to the complexity of the repair. But for people who know how to hold wrenches and a screwdriver in their hands, nothing is impossible. In most cases, the repair of the trimmer motor ends successfully.

Briefly about engine repair

Problems in the engine start after a few years of proper operation from the wear of the components or suddenly if the trimmer is incorrectly used. Unfortunately, it is a pity to misuse it when repairing the petrol trim tabs with your own hands after engine failure. And this happens in those cases when the dosage of oil in the fuel is not observed or the device works up to a terrible overheating. In case of overheating, it is possible to jam the crankshaft, destroy the piston rings or completely burn out the piston ring. In order to perform a revision of the piston, it is enough to remove the cylinder head from beneath which the piston will appear, clearly reflecting the state of its working surface. The rings themselves do not look out of the cylinder, so it does not matter - to change the rings or the piston, in both cases it is necessary to remove the cylinder. Carrying out repair of petrol trim tabs with your own hands, it is worth remembering the fragility of piston rings, which can easily break in the absence of experience. The piston itself to install on the crankshaft is not too difficult. The main thing when repairing the engine is to collect everything the same way it was before the disassembly, and then everything will work again.