Mounting the mounting on a snowboard: practical recommendations

Installing mounts on a snowboard is quite a challenge. By setting up platforms for shoes on a new board, riders often have to go through numerous options that differ in positions, angles, centering of the legs. Let's figure out what the correct installation of mounts on a snowboard is and what differences exist between these or other solutions.

Choice of driving leg

Before you begin to mount the mounts on the board for snowboarding, you need to decide which foot is more convenient to move forward along the slope. To do this, you can use several tips.

Sometimes it's enough to imagine yourself sliding on an ice rink. The main question: what leg will be in front - right or left? The second test is aimed at determining the side of the hull, which will be deployed to the nose of the snowboard during the movement. To determine the parameter, you need to try on the door leaf, trying to dislodge it. Which shoulder will be more convenient to cope with the task, that side is the leader in snowboarding.

If it is determined that the right foot should look forward, in this case the mounting of the mount on a snowboard of the appropriate nature is made closer to the bow of the platform. Accordingly, the installation of the left fixture is carried out in the tail area. Otherwise, everything should look exactly the opposite.

Correction of corners

Mounting the mount on the snowboard requires adjusting the angles between the transverse axis of the board and the axes of the fasteners. Often the optimal position is indicated on the basis of individual products. At the same time experienced riders prefer to change the parameter depending on personal preferences and style of riding.

To expose the appropriate angles of mounting snowboard mounts, it is initially necessary to easily screw the existing fasteners to the board, and then turn them in the desired direction.

If the rider does not have specific preferences, it is recommended to set the corners in the standard position of 18 ^° for the leading leg and 3 ^° for the rear. However, it is possible to adjust the parameter at any time, as soon as such a need arises.

Centering the rack

Mounting the mounts on the snowboard assumes the correct centering of the shoe on the plane of the board. This is required to transfer forces to the front and back of the product. Among other things, centering reduces the likelihood of hooks on the heels and toes of shoes on snow and, accordingly, eliminates injuries.

To cope with the task, it is enough to move the fasteners perpendicular to the board through special holes. Determine the optimal position can be, pre-wearing shoes and placing his feet on a bare board without fasteners.

Width of rack

It is extremely important that a suitable mounting width is determined. Snowboarding is necessarily selected in accordance with the growth of the rider, which ultimately affects the location of the legs at a certain distance from each other.

Usually, the width parameter is set based on the distance between the ground and the knee cap of the rider. To determine with the characteristic also allows measuring the width of the shoulders.

Correct setting will allow you to feel better control of the board. Mounting the mount on the snowboard in the widest possible rack adds stability, but does not allow for short sharp turns. On the contrary, the narrow stance makes the rider less stable, but gives the opportunity to enjoy all manner of maneuvers.

Fixing the platform

After the implementation of all the above recommendations, it is necessary to fix the platform stably. You can cope with the task by holding the fasteners in the desired position with your hand or by performing the appropriate marking on the board.

It is easier to install the second fastener. It is enough to copy the settings that are made on the leading platform.

Mounting mounts on a snowboard depending on the style of riding

After gaining the experience of riding and feeling of confidence, it is worth trying to adjust the position of the mounts for individual driving styles. So, the universal rack assumes a turn of a leading platform in position from 15 to 25 ^о , and back - from 0 to 15 ^о .

Common is the carving stand, which is suitable for performing long, verified turns with the maximum inclination of the body to the ground. For this platform is installed under an impressive angle, which provides a smooth turn of the body during the movement. The front attachment here is set to a position from 30 to 45 ^° , the rear mount from 15 to 25 ^° . To more sharply perform turns, you can slightly move the anchorage closer to the center of the board.

A distinctive feature of adjusting the fasteners for freestyle is the installation of platforms under the negative or zero angle with the separation in opposite directions. Conveniently this is primarily for all kinds of turns and spins. The freestyle stand contributes to the increased control of the balance of the body and the more convenient movement of an uncomfortable foot forward.

If it is necessary to move as smoothly as possible on the virgin land, it's worth to put it into the position of the freeride, which implies their shift towards the back of the board. The angles here range from 5 to 15 ^° for the hind leg and from 15 to 30 ^° for the front.

Finally

Get the notion of the correct location of fasteners allows regular practice of riding in different styles. Experimenting on the racks and corners of the platforms, you can eventually come to the choice of the optimal position, which will provide the most comfortable sensations and ultimate control over the board during the ride.