Organza skirt for a girl with her own hands: description, ideas, master class and feedback

Fatin, organza, veil, tulle - a delightful material, airy. A skirt of it for a girl is much more than just an outfit. She is the embodiment of magic, fairy tales. Any mom is able to make such a gift, like a skirt made of organza, for a girl with her own hands. It takes a little time, a desire, a fantasy.

Every day ballet

The skirt-tutu as at the ballerina - an embodiment of romanticism, airiness, elegance. Recently, it is perceived as a practical thing. It looks very easy (like the ballerina herself), gently rocking on a female figure. Made from lightweight fabrics. The volume is adjusted by the number of lifters.

Today the classic tutu is a very fluffy skirt up to the knee. It is not an everyday dress, but it is widely used in photo sessions, New Year holidays, parties. But this applies to adult women. And the sewn skirt from organza for the girl with her own hands looks very delicious in any setting.

Tips for sewing from organza, tulle, tulle, veil

Before starting work, it is worth studying several features on the technique of sewing from air fabrics (for simplicity and correctness of the process).

1. Do not sew too long stitches. Fabric in this case will be added. If the stitch is too small, the thread may become stuck in the sewing machine plate. The stitch of the optimal length is 2.5 mm.

2. Use as often as possible and more pins, if the fabric is attached manually.

3. During the manufacture of the product, it is necessary to constantly iron it. Ideal - after each seam. The seam allowances are pressed on one side. The temperature is set to minimum. So the fabric will not be deformed.

4. If the material is attached to the sewing machine, the longest straight stitch is placed. The tension of the lower thread must be loosened. So the fabric will be automatically attached. Remains only to watch, so that the thread does not tear, the line was straight.

Skirt tutu for the girl: DIY with your own hands

The simplest option is without sewing. It is ideal for a beginner seamstress who can not decide to start a complicated thing, and for those who are in a hurry. You can make a monophonic skirt or use all the colors of the rainbow.

Required material:

• Multi-colored (monophonic) organza, tulle;
• Elastic tape;
• Thread.

Fabrics need to be taken more, so the skirt will be more magnificent.

Process description

How is a skirt made for a girl with her own hands? The master class is presented below.

The first thing to do is sew an elastic band. To do this, its ends are superimposed one on top of the other and are worn twice. Can be hand or sewing machine. Then the fabric is cut into strips. Width - 60 cm, length - double length of the skirt.

A strip of fabric folds in half - so that a loop forms at the top. Then it is applied to the elastic band from behind, and the open lower ends are wrapped up, stretched through it and carefully tightened. The band of fabric should lie flat.

Then, on the elastic band, the next strip is tied to the first by the knot. If you use a multi-colored fabric, you must alternate each time. Tie bands on the elastic band should be tight to each other.
So, the skirt of the pack with your own hands for a little princess is done! Quickly and simply!

Classic model

Let's consider in detail how the skirt-tutu from a tulle is sewn by the hands for the girl. How to make its lower part three-step, and the upper one - half-sun?
Required material:

• Tatin;
• Fabric for the skirt;
• Beika slanting;
• Elastic tape;
• Thread.

Manufacturing process

First, we cut the material. The lower skirt will be three-step. The width of the panels is 150 cm, the length is 30 cm. The first (upper) step will consist of 2 parts, the middle one - of three, the lower one - of five. As a result, you should get 10 cloths.

The length of this skirt sample is 87 cm. If the article is made longer or shorter, the cloth consumption will increase or decrease. The number of cloths can vary depending on how luxurious the skirt will be.

Next, the cloth must be worn in a ring. For this, we put them face to face and we spread the side seams. Allowances are swept together. The seam is 0.5 cm wide. For the upper ring we weak two panels, for the middle one three, for the lower ring five. The result is 3 different in diameter. All allowances must be ironed, swept.

We process the lower edges. There are two options. The first one is a bend manually or on a typewriter. The second is oblique.

Then we put all the steps together. How to do it? First, we measure the width of the lower cut of the second stage. At this length you need to attach the top of the third skirt. To do this, the stitch is sewn with long stitches manually or on a typewriter. Thread the stitching string. The length of the top of the lower step should be equal to the lower cut of the middle skirt. The ends of the threads are knotted. Puncture the sides of the lower stage and the middle with pins. We are. We remove the threads, we sweep the allowances, iron. Similarly we enter the middle and upper steps of the skirt.

The next step is to process the upper edges of the skirt. Here you can apply 2 options.

1. Sweep with a zigzig stitch (or use an overlock). Cut the ribbon to the required length. Stitch the ends. Mark 4 segments (same) on the tape and on the upper section of the first stage. Pins to cut the tags. Attach the ribbon to the cut, stretching it in the process so that it lies flat between the marks. Ensure that assemblies are distributed evenly. The lower edge of the tape is additionally swept, picking up the tulle.
2. It is sewed under an elastic band of a kulisk. Next - the upper skirt, the upper section of which is connected to the stepped one and processed as one piece. On the wrong side, turn the upper cut first by 0.5 cm, then another 1.5 cm. Sweep. Kulisku stitched in the edge. In the seam leave a hole where the tape will be passed. Stitching in the ring. Sew a manual sewing.

Final stroke

Now you can proceed to the top panel. The fabric is taken any. First, a pattern is drawn for a skirt-half-sun. There will be two lateral seams. The pattern is superimposed on the fabric folded in half, so that the dashed line coincides with the fold. So make 2 canvases. Then lateral sections of the upper skirt are wiped off. The seam allowances are swept and ironed. The lower edge is bent twice to the wrong side and is attached. Then it is necessary to mark out 4 segments on the upper cut of the skirt, on the kulisk (or elastic band). Next, the trimmed upper skirt must be connected with the stepped skirt and sew the kuliska. Done!

Also sewn and a skirt from organza for the girl own hands.

The dream of any girl

From early childhood, every little princess was fascinated with dresses like dancers. The dream of any mom is to make such a product as a magnificent skirt-tutu with your own hands. The master class on its tailoring is presented to them in the help.

What you need:

• 2,5 m of organza;
• 0.5 m stretch;
• An elastic band (2 cm wide);
• Thread.

Now we take measurements and start sewing. We need to start with a ruche. To do this, we cut 13 bands with a width of 10 cm along the oblique of the organza. We cut it.

The edges of each strip must be machined on both sides with a "zigzag" line. You can use the overlock. To the wave was beautiful, you need to stretch the fabric lightly. The bands are ready. We set them aside.

Then from any stretch we cut out a rectangle 80 * 25 cm, we sew it in a ring. The basis is obtained. On it exactly in the middle we impose ready strips. We lay the skladochki and do them more often. So the skirt will turn airy, lush. Ruches need to be closed in a ring, the ends are hidden in the folds. Press the first stitched row on one side, so it will be easier to sew the next ones. The distance between the stripes is 1 cm. We decorate the skirt row by row. The latter is honed from the edge at a distance of 6 cm. We bend and make a kuliska, into which we insert an elastic band.

The organza skirt for the girl with her own hands is made!