Press hydraulic hand - an indispensable assistant in the household

From a wide variety of metal forming machines, it is possible to distinguish a manual hydraulic press. This device for the treatment of metals by pressure with a hydraulic drive, in which the liquid is under high pressure.

With the help of such a device, the method of cutting through the contour can produce details of the most complex shape. For this, a polyurethane is placed in a closed form, called a container. A template is placed on top - a copy of the part to be obtained. Using a hydraulic drive, applying force to the slider, we obtain an imprint of the finished part on the workpiece. With further pressure, the template cuts the part along the contour. The only thing that such parts should not exceed the metal thickness of 1.2 mm.

The field of application in which the manual hydraulic press is used is very large:

- in metalworking (forging, stamping, bending, straightening, extrusion of pipes);

- pressing of powder materials;

- manufacture of rubber and plastic products;

- production of plywood and textolite.

In operation, the force should not exceed 35 tons.

Hydraulic hand press became one of the indispensable home-made machines in the home workshop. Its main advantages are a small price and small dimensions. With minimal energy costs, it is possible to obtain stamped parts of complex shape: by cutting along the contour, punching holes, drawing all kinds of caps, and fixing connections and so on.

The manual hydraulic press has received a wide application for crimping the cable lugs of the sleeves in those places where the cable is connected to aluminum or copper conductors of power supply networks. After performing this operation, the product is marked with numbers, which corresponds to the cross-sectional area of the cable and the press mark intended for a particular type of connection. The crimping is performed by a hexagonal (hexagonal) method.

The hydraulic press manually crimps the cable tips in strict compliance with the marking to prevent tool breakage. For this, a plastic case with a set of hexagonal matrices is supplied with the product.

A large application of a hydraulic hydraulic press was received in car-care centers and service stations. In this case, this device is a small device that creates a high pressure at any point of the car, for example, to straighten the body of the machine.
You can use it to seal, squeeze out unnecessary liquid. Ideally suited are hand presses for locksmith work when fixing an electric motor, inserting bushings, installing gears or dismantling them, bending small parts, pressing bearings and other press work.

The press is a compact metal structure, which consists of racks, lower and upper beams, a frame and a hydraulic drive with a pump and a manometer. The frame is made of profiled steel with a welded rigid structure, which makes it possible to install such a product in any convenient position. To monitor the force generated during operation, a sensor is attached.

Such a convenient and practical adaptation can make for yourself any home master.