Pattern of trousers: step-by-step construction

Without trousers it is difficult to imagine a modern wardrobe not only for men, but for women. A huge variety of styles, materials allows you to always look stylish, fashionable and attractive. Not only can you buy pants, but needlewomen have the opportunity to sew them, and even if there is no professional skills, but there is a pattern of pants, it is necessary to have a new beautiful thing in your wardrobe or family members.

Pattern of sports trousers

Having measured precisely the sizes and having made correct calculations, it is possible to make a curve on which then to update a wardrobe it is possible. But at the same time, still introducing new details, so that this product is also different in its individuality. You will only have to accurately cut the pants on the fabric, and then sit down to sew.

Sports pants - clothes indispensable in gyms, at home, on the backyard, in hikes. Knowing how to sew them, you can learn how to sew and pajama trousers. Since in these pants usually work, exercise or travel, they have a heavy load, and very often you need to purchase new ones. But the old can be ripped off - that's the ready pattern of sports pants. But to collect them correctly will also require skill.

Required Measurements

Nevertheless, before you cut, you should measure the waist, hips, and the required length of the leg. Counting the amount of tissue, you need to take into account the volume of the hips: if they are less than a 100-centimeter mark, then the material is required along the length of the leg. The length of the trousers is measured to the floor, and if there is an idea to stretch the elastic on the bottom, you need to add about 10 cm.

If the fabric is very thin, then, for example, with a width of 110 cm, the width of the trousers should coincide with the width of the material, and along the length - with a total length of the product multiplied by two.

The layout must be done, considering the extensibility of the fabric. If the material is of such quality that in time there is no threat to stretch it, you can cut it as it will be convenient. This primarily applies to synthetic fabrics.

But natural fabrics assume a certain cut - along the warp thread, then the trousers will be located parallel to the edge of the fabric.

The parts cut out with a small margin are folded together and fastened with pins.

It is necessary to sweep the darts that are on the waist and bottom lines. Then the belt is worn and the cuts along the sides are processed. At the waist and at the bottom of the trousers is inserted a cord.

Pants with a rubber band

If you need to make a pattern of pants on an elastic band, this process will not cause any special difficulties, since the tailoring is quite simple and it does not take time to do calculations for additional details.

To begin with, you will need data that can be obtained by measuring:

• Girth of the waist ;
• Girth of hips, immediately should be recorded and poluobhvat;
• Distance from waist to hip;
• Girth of the leg to figure out the width of the leg;
• Length of trousers, you will need to know the distance from the waist to the foot.

Knowing all these data, you can make a pattern on millimeter paper.

The first padded horizontal line is the waist. A perpendicular line drawn at the intersection point is marked with letter A, and point B is placed in parallel. The obtained segment AB is the length of the trousers.

It is necessary to postpone the segment AB, which is equal to the hemisphere of the thigh, taking into account the allowance up to 8 cm, and through the point B to draw a straight line horizontally - this is the thigh line. Now the middle of the BV segment is marked, from this point it is deposited 4 cm upwards, and the point K is put. A horizontal line is passed through it, defining the knee.

Now you should give time to the waist. From point A to the right there is a point F, it is calculated by dividing the semicircle of the waist into 4 parts, the resulting total will be a given distance. Add extra centimeters to the allowance.

To the left of A, the point T is at the same distance, and an allowance is also necessary.

The hip line is made this way. From B to the right we put the point W obtained in the calculation of the fourth part of the semicircle of the thighs. In the opposite side, at the same distance, point A is noted with an allowance of up to 11 cm.

The bottom line. From the point A to the sides, distances equal to half the width measurement are noted. The lateral seam of the line is drawn smoothly, resulting from the intersection of the points A and T. Then it must be connected to the bottom point. From the point Г, the perpendicular to the femur line is drawn, retreating to the right by 2.5 cm, it is necessary to bring it to the point S. The gulph is obtained by connecting G and III.

Rear part. From A to the left lies a distance equal to half of the half-circle of the waist. This is the point D. Allowance up to 18 cm.

Thigh line. The BM segment is deposited left and right, they are equal to half the semicircle. The allowance will be 16 cm. From B to the bottom line will pass the line of the lateral seam.

Baby pants

Moms love to sew for their children, because making children's pants for a pattern for them is not a problem. The child grows quickly, so it is better to rip out old pants and make them new, given the larger size.

The fabric is suitable any. If it's summer time, then it's better to take an easy one.

The material should be folded face up, then pinned with a pin pattern. We should not forget about the allowances. On the front half, you can make a shelf, after it is cut off, it needs to be turned around so that its wide part is located at the side.

The cut out front part and the shelf are hooked, on the front side the shelf should be bent, stitching with a simple seam. Then the two halves are connected and bred.

For the belt should be a strip of fabric, equal in width to the trousers. It is necessary to attach a dense tape to the reverse part. Now you need to insert an elastic band so that it does not squeeze the stomach, but it was not too loose.

Doing a pattern of pants for the boy, you need to think about how many and what pockets will be. It is better to make them with small bevels, and so that they do not come off, it would be good to put rivets with special devices. To create pockets, rectangles of the same size are cut out, tucked and sewn.

Merck

In order to sew pants for men, you need to know what style he prefers. But whatever style he likes, you will need in any case a pattern of men's pants.

To create a basic pattern, you need to remove such measurements as:

• Distance from the waist line to the plane of the seat;
• Girth of the waist and hips;
• Length along the inner surface;
• From the waist to the floor;
• Trousers width.

The whole construction of the pattern is based on the following algorithm. A vertical line is drawn on which the point T is marked. A horizontal line passes through it-the waist line of the front part.

From this point downward is marked point W, equal to the distance from the waist to the plane of sitting. A horizontal line is drawn through it, that is, the step line.

The bottom line is formed with the help of point Ш, from which the length of the leg along the internal seam is marked down, is marked with the letter H. The obtained segment W is divided into two parts, and above the designated point by 5 cm the point K is obtained, through which the horizontal should be drawn, which will give the level Of the knee.

A fourth part of the diameter of the thighs is laid upward from above and marked by point B, passing through it a horizontal line, you can get a line of thighs.

Pattern pants algorithm

Front of the trousers. From point W the point W _{1 is} deposited on Lines Step, it is equal to half the volume divided by 4 with an allowance of up to 0.5 cm. To the left of it is measured W ₂ : the half volume is divided by 8 plus 0.5 cm.

A line is drawn up from Ш ₁ upwards, and where B1 meets the hip line, point B ₁ is marked, with the waist line - point T ₁ . From her along the waist line is laid 1 cm and put the point T ₂ . It measures the distance equal to the fourth part of the volume with an addition of 0.5 cm along the waist line. Thus, the point T ₃ arises.

Then the fourth part of the hip circumference is laid to the right of B ₁ , the point B _{2 is} obtained.

From point H on both sides is marked by a point at a distance equal to half the width of the trousers down minus a centimeter. New points H1, H2 appear. From them upwards are the lines that intersect with the line of the knees - K1 and K2.

The lateral line is formed after H2, B2, T3 and K2 are connected by a segment, the K2B2 line makes a deflection by 0.5 cm.

Designing the back of the trousers

Back of trousers. From the point W1, the fourth part of the distance Wl1 is deposited on the right-hand side. It is put III, and from it goes a straight line, intersecting with B3 and T4. From B3 the distance B3T4 is postponed, B4 is obtained.

To obtain the extreme point, it follows from W2 to the left side to measure half of WlW2, obtaining W4, and from it note the distance of 0.5 cm.

If now measure along the waist line 2 cm to the right - there will be T5, and at the same distance up from the new point - there will be T6. The middle part of the trousers is obtained when M5, B4, and T6 are connected.

The waist line is obtained by holding the line through T6 to the intersection of the waist line - it will be T7.

The segment T6T7 is divided in half, where the T8 appears, from which the taps are marked in both directions.

The level of the knee. In both directions, lay 1 cm from K1 and K2, these are the points K3 and K4. From H1 and H "to the right and left for a distance of 1 cm will be formed H3 and H4.

A lateral line of the rear part passes through H4, K4, and T7.

The pattern of women's pants is created the same way.

Clothes for dolls

To give children a good mood, moms try not only to buy beautiful toys, but also to sew their clothes. No exception and trousers for dolls. To make the product successful, you need a pattern of pants for the doll.

To do this, you need the length of the trousers, given several centimeters for the hem, the waist. The width of the hips in the most prominent places will also be required, as well as the depth of planting, which is measured as follows: the doll should be planted, measured from the waist to the surface on which it sits.

Conclusion

When sewing a pattern of pants is necessary, only in this case they will sit perfectly. Many women enthusiastically come up with models, decorate pants with embroidery, rhinestones, beautiful appliqués. This is noticed by others, admiring the talent and imagination of the needlewoman.